Andrew Smith287 Custer Street, Hopewell, PA 00000
- Supervise, coordinate, or schedule the activities of construction or remodelling specifications.
- Coordinate work activities with other construction project activities.
- Estimate material or worker requirements to complete jobs.
- Analyze worker or production problems and recommend solutions, such as improving production methods or implementing motivational plans.
- Provide assistance to workers engaged in construction or extraction activities, using hand tools or other equipment.
- Coordinate with other professionals, such as contractors, architects, engineers, and plumbers, to ensure job success.
-Cut, bend, and weld, and finish both flat stock and sheet metal.
- Deliver and install finished product, often times communicating with the clients and contractors.
-Cooperate with coworkers to double check all projects before they are delivered or turned over to the client.
-Took the POV blueprints of an overall area and turned them into specific blueprints for each cabinet in that area using story poles.
-Assigned tasks to coworkers based on their skill level and in the right order to make sure nobody is ever standing around.
-Determined what the best or most efficient type of joinery was to be used for certain projects.
-Often delivered and installed the finished product, which usually involved communicating with the clients.
Self motivated and a very good independent worker as well as with a group. Trained in confined spaces for welding work, small forklift or bob cat operating. Knowledgeable of fall protection and properly trained on safety, previously OSHA certified.
Basic knowledge of hand tools and machine tools, as well as knowledge of rigging work such as cables and chains to hold down structural materials
- Fast paced production welding on oil tanks, batteries and filters.
- Cut and Fit and clean tank rings to top and bottom lids with precise measurements.
- following proper safety precautions while using harnessing to climb inside the tanks and weld out the entire lid to the shell.
- Layout on shell of tank including specific measurements for flanges, couplings, d-rings and lifting attachments.
- Overhead crane operating is apart of daily work for moving tanks.
- Maintain clean work environment while getting work done in a timely manner with the best quality welds possible.
- Cutting metal to size with plasma cutters or Acetylene and oxygen cutting torch.
- Fabrication of special metal parts to get any job done.
- Welding, fitting, and assembling cattle feeders, custom trailers, custom truck hunting stations, and custom work on vehicles.
- Forklift operating to move necessary parts across shop to assist in the building of the project.
- Grinding, cleaning all metal properly to ensure a clean and well penetrated weld on all metals.
- Out of town traveling for installation of products built in shop
- Hand welder/fitter of webbing for bridge girders
- Machine sub arc operator, sub arc welding all webs to form the girder
- Properly clean all metal and use precise measurements to fit girder ends to one another.
- Lay down a fillet weld with 8011/9011 rods to secure girder ends.
- Clean all welds and start the sub arc process
- Operating overhead cranes to move materials
- Grinding off mill scale and cutting stiffeners for the girders to size
- Cutting metals to fit specific measurements for the construction of boat docks, carports, garages, trailers, and steel sheds.
- Ordering parts from local steel shop as needed for the job.
- Welding and fitting angle iron, I beams and channeling according to blue prints to construct the project.
- Painting and cleaning metals to meet the requirements of the buyer.
- Bolting together steel where necessary to hold down support beams to steel plates (required for standing support of boat docks).
- Forklift and mini excavator operating to pull dirt and clear out any unnecessary materials .
- Designing ideas for water fronts, lawn fountains, fencing, leveling ground or building slopes (varies by project)
- Mini excavator operation to level ground or to dig holes for pond retaining walls, laying down fencing and forklift operation to move larger materials without damage.
- North Doyle Academy - Rathfort, Missouri
Not in love with this template? Browse our full library of resume templates
Welding is a metalworking trade with a history that stretches all the way back to ancient times, specifically to the Bronze Age. In fact, the earliest examples of welding are more than 2000 years old! Needless to say, welding has transformed significantly over the years as a profession, especially with the development of new techniques and machinery.
So what is the modern-day job scope of a welder? As Career Explorer explains, “A welder is a skilled tradesman who joins metal together, or fills and repairs holes on metal constructions through the use of intense heat and gas. Welders work on all types of industrial, manufacturing, and construction applications; some even work underwater to repair oil rig foundations, ship hulls and other types of subaquatic structures.”
