Use This Template
Build your resume in 15 minutes
Give yourself the best chance of standing out from the
competition!
Create an awesome resume that meets the expectations of potential employers with our selection of professional, field-tested resume templates.
Create an awesome resume that meets the expectations of potential employers with our selection of professional, field-tested resume templates.
instrumentation technician: Resume Samples & Writing Guide
Employment history
Chief Instrumentation Technician, Boeing Seattle, Washington
June 2020 – Present
- Document maintenance and repair activities
- Troubleshoot and repair instrumentation systems
- Provide technical support and training to other technicians
Associate Instrumentation Technician, Raytheon Waltham, Massachusetts
December 2018 – May 2020
- Monitor instrumentation system performance and make necessary adjustments
- Develop and implement maintenance plans for instrumentation systems
- Perform preventive maintenance on instrumentation systems
Jr. Instrumentation Technician, Raytheon Waltham, Massachusetts
June 2018 – November 2018
- Develop and implement maintenance plans for instrumentation systems
- Maintain records of instrumentation system performance
- Monitor instrumentation systems for irregularities and take corrective action as needed
Education
University of California, Berkeley, California
Boiler Maintenance and Repair, April, 2018
Skills
Relationship Management.
Interpersonal
Stress Management
Quality Assurance
Hydraulics
Process Control
Electrical Troubleshooting
Safety Practices
Do you already have a resume? Use our PDF converter and edit your resume.
Employment history
Senior Instrumentation Technician, Boeing Seattle, Washington
September 2015 – Present
- Install, configure, and calibrate instrumentation systems
- Identify and replace defective components
- Perform preventive maintenance on instrumentation systems
Instrumentation Technician, Lockheed Martin Bethesda, Maryland
September 2014 – August 2015
- Read and interpret technical drawings, schematics, and diagrams
- Develop and implement maintenance plans for instrumentation systems
- Troubleshoot and repair instrumentation systems
Junior Instrumentation Technician, General Electric Schenectady, New York
September 2013 – August 2014
- Monitor instrumentation systems for irregularities and take corrective action as needed
- Perform preventive maintenance on instrumentation systems
- Liaise with vendors for maintenance and repair of instrumentation systems
Education
University of Wisconsin, Madison, Wisconsin
Bachelor of Mechanical Technology, July, 2013
Skills
Documentation
Customer Service
Communication
Technical
Electrical Troubleshooting
Process Control
Electrical Wiring
Hydraulics
Professional Summary
An experienced Instrumentation Technician with expertise in troubleshooting and repairing a variety of electrical, mechanical, and pneumatic systems. Committed to providing quality maintenance and repair services to ensure optimal performance and compliance with safety standards.
Employment history
Lead Instrumentation Technician, Lockheed Martin Bethesda, Maryland
April 2010 – Present
- Monitor instrumentation systems for irregularities and take corrective action as needed
- Document maintenance and repair activities
- Develop and implement maintenance plans for instrumentation systems
Instrumentation Technician, Boeing Seattle, Washington
April 2009 – March 2010
- Monitor instrumentation system performance and make necessary adjustments
- Identify and replace defective components
- Liaise with vendors for maintenance and repair of instrumentation systems
Junior Instrumentation Technician, General Electric Schenectady, New York
September 2008 – March 2009
- Perform preventive maintenance on instrumentation systems
- Ensure compliance with safety regulations and industry standards
- Develop and implement maintenance plans for instrumentation systems
Education
Georgia Institute of Technology, Atlanta, Georgia
Doctor of Welding Technology, August, 2008
Georgia Institute of Technology, Atlanta, Georgia
Bachelor of Mechanical Technology, August, 2004
Skills
Training
Customer Service
Visualization
Reliability
Electrical Systems
Programmable Logic Controllers
PLC Programming
Pneumatics
Professional Summary
Experienced Instrumentation Technician with a strong background in maintenance and repair. Skilled in troubleshooting, installation, and calibration of various instruments and systems.
