Qc Inspector Resume Examples

qc inspector

  • Performed Visual Inspection of welds and materials
  • Inspected fabrication on structural and pipe
  •  Witnesses and sign off on hydrostatic testing of piping
  • Inspection and flagging of welds for NDE 
  • Coordinated NDE 
  • Recorded details on observations and submitted to the authority
  • Maintained all document updated

qc inspector

  • Package runner for QC department. 
  • Built mechanical packages for chlorine unit. 
  • Visually inspected bolt-ups throughout unit for proper gasket, flange alignment, and proper hardware. 
  • Checked bolts for tightness using a ping hammer. 
  • Interpreted packet specifications to assure torquing procedure was done correctly. 
  • Witnessed torquing procedure on all required flanges. 
  • Filed paperwork through third part inspectors.

qc inspector / welder

  • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
  • Responsible for the in process Technical Inspection regarding Quality Aspects & ensure the conformity of the Products.
  • Provide suggestions in implementing and setting Quality Standards. Dealing with man power regarding Quality Standards of Products. Controlling unnecessary Wastage of Material.
  • Responsible for taking all the data of the products.

qc inspector

  • Dimensional Inspection of Internal Trays and Ring Levelness, down comers.
  • Inspection of Pre-assembly, Alignment and installation static & rotating equipment. Installation of trays in towers and drums, valve tray, alignment and installation of pumps, Preservation of Static and Rotary Equipment’s.
  • Inspection and Responsible to run the material preservation program at job site for all type of equipment’s during storage, Construction and Commissioning stages.
  • Receive the RFI from the discipline staff and carry out the inspection as per ITP, Identify any discrepancies and generate the Non-conformance report (NCR).Raising and closing NCR, CAR and PAR (Preventive Action Request) in conjunction with QC Team.
  •  Prepare QC documents for MCD (Mechanical Completion document) for review by the QC Coordinator, which is finally handed over to the client.
  • Check and carry out inspection site welding activities.

qc inspector

  • inspect the quality of drip tape to enure the customers are receiving  quality product
  • teach the operators what defects they should be looking for
  • communicate between each department
  • Ukur dimensi produk untuk mengesahkan kesesuaian dengan spesifikasi, menggunakan ukur alat seperti penguasa, calipers, tolok, atau mikrometer. Semak bahan-bahan yang akan tiba untuk memastikan mereka memenuhi pesanan pembelian, mengemukakan laporan percanggahan yang diperlukan.

qc inspector ( onshore erection and installation )

  • Performed piping fit-up and visual inspection.
  • Prepared necessary documents and quality inspection reports such as punch list.
  • Coordinate with construction testing team and QC department in the preparation of testing activity based on test pack.
  • Performed inspection for pressure testing.

qc inspector

  • Inspect, test, or measure materials or products being produced.
  • Read blueprints and specifications
  • Monitor operations to ensure that they meet production standards 
  •  Accept or reject finished items

qc inspector ( onshore erection and installation )

  • Assisted Test Package Engineer in reviewing test packs before releasing test pack with a relevant document for site testing.
  • Performed inspection for pressure testing (hydro-test, pneumatic test, and service test).
  • Monitored reinstatement work done by sub-contractors.
  • Monitored and supervised contractors and sub-contractors on insulation activities.
  • Prepared relevant report on daily inspection activities

qc inspector

  • Created drawings, built weld packages and submitted completed packages to the client.
  • Utilized visual inspection techniques as well as performing detailed measurements with handheld tools and devices.
  • Established relationships with the client, contractors, and projects team.
  • Inspected welds visually and by using the liquid penetration method.
  • Inspected Flange Connections and bolt torque. 
  • Walked down jobs and created punch list for items not complete.
  • Organized NDE to be done by submitting request and verifying location with NDE inspectors.

qc inspector

  •  Make sure that all works going save according to HSE Advisor.
  •  Checking the pipe and electrodes before starting weld.
  •  Checking the joint alignment and pipe dimension.
  •  Carry out visual inspection of the welded joint (Including dimensional aspect).
  •  Identify repairs from assessment of visual or NDT reports.
  •  Preparation Daily Fit-up, Weld Visual Reports and Inspection Checklists.
  •  Inspection of Painting, Sandblasting, and coating.