Use This TemplateAndrew Smith
Phone:
(000) 000-0000
Email:
[email protected]
Address:
287 Custer Street, Hopewell, PA 00000
Professional Summary
-Strong experience in engineering, worked for almost 10 years as a process engineer in paint shop, and more than 8 years in product development area.
- Expertise in solving problems related to automotive paints application and continuous improvement in painting process.
- Experience in the use of quality / six sigma tools in process improvement.
- Coordination of group of technicians and operators in paint supply activities.
- Active participation in the development of global automotive products in corrosion protection area.
- Experience in monitoring prototype tests and approval of paint applications over metal substrates for vehicle componentes.
Employment history
Jun. 2012 – May. 2016
Raquelburgh, Louisiana
Senior Product Engineer, Pollich-O'Kon
- Corrosion attribute engineer in the materials team of the Ford Product Development Center.
- Support in the development of the corrosion protection strategy and monitoring of vehicle prototype tests for Ford new products.
-Testing and approval of paint applications on metal for components of Ford vehicles.
-Interface with Ford Quality, Paint and Service teams in the evaluation and solution of corrosion field problems.
Aug. 2007 – Oct. 2008
Abernathyborough, Kansas
Senior Process Engineer, Wunsch and Sons
-Technical assistance in the solution of problems related to the application of automotive paints in Ford paint line.
-Implementation of Six Sigma projects for quality improvement and cost reduction.
-Supervision of chemical and physical tests for automotive coatings.
-Coordination of a group of technicians and operators in paint supply activities.
Sep. 1998 – Jan. 1999
Darrenhaven, New Hampshire
Customer Service Technician, Von and Sons
-Technical and commercial support for the implementation of gas applications in customers of chemical and petrochemical segments at Camaçari Petrochemical Complex and Aratu Industrial area.
Nov. 1997 – Apr. 1998
Mathewmouth, Vermont
Chemical Engineering Intern, Reynolds, Renner and Jenkins
Support in implementation of atmospheric gas technologies.
Education
Nov. 2011
MBA: Project Management
- The New Jersey Institute - Ricestad, South Dakota
May. 1998
Bachelor of Science: Chemical Engineering
- North Dare University - Nickolefurt, West Virginia
Skills
Product Development
Experienced
Six Sigma- Green Belt
Experienced
Corrosion Protection
Experienced
Automotive Paints and Coatings
Experienced
Product Engineering
Experienced
Process Engineering
Experienced
Professional Summary
Tenured Mechanical Design Engineer with 10+ years of experience. Strong understanding of manufacturing processes including stamping, welding, machining, and tubing. In-depth knowledge of tolerancing standards, geometric dimensioning, and aerospace component engineering. Capable professional with a keen eye for detail, exceptional multi-tasking capabilities, and advanced technical knowledge seeking role as a senior-level engineer.
Employment history
Product Engineer, Bruen, Prosacco and Kunze. Ratkeborough, Louisiana
Mar. 2017 – Present
- Complete seat packaging and feasibility study as per Legal/OEM requirements.
- Complete seat layout/check sheets preparation and review with SMTE.
- Complete seat drawings, exploded view drawings, Part and assembly drawing with
- GD&T, maintain excel BOM and update for timely changes.
- Prepare Tactical Plans for deliverable requisite for Gate closure and Release activity in PLM.
- Simulate and check packaging using kinematics.
- Knowledge about design sign off, requirement sign off, safety sign off, target data matrix for complete seating program.
- Knowledge about seating regulatory tests, DFMEA and engineering deliverables during each gate.
- Co-ordination with counter parts for deliverables.
Design Engineer, Becker, Gaylord and Mante. Merrillstad, New Mexico
Jul. 2014 – Jan. 2016
Responsibilities:
- Co-ordinate with supplier for design and development activities.
- Secure seats and related parts for prototype, testing and implementation on line.
- Co-ordinate with cross functional teams for design review and approvals.
Project Description:
- Implementation wiper and washer mechanism on all coach buses from new supplier.
- New concept design for grab rails and partition wall of city bus
- Design and development of new tool box for coaches
- Release of toughened glasses for coach buses.
- Side panel releases with FRP material for coaches.
- Roof modification for LED lights implementation for coaches.
- Hatch door design modification for new locks.
- Seat parts documentation for aftermarket serviceability.
- Development of passenger seats, priority seats and driver seat for European market bus.
- Front wall change to tubular structure for cost reduction.
- Hatches design with new budget lock for coaches
(Deputed at Volvo India Pvt Ltd- Trucks Division –July 2012-Dec 2014)
Project Description and responsibilities:
- Provide the concepts for steering system in the heavy duty and medium duty trucks.