Employment history
Chief Instrumentation Technician, Honeywell Morristown, New Jersey
February 2013 – Present
- Liaise with vendors for maintenance and repair of instrumentation systems
- Develop and implement maintenance plans for instrumentation systems
- Troubleshoot and repair instrumentation systems
Associate Instrumentation Technician, Emerson Electric St. Louis, Missouri
February 2012 – January 2013
- Identify and replace defective components
- Monitor instrumentation systems for irregularities and take corrective action as needed
- Troubleshoot and repair instrumentation systems
Jr. Instrumentation Technician, Emerson Electric St. Louis, Missouri
February 2011 – January 2012
- Ensure compliance with safety regulations and industry standards
- Identify and replace defective components
- Document maintenance and repair activities
Education
University of Illinois, Champaign, Illinois
Doctor of Building Technology, December, 2010
University of Illinois, Champaign, Illinois
Bachelor of Industrial Technology, December, 2006
Skills
Data Analysis
Negotiation
Attention to Detail
Problem Solving
Electrical Wiring
Control Systems
HVAC
PLC Programming
Professional Summary
Instrumentation Technician with extensive experience in maintenance and repair of instrumentation systems. Skilled in troubleshooting and diagnosing complex instrumentation issues.
Employment history
Chief Instrumentation Technician, Raytheon Waltham, Massachusetts
December 2011 – Present
- Read and interpret technical drawings, schematics, and diagrams
- Monitor instrumentation system performance and make necessary adjustments
- Develop and implement maintenance plans for instrumentation systems
Associate Instrumentation Technician, United Technologies Farmington, Connecticut
June 2010 – November 2011
- Perform tests and inspections of instrumentation systems
- Monitor instrumentation system performance and make necessary adjustments
- Maintain records of instrumentation system performance
Jr. Instrumentation Technician, Boeing Seattle, Washington
January 2009 – May 2010
- Prepare reports of instrumentation system performance
- Liaise with vendors for maintenance and repair of instrumentation systems
- Ensure compliance with safety regulations and industry standards
Education
Texas A&M University, College Station, Texas
Bachelor of Electrical Technology, November, 2008
Skills
Database Management
Professionalism
Conflict Resolution
Listening
Process Automation
Hydraulics
Process Control
Pneumatics
Not in love with this template? Browse our full library of resume templates
instrumentation technician Job Descriptions; Explained
If you're applying for an instrumentation technician position, it's important to tailor your resume to the specific job requirements in order to differentiate yourself from other candidates. Including accurate and relevant information that directly aligns with the job description can greatly increase your chances of securing an interview with potential employers.
When crafting your resume, be sure to use action verbs and a clear, concise format to highlight your relevant skills and experience. Remember, the job description is your first opportunity to make an impression on recruiters, so pay close attention to the details and make sure you're presenting yourself in the best possible light.
11
instrumentation technician
- Experience in Calibration and maintenance of Pressure Gauges, Temperature Gauges, Level Switches, Pressure Switches, and Temperature Switches.
- Preventive maintenance of Control valve, Pressure gauge, Temperature gauge, Thermocouple, RTD, Transmitter, Pressure switches
- Calibrating Transmitters (Pressure transmitter, Level transmitter, Flow transmitter, Temperature transmitter) and servicing all these transmitter
- Installation, Commissioning, Maintenance and Calibration of Analytical instruments like pH, Conductivity, ORP. Muffle furnace and Flow meters ( Magnetic flow meters of Khrone Marshall, Rosemount and E&H Ultrasonic )
- Calibration and maintenance of Level Switches, Pressure Switches, Temperature Switches, Sensors (Electro magnetic sensor, Chlorine sensor, Level sensor) and Pneumatic Actuators.
- Maintenance and servicing SOV, cylinders, pressure switch, NRV and conductivity meter
- Loop checking, forcing the parameters and checking the status of isolators and converter. Control panel wiring and dressing.
12
instrumentation technician
- Maintain and update awareness of modifications to regulatory needs related to conduct of maintenance and construction of instrument.
- Comply with classification and prioritization system for completion of work order.
- Assist planning plus operations staff to identify skills and resource needed to complete planning and reactive work activities.
- Comply with every approved operation and maintenance procedures.
13
instrumentation technician
- Design, implement, maintain, or improve electrical instruments, equipment, facilities, components, products, or systems for industrial purposes.
- Perform with maintenance planners as schedule work load.
- Comply with all instructions for job tasks completion.
- Installing and check the working of variable difference flow meter, Rotameter.
