0a1669bb-79fb-4e78-93e7-959bc22f9349
Professional Summary
I have excellent communication and interpersonal skills.
I am hard working and dedicated at all times and I enjoy taking on new challenges.
I have a high ability to adapt and learn new environments.
I have the ability to effectively participate in Construction and Production projects.
I am driven and determined to succeed.
I am self-motivated and self-disciplined at all times.
I have the ability to present myself to the most senior levels of management.
I have the ability to handle pressure without any hesitation
Employment history
Welding Inspector, Little, Bayer and Daugherty. Shariborough, Pennsylvania
Nov. 2016 – Present
- Ensure all welding defects have been repaired before third party inspections
- Check amps/volts during welding activities and record all readings
- Arrange all Non destructive evaluation activities as required and ensure that Non destructive evaluation request register has been completed with all the required information. E.g. KKS Number, Welder Stamp Number, Description of Weld, Drawing Number, Acceptance Criteria, Inspection Test Plan Number, Weld Process, Unit Number and Weld Number
- Ensure that all documents get given to document controller or filed in the work packs after completion of client inspections (Request For Inspections)
- Complete second line inspection with the Supervisor and record defects on the punch list
- After all defects have been repaired, book inspection with the client with the following paper work-Request For Inspections, Non destructive evaluation Report, Drawing and punch list
- Compile of weld maps, data books or supply Document Controller with all relevant documentation to compile data books
- Ensure that the correct welding consumables have been used as per Welding Procedure Specification and specification
- Do Site inspections when required and complete inspection report
- Complete second line inspection with supervisors and record defects on a punch list
- Arrange final inspection with third party after all defects have been repaired
- Complete all inspection reports during inspections
- Ensure welding control sheet have been filled in during welding
- Ensure that the workforce/projects are working in accordance with EN3834 requirements
- Ensure that all Non-Conformities get recorded and corrective and preventive actions have been completed and implemented
- Ensure that all measuring equipment has been calibrated
- Verification on Hot Boxes to be conducted every year
- Reasonable care of consumables and equipment issued
Lead QC on Site (1 November 2017 – Present)
Primary Function:
- As Mentioned Above (QC Inspector).
- Making sure all QC personnel fulfill their duties in a day as expected from them.
- Attending meetings with client.
- Testing and re-testing of welders as per EN 9606
- Validation of Welding and measurement equipment
Welding Inspector, Herman-Satterfield. Corkerychester, Nebraska
Nov. 2015 – Dec. 2015
- Compile Data Books, oversee all welding on impulse tubing in BOP, Boiler
- Plan all Inspections and welding that needs to be completed
- View Non Destructive Evaluation Reports
Assistant Quantity Surveyor, Casper Inc. New Ferdinandside, New Mexico
Feb. 2015 – Jun. 2015
- Site Measurement, Pre-Site Verification, Site Verification with client (Alstom, Eskom)
- Updating Key Quantity from site
- Compiling Equipment installed of the month for Payment Certificate
- Measurements include racking, cables and instrument pipe installed
Terminator, Moore and Sons. Christiansenton, Texas
Mar. 2012 – Apr. 2012
- Pulling of cables to DCS Panels, UPS Boards, Charger Boards, Junction/Splitter Boxes, LCS and Instruments etc.
- Termination of Cables in Junction/Splitter Boxes, LCS and Instruments etc.
- Earthing of DCS Panels
Education
Northern Rippin, Cherryview, Pennsylvania
Diploma, Welding Inspection, Present
Skills
Welding Inspection
Supervision
Computer Literate
welding inspector
- To check approved WPS
- To check the approved drawings
- To check the condition of welding consumables.
- To check the fit-up and welding inspection before, during and after.
- To implement the ARAMCO standards. (SAES W12)
- Perform cleaning inspection of pipe lines.
- To check the approved JCC of welders as per client instruction.
welding inspector
- Operate Robot Welding Machine,and edit and change required program
- Monitor employee productivity
- Maintain employee updated personnel records
- Monitoring safety Accessories
- Issued Parts and give stock report to supervisor for arrange parts
welding inspector
- Performed raw material and finished parts inspection, welding and fabrication inspection as well as witness of factory acceptance testing for an ISO 9001 vertical turbine pump manufacturer.