Given how crucial welders are in a variety of industries, it’s no wonder they’ve stood the test of time. That being said, future job growth in this sector isn’t exactly rapid. According to the Bureau of Labor Statistics, employment of welders is projected to grow 3 percent from 2018 to 2028, which is 2 percent slower than the average for all occupations.
So what can you do to secure a long, bright future as a welder? You need to create a resume that screams “Pick me!” to recruiters. The only thing that’s standing in your way of doing so is your lack of insider resume-making knowledge. Fortunately, you can read the following welder resume example and guide to get up to speed. It will teach you exactly what you need to do in order to create an unbeatable welder resume including:
- The 6 essential sections every welder resume must have
- Which skills and achievements are most valuable to include
- How to correctly list additional training and certifications
- Tips to keep in mind if you’re an entry level welder
- How to create a professional resume in minutes
1. Multiple Template Examples
2. How to Write a Job-Winning Welder Resume
How should you format your resume?
When a recruiter scans over your resume, one of the first impressions they should have is how logically organized it is. The resume format that’s been shown to make recruiters think this is a reverse-chronological format. After all, it’s the most common resume format around as it’s considered to be most recruiters’ top pick.
The reason reverse-chronological format is ideal to use if you’re an experienced welder is because it makes the growth you’ve undergone as a professional crystal clear to a recruiter. The format does this by ordering your work experiences from your current or most recent position and then working backwards from there.
When you’re in the midst of formatting your resume, you’ll also need to be mindful of the optimal resume layout to use. You won’t want to tinker with standard layout guidelines if you want to impress. We’ve highlighted the best practices for welder resumes below:
- Number of Pages: One only.
- Fonts to Use: Standard fonts that are well-known to recruiters such as Verdana and Calibri.
- Fonts to Avoid: Any fonts that appear childish, such as Alba and Jokewood.
- Margins: 1 inch on all sides.
- Line Spacing: 1 or 1.15.
- Header size: 14-16 point size.
- Text size: 11-12 point size.
Which sections should be included in a welder resume?
Before hitting the “send” button to submit your job application, you'll need to ensure your resume includes all of the sections a recruiter will be expecting to see. We’ve listed the 6 fundamental sections that every welder resume should include below:
- Contact Information: Include standard contact information at the top of your resume such as your name, phone number, email address, and home address. It’s also helpful to include your LinkedIn profile URL.
- Resume Objective or Resume Summary: A concise overview of why a recruiter should view you as the most suitable welder for the position.
- Employment History: An insight into your most relevant professional experiences. For each job, include the name of the company, your position, your most impressive achievements, as well as the period of time you worked there.
- Education: Vital details about your relevant educational background.
- Training and Certifications: Details about any training and certifications you’ve undertaken to develop your skills and knowledge as a welder.
- Skills: A list of hard and soft skills you possess that a recruiter would be interested in learning about.
Pro tip: In most cases, it’s not necessary to include any information about your hobbies, interests, or volunteer in your resume. Only include sections about them if you’re requested to or if you’re an entry level candidate whose resume is looking very bare. If you must include any of these sections, try to make them as relevant as possible to welding.
Where should you include additional training and certifications you have as a welder? How can you do so correctly?
Welding is a profession in which you never stop learning. If you’ve undertaken any additional training or certifications that show off your efforts to develop professionally, it’s crucial to feature them front and center in your resume.
Even though it’s not mandatory for welders to receive any particular formal training or certifications, recruiters are known to look favorably on candidates who have taken the initiative to further their welding skills and knowledge.
There are a variety of training and certifications you can include to seriously strengthen your resume. For example, the American Welding Society offers the following national certifications:
- Certified Welder
- Certified Welding Engineer
- Certified Robotic Arc Welding
- Certified Welding Inspector (CWI)
- Senior Welding Inspector (SCWI)
- Certified Welding Educator (CWE)
- Certified Resistance Welding Technician (CRWT)
- Certified Radiographic Interpreter (CRI)
- Certified Welding Supervisor (CWS)
Your workplace may also have offered in-house training. Given the importance of safety in the industry, you should also consider adding any internal or external safety training or certifications.