14
instrumentation technician
- Glanding the cable and checking the continuity of the cable.
- Installing new Transmitter and gauges where parameter variable is required.
- Ensure Spares balance and inventory control for all instruments spare parts.
- Control and monitoring the on line valves using Supervisory control and data acquisition (SCADA) system.
15
instrumentation technician
- Pre-Commissioning and Commissioning of the instrumentation installation on site.
- Review of P&ID s and Familiarized in symbols and standards of Instrumentation.
instrumentation technician Job Skills
For an instrumentation technician position, your job skills are a key factor in demonstrating your value to the company and showing recruiters that you're the ight fit for the role. It's important to be specific when highlighting your skills and ensure that they are directly aligned with the job requirements, as this can greatly improve your chances of being hired. By showcasing your relevant skills and experience, you can make a compelling case for why you're the best candidate for the job.
How to include technical skills in your resume:
Technical skills are a set of specialized abilities and knowledge required to perform a particular job
effectively. Some examples of technical skills are data analysis, project management, software proficiency,
and programming languages, to name a few.
Add the technical skills that will get hired in your career
field with our simple-to-use resume builder. Select your desired resume template, once you reach the skills
section of the builder, manually write in the skill or simply click on "Add more skills". This will
automatically generate the best skills for your career field, choose your skill level, and hit "Save &
Next."
- PLC Programming
- Electrical Troubleshooting
- Instrument Calibration
- Mechanical Maintenance
- Process Control
- Troubleshooting
- Pneumatics
- Hydraulics
- Electrical Wiring
- Automation
- Data Acquisition
- Programmable Logic Controllers
- Process Automation
- Industrial Maintenance
- Control Systems
- Electronics
- Electrical Systems
- HVAC
- Welding
- Safety Practices
How to include soft skills in your resume:
Soft skills are non-technical skills that relate to how you work and that can be used in any job. Including
soft skills such as time management, creative thinking, teamwork, and conflict resolution demonstrate your
problem-solving abilities and show that you navigate challenges and changes in the workplace
efficiently.
Add competitive soft skills to make your resume stand-out to recruiters! Simply select
your preferred resume template in the skills section, enter the skills manually or use the "Add more skills"
option. Our resume builder will generate the most relevant soft skills for your career path. Choose your
proficiency level for each skill, and then click "Save & Next" to proceed to the next section.
- Communication
- Interpersonal
- Leadership
- Time Management
- Problem Solving
- Decision Making
- Critical Thinking
- Creativity
- Adaptability
- Teamwork
- Organization
- Planning
- Public Speaking
- Negotiation
- Conflict Resolution
- Research
- Analytical
- Attention to Detail
- Self-Motivation
- Stress Management
- Collaboration
- Coaching
- Mentoring
- Listening
- Networking
- Strategic Thinking
- Negotiation
- Emotional Intelligence
- Adaptability
- Flexibility
- Reliability
- Professionalism
- Computer Literacy
- Technical
- Data Analysis
- Project Management
- Customer Service
- Presentation
- Written Communication
- Social Media
- Troubleshooting
- Quality Assurance
- Collaboration
- Supervisory
- Risk Management
- Database Management
- Training
- Innovation
- Documentation
- Accounting
- Financial Management
- Visualization
- Reporting
- Business Acumen
- Process Improvement
- Documentation
- Relationship Management.
How to Improve Your instrumentation technician Resume
Navigating resume pitfalls can mean the difference between landing an interview or not. Missing job descriptions or unexplained work history gaps can cause recruiters to hesitate. Let's not even talk about the impact of bad grammar, and forgetting your contact info could leave your potential employer hanging. Aim to be comprehensive, concise, and accurate.
Simon Nelson 347 Cedarwood Avenue, Brownsville, OR 97327
Employment history
Jr. Instrumentation Technician, Lockheed Martin Bethesda, Maryland
March 2022 – December 2022
- Troubleshoot and repair instrumentation systems
- Liaise with vendors for maintenance and repair of instrumentation systems
- Prepare reports of instrumentation system performance
Education
University of Illinois, Champaign, Illinois
Bachelor of Industrial Technology, January, 2022
Skills
Documentation
Reliability
Communication
Time Management
Mechanical Maintenance
HVAC
Troubleshooting
Electrical Wiring
Provide your Contact Information and Address Year Gaps
Always explain any gaps in your work history to your advantage.
