boy

Build your resume in 15 minutes

Give yourself the best chance of standing out from the competition!

Create an awesome resume that meets the expectations of potential employers with our selection of professional, field-tested resume templates.
START YOUR RESUME NOW

collision repair technician: Resume Samples & Writing Guide

Steve Evans 625 Country Lane, Sully Square, VA 20171
[email protected]
967-324-2824

Professional Summary

 A highly experienced Collision Repair Technician with expertise in diagnosing and repairing vehicle damage. Committed to providing excellent customer service and ensuring safe and efficient repairs. 

Employment history

Chief Collision Repair Technician, General Electric Schenectady, New York
October 2009 – Present
  • Hammer out dents, buckles, and other defects using blocks and hammers
  • Inspect damaged vehicles to determine the extent of structural, body, mechanical, and electrical damage
  • Mix paint, blend and match colors, and spray surfaces with protective finishes or coatings
Collision Repair Technician, Northrop Grumman Falls Church, Virginia
March 2009 – September 2009
  • Hammer out dents, buckles, and other defects using blocks and hammers
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools
  • Inspect damaged vehicles to determine the extent of structural, body, mechanical, and electrical damage
Junior Collision Repair Technician, Boeing Seattle, Washington
October 2007 – February 2009
  • Weld replacement parts in position, using electric and gas welders and soldering tools
  • Perform repairs to vehicles following established standards and procedures
  • Install and repair accessories, such as radios, heaters, mirrors, and windshield wipers

Education

Purdue University, West Lafayette, Indiana
Bachelor of Boiler Technology, August, 2007

Skills

Collaboration
Flexibility
Adaptability
Negotiation
Automotive Electrical Systems
Heating and Air Conditioning
Automotive Diagnostics
Automotive Parts Replacement.

Do you already have a resume? Use our PDF converter and edit your resume.

Build My Resume
Nathan Kelly 666 Laurel St., Grano, ND 58750
[email protected]
783-335-8868

Professional Summary

 Highly experienced Collision Repair Technician with extensive knowledge in the maintenance and repair of vehicles. Proven ability to diagnose and repair a wide range of automotive issues. 

Employment history

Senior Collision Repair Technician, General Electric Schenectady, New York
January 2012 – Present
  • Repair and replace interior components, such as door panels, upholstery, and air bags
  • Weld replacement parts in position, using electric and gas welders and soldering tools
  • Mix paint, blend and match colors, and spray surfaces with protective finishes or coatings
Associate Collision Repair Technician, Siemens Alpharetta, Georgia
June 2011 – December 2011
  • Remove upholstery, accessories, electrical and hydraulic window-and-seat-operating equipment, and trim to gain access to vehicle and/or repair area
  • Align vehicle frames, using jacks, turn plates, and measuring instruments
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools
Junior Collision Repair Technician, Emerson Electric St. Louis, Missouri
January 2010 – May 2011
  • Repair and replace interior components, such as door panels, upholstery, and air bags
  • Align vehicle frames, using jacks, turn plates, and measuring instruments
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools

Education

University of Wisconsin, Madison, Wisconsin
Doctor of Mechanical Technology, November, 2009
University of Wisconsin, Madison, Wisconsin
Bachelor of Automotive Technology, November, 2005

Skills

Innovation
Negotiation
Time Management
Risk Management
Automotive Mechanical Systems
Automotive Diagnostics
Automotive Electronics
Suspension and Steering
Build My Resume
Earl Ingram 492 Meadowview Drive, Elliott, MD 21869
[email protected]
669-214-2032

Employment history

Chief Collision Repair Technician, Boeing Seattle, Washington
May 2022 – Present
  • Inspect damaged vehicles to determine the extent of structural, body, mechanical, and electrical damage
  • Test-drive vehicles to ensure that repairs and adjustments have been properly made
  • Mix paint, blend and match colors, and spray surfaces with protective finishes or coatings
Associate Collision Repair Technician, Boeing Seattle, Washington
November 2021 – April 2022
  • Perform repairs to vehicles following established standards and procedures
  • Replace and adjust headlights, taillights, and other exterior lighting
  • Align vehicle frames, using jacks, turn plates, and measuring instruments
Junior Collision Repair Technician, General Electric Schenectady, New York
May 2020 – October 2021
  • Grind and sand repaired surfaces, using power tools and hand tools
  • Replace and repair bumpers, fenders, door panels, and other body parts
  • Remove upholstery, accessories, electrical and hydraulic window-and-seat-operating equipment, and trim to gain access to vehicle and/or repair area