In order to list any relevant training or certifications you have to your name, add them to your resume’s “Training and Certifications” section. When you’re working on this section, make sure to avoid writing extensively about your experiences like this candidate did
TRAINING AND CERTIFICATIONS
I can now proudly call myself a “Certified Welder” after attending and completing the American Welding Society’s Certified Welder Program in 2019. In order to receive my certification, I had to meet a number of requirements including completing a welder performance qualification test. It was a very challenging program, but I made it in the end!
The problem with the above example is that it’s far too wordy and includes a lot of unnecessary detail a recruiter won’t have time to process.
To correctly list your additional training and certifications, provide the following key details in list form:
- The name of the training or certification
- The institution or company that provided it
- The state it was held in
- The year you received your training or certification
With this in mind, the correct way of writing the above candidate’s certification is as follows:
TRAINING AND CERTIFICATIONS
- Certified Welder Program, American Welding Society, California, 2019
Pro tip: If you believe it’s relevant to share more detailed information about a training program or certification you undertook, why not do so in your cover letter?
What skills should you mention? How do you correctly do so?
The skills you mention on your resume should be a direct reflection of the skills a recruiter is seeking from their ideal candidate. In other words, the skills you mention should be relevant to the specific job you’re applying for. The good news is that figuring out which skills a recruiter values is easier that welding two pieces of sheet metal together. All you need to do is scan the job ad for keywords.
Keywords is a term used to describe the words in a job ad that represent the qualities a perfect candidate has in the eyes of a recruiter. As the expectations for each job will change, the keywords you will find in each job ad will too.
In order to find the skills a recruiter is after, look for skills-focused keywords. Keep in mind that these skills won’t just include technical welding skills, aka “hard skills.” They will also include interpersonal and communication based skills, which are known in the HR industry as “soft skills.”
To give you an idea of the hard and soft skills you may come across in your job search, take a look at the examples below. We scanned real-life job ads to find them, so they’re as legitimate as it gets!
- Operating grinding equipment
- Performing full penetration welds
- Welding broken or cracked parts of machinery and equipment
- Preparing surfaces for welding
- Removing slag from the weld line
- Preparing sketches and basic reports of work performed
- Driving and stocking a welding truck
- Setting up welding equipment including semi-automatic and/or machine guided welding machines
- Adjusting equipment to proper voltage and amperage for the type of welding to be performed
- Reading blueprints
- Observing all standard safety practices
- Team player
- Oral and written communication abilities
- Ability to follow instructions
- Working well under pressure
If you’re now wondering if you can just sprinkle your resume with the keywords you find and be done with it, the answer is a strong, “No!” You’ll need to first work out which ones you hold and then incorporate them strategically into the following 3 sections:
- Resume Objective or Resume Summary: Include 1 or 2 stand out skills you possess that you’d like the recruiter to know you have from the get-go.
- Employment History: Focus each achievement around 1 or 2 skills (more on this below).
- Skills: Include 6 to 8 relevant skills in a list form.
Pro tip: Considering that there are over 100 different welding methods, it’s important to be specific about which ones you’re skilled in.
How to highlight your achievements
Highlighting your achievements doesn’t need to be a headache if you know what you’re doing. The secret to selecting the right achievements is to choose those that will allow you to naturally incorporate keywords found in a given job ad. To learn more about keywords, make sure to read the section above.
It’s crucial to be natural when incorporating keywords because a recruiter will turn completely off your resume if they catch you keyword stuffing. Keyword stuffing describes when a candidate artificially adds keywords into their resume.
They may do this in an attempt to trick an applicant tracking system (ATS) into passing their resume. ATS is a human resources software many recruiters rely on to vet candidates’ resumes. It will analyze the suitability of each resume for a given role based on the presence or absence of keywords. While a candidate who keyword stuffs may initially be able to get away with it, a recruiter will catch them out eventually.
So what does keyword stuffing look like? Check out the following candidate’s achievement:
- Demonstrated thorough knowledge of safety standards as well as understanding of safety standards in all tasks.