Key Insights- Employers want to know what you've accomplished, so make sure to explain any gaps using a professional summary.
- Adding extra details and context to explain why you have a gap in your work history shows employers you are a good fit for the position.
How to Optimize Your instrumentation technician Resume
Keep an eye out for these resume traps. Neglecting to detail your job roles or explain gaps in your career can lead to unnecessary doubts. Grammar blunders can reflect negatively on you, and without contact information, how can employers reach you? Be meticulous and complete.
Employment history
Senior Instrumentation Technician, Honeywell Morristown, New Jersey
November 2017 – Present
- Ensure complience with saftey regulations and industry standards
- Monitor instrumentation system performance and make neccesary adjustments
- Prepare reports of instrumentation system performence
Associate Instrumentation Technician, Lockheed Martin Bethesda, Maryland
May 2017 – November 2017
- Moniter instrumentation system performance, and make neccessary adjustmants
- Perform tests, and inspecions of instrumentation systems
- Ensure complience with saftey regulations, and industry standards.
Jr. Instrumentation Technician, Siemens Alpharetta, Georgia
May 2016 – April 2017
- "I went to the store to buy some groceries
- I went to the store too buy some groceries.
Education
Texas A&M University, College Station, Texas
Master of Industrial Technology, March, 2016
Texas A&M University, College Station, Texas
Bachelor of HVAC Technology, March, 2012
Skills
Financial Management
Visualization
Attention to Detail
Negotiation
Electrical Troubleshooting
Troubleshooting
Welding
Process Control
Include Job Descriptions and Avoid Bad Grammar
Avoid sending a wrong first impression by proofreading your resume.
Key Insights- Spelling and typos are the most common mistakes recruiters see in resumes and by simply avoiding them you can move ahead on the hiring process.
- Before submitting your resume, double check to avoid typos.
instrumentation technician Cover Letter Example
A cover letter can be a valuable addition to your job application when applying for an instrumentation technician position. Cover letters provide a concise summary of your qualifications, skills, and experience, also it also gives you an opportunity to explain why you're the best fit for the job. Crafting a cover letter that showcases your relevant experience and enthusiasm for the Accounts Payable role can significantly improve your chances of securing an interview.
Chief Instrumentation Technician
Raytheon
Waltham, Massachusetts
Raytheon
Waltham, Massachusetts
Raytheon Recruitment Team
I am excited to apply for the Chief Instrumentation Technician position at Raytheon. As a highly skilled Instrumentation Technician with 5 years of experience in Maintenance & Repair, I am confident that I can contribute significantly to your organization.
As someone who has always been committed to making a positive impact on the world, I have pursued opportunities to contribute to my community through my work wherever I may be. My experience in this field has equipped me with the skills and knowledge necessary to succeed throughout my life and I am confident that they will help me to bring my passion and expertise to your organization and help drive your success.
Thank you for considering my application for the Chief Instrumentation Technician role. I am looking forward to a future where we work together to drive this organization's success.
Thank you for your time and consideration,
Brad Griffin
713-309-5944
[email protected]
Brad Griffin
Showcase your most significant accomplishments and qualifications with this cover
letter.
Personalize this cover letter in just few minutes with our user-friendly tool!
Related Resumes & Cover Letters
FIND EVERYTHING YOU NEED HERE.
IF YOU HAVE QUESTIONS, WE HAVE ANSWERS.
4 Ways a Career Test Can Jump-Start Your Future (and Help Your Resume)
If you’re looking for a fresh path or a new passion, a career test could help you find it. You can take these tests online, in the comfort of your...
Avoid These 3 Resume Mistakes at All Costs
Your resume is your first impression for a prospective employer. The way you present yourself in that little document can make or break you – it can clinch you an...
Resume Design Tips and Tricks
Creating a resume that stands out from the rest doesn’t have to be rocket science. With just a few tips and tricks, you can make your professional resume a shining...
Build your Resume in 15 minutes
Give yourself the best chance of standing out from the
competition!
Create an awesome resume that meets the expectations of potential employers with our selection of professional, field-tested resume templates.
Create an awesome resume that meets the expectations of potential employers with our selection of professional, field-tested resume templates.