- Ensure to fulfill all requirement from stake holder like manufacturing requirement, After market requirement of maintainability etc.
- Identify the critical issues for the area regarding routing & resolving it in agreement of all stake holder.
- Highlight issues of other commodities and suggest modifications without affecting functionality
- Ensure the deliveries of steering area before each gate.
- Create part numbers for single parts assemblies, cad modules, part structure for BOM in Kola, Technical documents at PDM-Link with Pro E/Creo Elements and in other PDM systems
- Resolve design issues in manufacturing lines eg: steering lines, mounting brackets.
- Preparation of Installation drawings, Part, Assembly & Layout Drawings.
- Co-ordinate with cross functional teams for design review and approvals
- Co-ordinate with suppliers for design review(RTS) before supplier selection for product
- Creating V-spec of parts to link parts to particular variant in PDM.
- Part design like bracket design for frame attachments of trucks
- Design of routing cross members for servo pipes.
- Design proposal with DMU packaging study of Pipe & Hose routing of Steering System & Supporting brackets for holding Steering pipes.
Design Engineer, Ankunding LLC. Port Sofia, Alaska
Oct. 2011 – Dec. 2011
Projects Done at ERC:
- Sheet metal engine guard for Vista variants which significantly reduced water ingress, reduced stone hitting on oil sump and transaxle boot.
- Design of alternator cover for SDE vehicle to protect against water ingress.
- Packaging and routing of power steering hoses for Vista CR4-TA 65,70Ps140Nm, Vista TA 78 & 1.2L Xeta TML Turbo vehicles.
- TPL updation & release of big ball bearing pump in Vista TCIC to address failure of PAS pump.
- Release of TPLs for commonise of oil reservoirs in ABS and Non ABS versions under integrated cost reduction activity.
- Designed ECU mounting brackets for Euro V SDE Vista,Vista CR4 & 1.2 TML Turbo.
- Checking drawings received from supplier against TML offer drawings for steering gears, pumps and hoses
- Modification in design after part validation on vehicle to meet intended requirements.
- Sign off prototype vehicles for validation of steering system
- Implementation of complexities for steering components for vehicles.
Design Engineer, Steuber Group. North Heathside, California
Mar. 2010 – Jun. 2010
Projects Done at Sanmin Technologies.
- Worked on BIW fixtures projects for Larsen and Toubro, Comau India
- Casting project -design of bell housing of gear box.
- Machining fixture for crank lever for TAL, Kirloskar Pneumatic Company
- 3D modelling of reciprocating air compressor for Kirloskar Pneumatic Company.
Design Engineer, Johnson LLC. Tuyetmouth, Massachusetts
Dec. 2007 – Oct. 2008
Projects worked on at Finearc Systems.
- Welding fixture for drain plug, side cover to differential casing-for two wheeler
- Fixtures for four wheeler exhaust system
- Welding fixture for diesel tank and hydraulic tank for JCBs.
- Welding and inspection fixture for clutch cable heat shield assembly
- Robotic welding fixture, Inspection fixture for Car Cross Beam LHD assembly for Nissan micra.
Education
North Jerde University, West Salleymouth, Missouri
Bachelor of Engineering with 60% marks, Mechanical, Feb. 2006
Northern Becker, East Sammy, New York
Pre University College with 67.34% marks, Science, Mar. 2002
The Ritchie, West Katharinemouth, Wyoming
SSLC with 70.40%, SSLC, Jul. 2000
Skills
People management
Skillful
CAD softwares- CATIA-V5, CREO.
Experienced
Product lifecycle management-Teamcenter PLM
Experienced
MS Office
Experienced
Product Design-Steering systems, Seating systems,Chassis components
Experienced
Andrew Smith
Phone:
(000) 000-0000
Email:
[email protected]
Address:
287 Custer Street, Hopewell, PA 00000
Professional Summary
Recent graduate equipped with a Bachelor of Engineering in Chemical Engineering and currently pursuing a Master of Engineering in Chemical Engineering with a specialisation in Reactor Design, eager to join a reputable organization to begin a fulfilling, lifelong career.Extensive knowledge of process design and process optimisation. Additional knowledge and experience of Project costing, Project scheduling, HAZIDS, HAZOPS and Risk Analysis.
Employment history
Sep. 2015 – Oct. 2015
East Romeoshire, New Jersey
Product Engineer, McKenzie-White
- Provide advisory information on what category and concentration of chemicals are required for substrate coating.
- Optimising the process to get the maximum attainable output of parts coated per hour.
- Assist with designing and commissioning of hexavalent chrome coating (on ABS substrate) plant.
- Carry out costing analysis for plant erection and commissioning.
- Develop process HAZOP and risk analysis reports.