We’re sure you’ve already worked out that this candidate was trying to keyword stuff the keyword “safety standards.” Given that they repeated it twice for no good reason, a recruiter would be able to instantly tell that they were trying to manipulate the ATS.
However, keyword stuffing isn’t the only reason a recruiter would be completely unimpressed by this achievement. It also doesn’t offer anything that would captivate a recruiter’s attention. After all, the candidate simply states the fact that they have knowledge and understanding of safety standards, but doesn’t provide an example of this in action.
As a rule of thumb, you should illustrate each achievement with a tangible example that makes it clear why it’s an achievement in the first place. You’ll get extra points if you can quantify your achievements with relevant numbers and statistics.
To recognize the impact doing so could have for your resume, we’ve rewritten the above candidate’s achievement with this in mind. Take a look at it for yourself:
- Demonstrated thorough knowledge and understanding of safety standards, resulting in a 100% safety rating in my employee reviews.
As you can see, providing an example to support your achievement – especially one that quantifies it – can make your achievements shine. Be sure to keep this in mind when you’re ready to write your own!
What physical requirements will you need to address?
When you’re analyzing a job ad, you’ll also need to keep your eyes peeled for any physical requirements that you’ll need to possess in order to be considered.
For example, one job ad we found stated that candidates must be able to:
- Adhere to large amounts of standing, walking, bending, squatting, sitting and lifting.
- Use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
- Lift, carry, and move a certain amount of weight.
- Work at a certain height, climb ladders and stairways, and work off of platforms.
- Work in weathering conditions.
If you find any physical requirements in a job ad, make sure your resume makes it clear that you meet them (unless the recruiter asks you to address them in your cover letter instead). You can do so by incorporating them into your “Employment History” section. If appropriate, you may be able to feature a few in your “Skills” section as well.
How do you write a resume objective or summary? Which one should you use?
What if we told you there’s a section of your resume that can reframe how a recruiter views your entire application? This is exactly what a well-written resume objective or summary can do in just two to four sentences.
For recruiters, these sections offer an insight about candidates that they might not otherwise be able to obtain. For candidates, these sections provide an opportunity to explain to recruiters why they’re worth considering for a given position.
But before you start typing up both, you should keep in mind that you will only need to include one. So which one is most suitable for you? The answer couldn’t be more straightforward: If you’re an entry-level candidate, create a resume objective; if you’re an experienced candidate, create a resume summary. You can discover more about each one as well as some helpful good and bad examples below.
Recruiters can often spot an inexperienced candidate’s resume from a mile away due to how they write their resume objective. This is because inexperienced candidates tend to provide wishy-washy overviews of themselves that do little to draw the recruiter in. They also tend to convey a sense of desperation to get hired, even if it isn’t their intention to do so.
Take a look at the following candidate’s resume to get an idea of what we mean:
- Aspiring welder who is looking to get some professional experience in the world of welding. I have a number of great qualities that would make me a fantastic welder. I really want to work for Welding Plus and I would give anything to get hired.
If you were a recruiter, would you be interested enough to keep reading this candidate’s resume? Most recruiters would immediately give their whole resume a hard pass based on the fact that this candidate failed to frame themselves as a desirable candidate.
All the candidate has basically communicated to the recruiter is that they’re an aspiring welder who wants to get more experience. While they stated that they would “give anything” to get hired, they didn’t even bother to give the recruiter any indication of what the so-called “great qualities” they offer are.
The following candidate’s resume objective is a whole nother story:
- Highly-motivated aspiring welder who completed a rigorous 6 month apprenticeship at Welding Experts. I was commended for my skills in reading blueprints and preparing surfaces for welding as well as my dependability. I am eager to work for Welding Plus so I can harness these skills and forge a bright future at your company.
This candidate made the effort to offer the recruiter a deep but concise look at who they are as an aspiring welder. While this candidate is also inexperienced, their resume objective doesn’t overemphasize their lack of experience. Nor does it paint them as being desperate for a job – it instead conveys how enthusiastic they are to get their foot in the door and start working hard for Welding Experts.