Education

Arizona State University, Tempe, Arizona
Doctor of Industrial Technology, March, 2020
Arizona State University, Tempe, Arizona
Bachelor of Building Technology, March, 2016

Skills

Professionalism
Training
Networking
Organization
Diagnostics
Suspension and Steering
Brake Systems
Automotive Maintenance
Build My Resume
Rob King 468 Mill Road, Medford, NY 11763
[email protected]
932-722-8523

Employment history

Lead Collision Repair Technician, Raytheon Waltham, Massachusetts
June 2015 – Present
  • Inspect damaged vehicles to determine the extent of structural, body, mechanical, and electrical damage
  • Replace and repair bumpers, fenders, door panels, and other body parts
  • Repair and replace interior components, such as door panels, upholstery, and air bags
Collision Repair Technician, United Technologies Farmington, Connecticut
November 2014 – May 2015
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools
  • Weld replacement parts in position, using electric and gas welders and soldering tools
  • Mix paint, blend and match colors, and spray surfaces with protective finishes or coatings
Junior Collision Repair Technician, ABB Cary, North Carolina
June 2013 – November 2014
  • Replace and repair bumpers, fenders, door panels, and other body parts
  • Weld replacement parts in position, using electric and gas welders and soldering tools
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools

Education

University of Michigan, Ann Arbor, Michigan
Mechanical Maintenance and Repair, April, 2013

Skills

Collaboration
Collaboration
Leadership
Risk Management
Automotive Bodywork
Sheet Metal Fabrication
Exhaust Systems
Automotive Electronics
Build My Resume
Bernie Watson 168 Pleasant Valley Drive, Mount Joy, PA 17552
[email protected]
780-025-7178

Employment history

Lead Collision Repair Technician, Emerson Electric St. Louis, Missouri
June 2020 – Present
  • Replace and repair bumpers, fenders, door panels, and other body parts
  • Hammer out dents, buckles, and other defects using blocks and hammers
  • Inspect damaged vehicles to determine the extent of structural, body, mechanical, and electrical damage
Associate Collision Repair Technician, General Electric Schenectady, New York
January 2019 – May 2020
  • Replace and adjust headlights, taillights, and other exterior lighting
  • Test-drive vehicles to ensure that repairs and adjustments have been properly made
  • Repair and replace interior components, such as door panels, upholstery, and air bags
Entry Level Collision Repair Technician, General Electric Schenectady, New York
January 2018 – December 2018
  • Repair and replace interior components, such as door panels, upholstery, and air bags
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools
  • Grind and sand repaired surfaces, using power tools and hand tools

Education

Purdue University, West Lafayette, Indiana
Master of Mechanical Technology, November, 2017
Purdue University, West Lafayette, Indiana
Bachelor of HVAC Technology, November, 2013

Skills

Organization
Written Communication
Leadership
Data Analysis
Exhaust Systems
Automotive Maintenance
Body Filler Application
Brake Systems
Use This collision repair technician Resume Template

Not in love with this template? Browse our full library of resume templates

Build My Resume
Build My Resume

collision repair technician Job Descriptions; Explained

If you're applying for an collision repair technician position, it's important to tailor your resume to the specific job requirements in order to differentiate yourself from other candidates. Including accurate and relevant information that directly aligns with the job description can greatly increase your chances of securing an interview with potential employers.

When crafting your resume, be sure to use action verbs and a clear, concise format to highlight your relevant skills and experience. Remember, the job description is your first opportunity to make an impression on recruiters, so pay close attention to the details and make sure you're presenting yourself in the best possible light.

1

collision repair technician

  • Diagnose and estimate damages
  • Repair damages both structural and non structural
  • Ensure repairs are completed professionally and in a timely manner

collision repair technician Job Skills

For an collision repair technician position, your job skills are a key factor in demonstrating your value to the company and showing recruiters that you're the ight fit for the role. It's important to be specific when highlighting your skills and ensure that they are directly aligned with the job requirements, as this can greatly improve your chances of being hired. By showcasing your relevant skills and experience, you can make a compelling case for why you're the best candidate for the job.