- Perform laboratory tests and monitor the performance of various stages of chrome coating to determine optimum bath concentration and temperature to achieve maximum attainable output.
Jul. 2014 – Sep. 2014
Port Adan, Indiana
Assistant Engineer, Larson, Brekke and Daugherty
- Assist the design team for the revamping of cellulose-based reverse osmosis water to obtain a recovery of 77.8% and rejection of 97.8%, in order to produce De-ionized water of required salt concentration.
- Perform water quality checks on the coating baths.
- Troubleshoot problems related to the bath quality parameters.
Mar. 2013 – May. 2013
Port Lashon, New Jersey
Technical Intern, Homenick-Lubowitz
- Carry out efficiency check on the shell and tube heat exchangers, reactors and centrifugal pumps in the diesel hydrodesulphurisation unit.
- Assist the DHDS team in developing maintenance and shutdown planning.
- Assist the DHDS team in preparing a baseline plan and critical path for shut down, maintenance and revamp.
May. 2012 – Jun. 2012
Port Bessbury, Minnesota
Intern, Haag-Haley
- Carry out material and energy balance of the overall plant.
- Assist the shutdown team with HAZOP and risk analysis.
Education
Present
Master of Engineering: Chemical Engineering
- Hansen Academy - East Jame, New Mexico
Nov. 2015
Bachelor of Engineering: Chemical Engineering
- North Montana University - Reingerside, Louisiana
Skills
Auto CAD
Skillful
Microsoft Project
Skillful
COMSOL Multiphysics
Skillful
Aspen HYSYS
Experienced
Microsoft Office
Experienced
C++
Beginner
Not in love with this template? Browse our full library of resume templates
Build your resume in 15 minutes
Use professional field-tested resume
templates that follow the exact resume rules employers look for.
Related Resumes & Cover Letters
More Job Descriptions for product engineer Resumes
1
product engineer
- Worked on social media management software, involved in front-end development.
- Utilized JavaScript, jQuery, Backbone, Ajax, HTML5.
- Led and Built 3 Customer Relationship Management Systems (CRM) end-to-end, deployed to 400+ service partners.
- Built Order Management, Invoice Management, Fleet Management, worked with 50+ clients across India. Worked on 20+ Projects.
2
product engineer
- Handle the tasks of providing technical support on Wireless presentation products to customers via chat and email
- Perform responsibilities of analyzing and solving problems of minimal to moderate complexity under the instructions of team leads and management
- Install, configure and modify hardware and software to ensure optimal performance; monitor, log, and track all phases of customer support
- Work remotely with end users to resolve issues and provide required support via TeamViewer or WebEx sessions
- Stay Current on Technical Specifications, Hardware Requirements and Software Revisions to ensure Compatibility
- Administer, Manage and resolve customer support issues through Zendesk ticketing system
3
senior product engineer
- As integral member of Media team responsible for quickly resolving highly technical, complex issues related to Media streaming.
- Resolving Live Media Streaming issues, encoding video content etc.
- Monitoring End-2-End delivery of content, troubleshooting customer issues real time etc.
- Involved in all technical aspects of Akamai’s products and services and in maintaining customer relationships.
- Involved in events preparations on the customer side, few notable events like NFL, Olympics, IPL, Masters etc. Prime role was to get the customer the desired products and streaming workflows set.
- Help Different Tier’s in implementing customer workflow and network Architecture Designing.
4
product engineer
- Inspect products to ensure that specifications are met and to determine whether machines require adjustment.
- Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
- Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
- Sew ends of cloth together, by hand or using machines, to form endless lengths of cloth to facilitate processing.
- Place bobbins on spindles and insert spindles into bobbin-winding machines.
- Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
5
product engineer (line support)
- Daily activities include line support through engineering lots monitoring, data gathering, material handling and planning & execution based on prioritization of projects
- Ensure quality lot processing through the application of special work instructions specified by the project owner
- Perform necessary preventive and corrective actions during lot processing
- Coordinate lot status with project owners (movement from station to station, potential problems concerning quality and yield) and with production supervisors and personnel (machine and manpower allocation, lot prioritization, material handling, and safekeeping)
Suggested Reading:
Related Articles
4 Ways a Career Test Can Jump-Start Your Future (and Help Your Resume)
If you’re looking for a fresh path or a new passion, a career test could help you find it. You can take these tests online, in the comfort of your...
Avoid These 3 Resume Mistakes at All Costs
Your resume is your first impression for a prospective employer. The way you present yourself in that little document can make or break you – it can clinch you an...
Resume Design Tips and Tricks
Creating a resume that stands out from the rest doesn’t have to be rocket science. With just a few tips and tricks, you can make your professional resume a shining...