- Was responsible for development, qualification and implementation of welding procedures and maintenance of welder qualification records.
- Assisted with or performed bid and proposal reviews for new contracts.
- Maintained and compiled quality and fabrication documentation for submission to the Client/end-user.
welding inspector
- Read dials or meters to verify that equipment is functioning at specified levels.or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
- Ensure that all measuring equipment has been calibrated
- Verification on Hot Boxes to be conducted every year
- Reasonable care of consumables and equipment issued
welding inspector
- Complete all inspection reports during inspections
- Ensure welding control sheet have been filled in during welding
- Ensure that the workforce/projects are working in accordance with EN3834 requirements
- Ensure that all Non-Conformities get recorded and corrective and preventive actions have been completed and implemented
welding inspector
- Ensure that the correct welding consumables have been used as per Welding Procedure Specification and specification
- Do Site inspections when required and complete inspection report
- Complete second line inspection with supervisors and record defects on a punch list
- Arrange final inspection with third party after all defects have been repaired
welding inspector ( onshore pipeline )
- Reviewed welding procedures developed by contractor.
- Witnessed contractor conducting PQR.
- Liaised with Inspector from contractor, client side and Third Party Inspector for WQT, PQR and mechanical testing.
- Incharged in material receiving inspection.
- Monitor and witness welding activities which include both at site and fabrication yard
- Involved in NDT inspection and RT film interpretation.
welding inspector
- Ensure all welding defects have been repaired before third party inspections
- Check amps/volts during welding activities and record all readings
- Arrange all Non destructive evaluation activities as required and ensure that Non destructive evaluation request register has been completed with all the required information. E.g. KKS Number, Welder Stamp Number, Description of Weld, Drawing Number, Acceptance Criteria, Inspection Test Plan Number, Weld Process, Unit Number and Weld Number
- Ensure that all documents get given to document controller or filed in the work packs after completion of client inspections (Request For Inspections)
- Complete second line inspection with the Supervisor and record defects on the punch list
- After all defects have been repaired, book inspection with the client with the following paper work-Request For Inspections, Non destructive evaluation Report, Drawing and punch list
- Compile of weld maps, data books or supply Document Controller with all relevant documentation to compile data books
welding inspector
- Performed material verification, in-process and final inspection of new fabrication and/or refurbished deepwater drilling components: wellhead housings, riser joints, crossover and shoe joints.
- Responsible for maintenance, review and updating of company-wide welding procedures as well as welder performance qualifications.
- Was the first female shop floor inspector in the company.
- PAUT technician in Tanjung Bin 1000mw Power Plant
welding inspector
- Transport prefabricated parts to construction site for assembly and installation.
- Inspect individual fabricated assemblies, and installations for conformance to specifications , reject unsatisfactory welds or fabricated assemblies
- Inspect completed welds
- Witness welder codings
welding inspector
- Compile Data Books, oversee all welding on impulse tubing in BOP, Boiler
- Plan all Inspections and welding that needs to be completed
- View Non Destructive Evaluation Reports
- Develop visual inspection procedures.
welding inspector ( onshore and offshore )
- Ensure all measuring and monitoring equipment were calibrated and update and maintaining calibration records.
- Performed daily material and welding inspection including coordination of yard inspection activities for all ongoing project.
- Involved in NDT inspection and RT film interpretation reports review as per project specifications and standard.
- Performed structural fit-up and visual inspection at offshore.
- Monitor piping and equipment installation at offshore is correct and as per isometric and general arrangement.
welding inspector
- Inspected weld plates and pipe and reporting to senior welding inspector.
- Check the welding procedure as per WPS.
- Check each and every detail before, during and after welding.
- Tested material with Destructive and Non-Destructive Testings.
- NDT such as Magnetic Particle Testing, Visual Testing, Ultrasonic Testing, Penetrant Testing and Radiographic Testing.
welding inspector
- Inspected weld plates and pipe and reporting to senior welding inspector.
- Knowledge of how to understand ASME.
- Verify welder, test reports, WPS and PQR.
- Check the welding process as per WPS.
- Safety requirements.
- Preheating as per WPS.
- Check each and every detail before,during and after welding.