Another one of the many stand out features of this resume objective is that it’s been specifically created for the particular company. The prior candidate didn’t even mention the company’s name, which is a telltale sign that they simply use the same resume objective each time. Recruiters despise generic resumes, so be sure to create a custom resume objective every time you apply for a new job.
Likewise to this candidate, you will also need to ensure that your attributes shine brightly in your resume objective. You can do this by focusing on any relevant experiences you’ve had. Even if you haven’t undertaken an apprenticeship like this candidate has, you can still mention the relevant hard and soft skills you offer. You can also highlight any relevant courses you’ve completed or any other eye-catching details that a recruiter would find relevant to discover.
The downfall of many experienced candidates’ resume summaries is that they say a whole lot of nothing. Perhaps this is because they assume that recruiters will get the detail they’re seeking when they read the rest of their resume.
The thing is, a recruiter might not even read on if they’re not impressed with your resume summary! After all, why would they bother doing so if they can instead spend their time reading the resumes of candidates who took the care to craft a meticulous resume summary?
If you’re wondering what a not-so great resume summary looks like, refer to our example below:
- Welder with several years of experience who has made a name for themselves for being a skilled welder. I am looking for a job at your company because I believe I would be a perfect fit for the position. I not only offer the qualities you’re after, but I also offer some additional ones that would be valuable in this role.
This resume summary might not look too bad to the untrained eye, but to a recruiter, it’s downright awful.
To put yourself in their shoes, take a closer look at it and ask yourself if you can tell:
- What type of welding the candidate does
- How long they have been working in the industry
- Why they would make a “perfect fit for the position”
- What qualities and skills they offer that the recruiter is apparently after
- What the additional qualities are that they purport to have
Your answer will surely be “No” for all of them because the candidate hasn’t provided any specific details about themselves or their professional experience or skills. So in short, they have made themselves out to be a fantastic pick for the position, without actually backing this up with any substantial evidence.
So what should you aim to do instead? Take a look at this shining example of a welder resume summary:
- Certified welder with 3+ years of experience who specializes in TIG welding. I believe I would be an ideal fit for the full time welding job at Complete Engineered Solutions due to my ability to work well under pressure as well as my ability to perform full penetration welds. I have also trained 20+ apprentices and would be eager to take more under my wing if I had the opportunity to work for your company.
This candidate’s attempt is extremely promising because they provide the recruiter with a meaningful overview not only of who they are, but also why they’re ideal for the job.
Take a look again at it and ask yourself if you can tell those same qualities we shared above. Are your answers any different? You should now have said “Yes” to all of them as this candidate effectively offered specific details about their professional experience and skills. They also backed up what they said with concrete examples.
Needless to say, this is a much more preferable approach to take with your resume summary if you want to convince recruiters to seriously consider your resume.
How to write a welder resume when you have little or no experience
Entry level welders can often feel intimidated when job hunting. Some may feel that it’s basically futile to apply at all given that you’re up against welders who have years of experience on you.
If this sounds like you, remember that the only way you’ll ever be hired is if you throw your hat into the ring. Follow our expert tips for entry level welders below to give yourself the best chance of getting hired soon:
- Apply for jobs that are actually suitable for your experience level: If you’re finding that the welding jobs you’re applying for are way out of your league, you’re likely applying for the wrong jobs. Fortunately, there are many job opportunities that specifically target entry level welders like yourself.
In order to find these jobs, look for job titles with “Trainee” or “Entry level” in them. You’ll quickly notice that the barrier to entry is much lower in these jobs and that you meet many if not all of the requirements.
- Feature any relevant courses you completed in high school: If you took a welding course during high school, be sure to showcase it prominently in your resume. A mathematics course that covers geometry will also be handy to highlight. Even a physical education course can show an employer you’re physically capable for a given job.
To feature any relevant courses you have, list them on a seperate line in your “Education” section. You can even highlight them in your resume objective if you wish.
- Include your apprenticeships: If you already have some apprenticeships to your name, you’re in luck. Apprenticeships are highly valued by recruiters as they demonstrate that you have received relevant training in a professional environment.