How to include technical skills in your resume:

Technical skills are a set of specialized abilities and knowledge required to perform a particular job effectively. Some examples of technical skills are data analysis, project management, software proficiency, and programming languages, to name a few.

Add the technical skills that will get hired in your career field with our simple-to-use resume builder. Select your desired resume template, once you reach the skills section of the builder, manually write in the skill or simply click on "Add more skills". This will automatically generate the best skills for your career field, choose your skill level, and hit "Save & Next."

  • Welding
  • Automotive Electrical Systems
  • Automotive Mechanical Systems
  • Diagnostics
  • Automotive Bodywork
  • Sheet Metal Fabrication
  • Body Filler Application
  • Paint Preparation
  • Automotive Painting
  • Automotive Detailing
  • Automotive Diagnostics
  • Suspension and Steering
  • Brake Systems
  • Automotive Electronics
  • Exhaust Systems
  • Heating and Air Conditioning
  • Automotive Maintenance
  • Automotive Troubleshooting
  • Automotive Repair
  • Automotive Parts Identification
  • Automotive Parts Replacement.

How to include soft skills in your resume:

Soft skills are non-technical skills that relate to how you work and that can be used in any job. Including soft skills such as time management, creative thinking, teamwork, and conflict resolution demonstrate your problem-solving abilities and show that you navigate challenges and changes in the workplace efficiently.

Add competitive soft skills to make your resume stand-out to recruiters! Simply select your preferred resume template in the skills section, enter the skills manually or use the "Add more skills" option. Our resume builder will generate the most relevant soft skills for your career path. Choose your proficiency level for each skill, and then click "Save & Next" to proceed to the next section.

  • Communication
  • Interpersonal
  • Leadership
  • Time Management
  • Problem Solving
  • Decision Making
  • Critical Thinking
  • Creativity
  • Adaptability
  • Teamwork
  • Organization
  • Planning
  • Public Speaking
  • Negotiation
  • Conflict Resolution
  • Research
  • Analytical
  • Attention to Detail
  • Self-Motivation
  • Stress Management
  • Collaboration
  • Coaching
  • Mentoring
  • Listening
  • Networking
  • Strategic Thinking
  • Negotiation
  • Emotional Intelligence
  • Adaptability
  • Flexibility
  • Reliability
  • Professionalism
  • Computer Literacy
  • Technical
  • Data Analysis
  • Project Management
  • Customer Service
  • Presentation
  • Written Communication
  • Social Media
  • Troubleshooting
  • Quality Assurance
  • Collaboration
  • Supervisory
  • Risk Management
  • Database Management
  • Training
  • Innovation
  • Documentation
  • Accounting
  • Financial Management
  • Visualization
  • Reporting
  • Business Acumen
  • Process Improvement
  • Documentation
  • Relationship Management.

How to Improve Your collision repair technician Resume

Navigating resume pitfalls can mean the difference between landing an interview or not. Missing job descriptions or unexplained work history gaps can cause recruiters to hesitate. Let's not even talk about the impact of bad grammar, and forgetting your contact info could leave your potential employer hanging. Aim to be comprehensive, concise, and accurate.

Percy Young 203 Hillside Avenue, Pryorsburg, KY 42066

Employment history

Chief Collision Repair Technician, General Electric Schenectady, New York
February 2013 – May 2022
  • Align vehicle frames, using jacks, turn plates, and measuring instruments
  • Replace and repair bumpers, fenders, door panels, and other body parts
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools
Associate Collision Repair Technician, ABB Cary, North Carolina
February 2012 – January 2013
  • Replace and adjust headlights, taillights, and other exterior lighting
  • Hammer out dents, buckles, and other defects using blocks and hammers
  • Keep records of time and materials used on each repair job
Junior Collision Repair Technician, Raytheon Waltham, Massachusetts
August 2011 – January 2012
  • Fill depressions with body filler, using putty knives, trowels, or sanding tools
  • Inspect damaged vehicles to determine the extent of structural, body, mechanical, and electrical damage
  • Align vehicle frames, using jacks, turn plates, and measuring instruments

Education

Georgia Institute of Technology, Atlanta, Georgia
Electrical Maintenance and Repair, June, 2011

Skills

Analytical
Critical Thinking
Decision Making
Training
Automotive Parts Identification
Automotive Troubleshooting
Welding
Automotive Bodywork

Provide your Contact Information and Address Year Gaps

Always explain any gaps in your work history to your advantage.