In order to include any in your resume, include them in your “Employment History” section. You can provide relevant details about your key responsibilities as well as achievements – just like you would when listing a regular job.
Pro tip: If you’ve undertaken an apprenticeship, why not ask your manager there to be one of your references? Be sure to give them a heads up before you begin your job search. If you’re lucky, they may be willing to give you some tips on your resume or recommend you to one of their contacts in the industry.
How to make your resume stand out
There’s no getting around the fact that welding jobs can be incredibly competitive. This is particularly true for jobs at well-known companies, in major cities, or those that command a high pay. If you want to strengthen your odds of getting called in for an interview, you’ll need to make your resume stand out. Here are our top tips for doing so:
- Avoid clichés and overused verbs: If your resume is bursting with overused or superficial statements and words, it’s time to rethink your approach. After all, the whole point of your resume isn’t to represent all welders throughout the country; it's to showcase your unique qualities as a welder.
The most straightforward way to do this is to customize your resume around the keywords from each job ad (as we’ve explored above) and to use power verbs. Power verbs are impactful verbs that can replace any overused verbs in your resume like “demonstrated” and “responsible for.” You can read more about using power verbs here.
- Select an appropriate headline: Using a headline in your resume is one of the easiest ways to differentiate it from the competition. According to Indeed, a headline is, “A short one-line phrase that highlights and summarizes your professional strengths and communicates what you can offer to an organization when you’re hired.”
We suggest taking a read of their article to learn how to craft a catchy headline recruiters love. Once you’ve perfected it, add it below your contact information section.
- Include an education section: While most welding jobs won’t require you to be college educated, many will still require you to have a high school diploma or equivalent. Even if a job doesn’t state certain educational requirements, it’s considered standard practice to include an “Education” section in your resume that at the very least features the highest level of education you have attained.
Be sure to list the name of the degree or diploma, the name of the school, college, or institution you received it, the state, and the years you studied for.
3. How to Make a World Class Resume Using Resumebuild.com’s Resume Builder Tool
It’s an unfortunate reality that putting together a strong resume by yourself is neither a fun nor quick task. It’s a very involved process that requires you to know exactly what to do as well as what to avoid.
If you manage to follow all of our expert tips above, you’ll have the insider knowledge needed to create a resume that’s significantly better than those of most other candidates. That being said, you’ll need plenty of time to do so; especially considering that you will need to follow our directions to a tee. One misstep and your chances of getting an interview may be as good as gone.
Fortunately, there is another way. In fact, it’ll help you create a resume that’s ten times better than what you could do yourself in only one tenth of the time. We’re of course talking about our streamlined resume builder at Resumebuild.com. Our resume builder was designed to provide job seekers like you with a more efficient and effective means of making a resume.
Instead of laboring for hours upon hours trying to get your resume’s format looking good and the words within it sounding just right, our resume builder will do most of the hard work for you. It offers you step-by-step guidance to completing each crucial section of your resume. it even comes pre-loaded with a variety of job-specific pre-written examples as well as a gallery of resume templates to choose from.
If you’re ready to stop applying aimlessly for jobs and start getting hired, start creating your welder resume today!
More Job Descriptions for welder Resumes
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
- Trim, file, grind, deburr, buff, or smooth surfaces, seams, or joints of assembled parts, using hand tools or portable power tools.
- Coordinate with other professionals, such as contractors, architects, engineers, and plumbers, to ensure job success.
- Sort materials, such as metals, glass, wood, paper or plastics, into appropriate containers for recycling.
- Pipe Welder (SMAW)
- Plate Welder (SMAW)
- Operate mobile equipment
- Signal person
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Operate safety equipment and use safe work habits.
- Fasten roof panel edges and machine-made molding to structures, nailing or welding pieces into place.
- Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, or downspouts in supportive frameworks.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Read blueprints and specifications to determine component parts and assembly sequences.
- Cut, trim, size various pieces of metal to meet specifications.
- TIG weld various metals together in different positions ranging from inconel to stainless steel at .020-.250.
- Inspect part , clean and polish.