Key Insights
  • Employers want to know what you've accomplished, so make sure to explain any gaps using a professional summary.
  • Adding extra details and context to explain why you have a gap in your work history shows employers you are a good fit for the position.

How to Optimize Your collision repair technician Resume

Keep an eye out for these resume traps. Neglecting to detail your job roles or explain gaps in your career can lead to unnecessary doubts. Grammar blunders can reflect negatively on you, and without contact information, how can employers reach you? Be meticulous and complete.

Ollie Quinn 758 Ridge Drive, Franklin, AL 36083
[email protected]
769-060-9796

Employment history

Lead Collision Repair Technician, Boeing Seattle, Washington
December 2019 – Present
  • Hammmer out dents, buckles, annd other defects ussing blockss annd hammers
  • Replacee annd repair bumperss, fenderrs, dooor panels, annd other body parts
  • Keep records of timee annd materials usedd onn each repair jobb
Collision Repair Technician, Raytheon Waltham, Massachusetts
December 2018 – November 2019
  • Hammer out dents, buckles, and other defecs using blocks and hammers
  • Weld replacment parts in position, using electric and gas welders and soldering tooles
  • Repair and replase interior components, such as door panels, upholstry, and air bags
Entry Level Collision Repair Technician, General Electric Schenectady, New York
May 2018 – November 2018
  • "I went to the store to buy some groceries
  • I went to the store too buy some groceries.

Education

University of Illinois, Champaign, Illinois
Master of HVAC Technology, March, 2018
University of Illinois, Champaign, Illinois
Bachelor of Boiler Technology, March, 2014

Skills

Collaboration
Adaptability
Networking
Relationship Management.
Body Filler Application
Automotive Bodywork
Automotive Parts Identification
Automotive Repair

Include Job Descriptions and Avoid Bad Grammar

Avoid sending a wrong first impression by proofreading your resume.

Key Insights
  • Spelling and typos are the most common mistakes recruiters see in resumes and by simply avoiding them you can move ahead on the hiring process.
  • Before submitting your resume, double check to avoid typos.

collision repair technician Cover Letter Example

A cover letter can be a valuable addition to your job application when applying for an collision repair technician position. Cover letters provide a concise summary of your qualifications, skills, and experience, also it also gives you an opportunity to explain why you're the best fit for the job. Crafting a cover letter that showcases your relevant experience and enthusiasm for the Accounts Payable role can significantly improve your chances of securing an interview.



Steve
Evans [email protected]
967-324-2824
625 Country Lane, Sully Square, VA
20171

Chief Collision Repair Technician
Northrop Grumman
Falls Church, Virginia

Greetings Northrop Grumman Recruitment Team


I am writing to express my interest in the Chief Collision Repair Technician role at Northrop Grumman. As a Collision Repair Technician with 16 years of experience in Maintenance & Repair, I am confident that I have the necessary skills and expertise to succeed in this position.


As someone who has always been driven by a desire to solve complex problems and make a difference in the world, I have pursued opportunities to learn and grow throughout my life. My experience in this field has equipped me with valuable skills such as Collaboration and Flexibility that have planted in me a great work ethic. I am excited to apply these skills and my enthusiasm for Maintenance & Repair to the role and contribute to your organization's success.


I am elated about the opportunity to join a team that shares my passion for this field, and values collaboration and innovation. I am confident that together we can overcome whatever tests and challenges are put on our way.


Kindest regards,
Steve Evans
967-324-2824
[email protected]

Steve Evans






CUSTOMIZE THIS COVER LETTER

Showcase your most significant accomplishments and qualifications with this cover letter.
Personalize this cover letter in just few minutes with our user-friendly tool!

Related Resumes & Cover Letters

Looking to explore other career options within the Maintenance & Repair field?

Check out our other resume of resume examples.

FIND EVERYTHING YOU NEED HERE.

IF YOU HAVE QUESTIONS, WE HAVE ANSWERS.

Resume Design Tips and Tricks

Resume Design Tips and Tricks

Creating a resume that stands out from the rest doesn’t have to be rocket science. With just a few tips and tricks, you can make your professional resume a shining...

Read more
last guy

Build your Resume in 15 minutes

Give yourself the best chance of standing out from the competition!

Create an awesome resume that meets the expectations of potential employers with our selection of professional, field-tested resume templates.
CREATE MY RESUME NOW