• Read blueprints, lay out and weld products per wps guidelines
• Designate jobs among my team members
• Fix mistakes made by other members of my team
• Solve problems on the spot to keep production moving
• Test products or subassemblies for functionality and quality.

• Fabricated and welded custom projects for Mining, Oil and Gas, and Agriculture industries using Aluminum, Stainless, and Carbon steels;
• Used a variety of welding processes such as: GMAW,SMAW,and TIG;
• Ability to read and interpret complex blueprints;
• Ensured high quality products were completed accurately and efficiently;
• Operated brakes,shears,rollers, and drill presses;

• Steel Erection
• Structural Steel Welding
• Conveyor Repair
• Maintain Equipment

• Tig welding
• Silver solder
• Tight fit ups and proper rotation of welded parts
• Operated tube benders and flaring machines
• Overseeing operations in a bend and weld department in charge of manufacturing bike racks 
• Fork lift proficient 

• Weld separately or in combination using aluminum and stainless steel.
• Responsible for observing and complying with all safety and project rules. Performs other duties as required
• Apply shop mathematics to solve problems
• Compare and see differences in the size, shape and form of lines, figures and objects

• Analyse engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Recognise, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed
• Flame cutting and knowledge of torch use

• Welder for an outside contractor that does various maintenance at EJ foundry.Review blue prints, gather materials, and cut to size with either a band saw, plasma cutter, torch, or cut off grinder. Fit and weld replacement/repair parts into place.
• Move existing/ install new crane ways, jibs, and trolleys. Rework / install new airlines to hoists. 
• Weld replacement duct work in our shop and install on site. 
• Assess the job, gather proper tools, set up torches, welders, put up caution tape if needed, and lock out proper equipment. When finished clean and paint over welds, and clean up the work area.
• Coordinate with other professionals, such as maintenance supervisors and engineers to ensure job success.
• Operate and understand intuit quick books for estimates and invoices. 

• Weld components in flat, vertical, or overhead positions. 
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. 
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. 
• Repair tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts

• Performs minor maintenance or cleaning activities with tools and equipment
• Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers
• Signals crane operator in lifting parts to specific positions
• Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage

• Guide and direct flames or electrodes on or across work-pieces to straighten, bend, melt, or build up metal.
• Position and secure work-pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Executed all welding work per approved specification  
• Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches

• Locates and marks reference points for columns or plates on foundation, squares, transit and measuring tape
• Attaches rigging or signals crane operator to lift components to specified position
• Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles
• Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together
• Bolts or arc-welds structures and sections together
• Positions drums and headers into supports or bolts or welds supports to frame
• Aligns water tubes, connects and expands ends to drums and headers using tube expander

• Work as a Welder/Fitter manufacturing various styles of rail cars.
•  Worked from blue prints to fabricate, fit, and weld, various rail car components into completed product.
•  Utilized all shop equipment including but not limited to, welders, cutting torches, plasma cutters, jigs, drill presses, and overhead cranes to accomplish task.
• Maintained and updated work and materials logs

• Ship ramp manufacturing
• Hoist operations
• set up and operated a variety of fibre-producing machines
• welded aluminum frames together using a MIG welder

• Prep all tools and protective gear. 
• Follow all safety procedures. 
• Perform welds on heavy materials. 
• Carry materials of heavy weights. 
• Put away all safety gear and tools. 

• Hired in as a welder and then moved into fit up, layout, drill line, burn table and then into maintenance dept. Each department having their own job and sequence numbers to work by, which also meant different phase in the blue print to follow by.
• Properly certified in the use of forklifts, overhead cranes, use of oxyacetylene on regular basis and trained on the burn table and drill line. Also operated a large hydraulic chamber machine, and other various machinery such as press, shears, beveller, angle cutter, and piranha.
• Worked in the maintenance department for the last 8 months; job duties included daily inspections of forklifts, overhead cranes and heavy machinery. Also kept a constant watch of the pressure on three big compressors.
• Also performed preventative maintenance on equipment such as a Wysong and Cincinnati shear, Delouris press and multiple hand and power tools. 

• Performed site construction, maintenance and shutdown based at Anglo American Plant
• Weld at heights in all position pipping and structural 
• Weld big bore and small bore pipes, and mining structures inside steel fab-shop and so site installs
• Weld tested and coded with A.S.M.E section IX of Boiler and Pressure Vessels

• I unload trucks full of steel
• Set up the oxygen and gas tanks
• Hook up the blow torch to it
• Cut steel 
• Load the cut steel back onto the truck
• Strip copper wires

• Fit
• Fabricate
• Metal/wood/dirt/concrete work in a food plant environment, requiring the jobs to be sanitary.
• Calculate dimensions or tolerances, using instruments such as micrometers or vernier calipers. 

• Maintained, operated, and repaired wide variety of welding equipment.
• Fabricated metal structures by using welders, cutters, shapers, and various measuring tools.
• Maintain clean safety record while using hand and power MIG welding tools through strict adherence to industry and company safety guidelines
• Interpreted blueprints, diagrams, sketches, and plans to determine appropriate materials and time frames for projects.
• Identified defects, responded to malfunctions, and restored normal operation while interpreting blueprints and manufacturer’s specifications 

• Dissemble/Refurbish or build new electromagnetic stirrer motors used in steel mills.
• Read and follow blueprints, respond with any corrections needing to be addressed for future projects.
• Assemble jigs using overhead crane to build new units.
• Fitting and welding, mild steel to stainless steel
• Assist in wiring inner copper cores to board
• Assist in load testing assembled motors

• Fabricates equipments by cutting, burning and welding various metals. Repairs equipment by using welding techniques and appropriate welding equipments.
• Uses plans, diagrams, blueprints and work requests to determine project design and works with requester to insure needs are met.
• Effectively layout designs, measuring and cutting bars and pipe.
• Selects, positions, aligns, and bolts parts or fixtures to be welded.
• Read, understand and follow all safe work practices and procedures for welding machinery and equipment.

• Convert blueprints into shop drawings to be followed in the assembly of sheet metal products.
• Inspect individual parts and installations for conformance to specifications and building codes, using measuring instruments such as calipers, scales, and micrometers. 
• Made precision cuts to the 1/16 of an inch
• Fabricated and installed railings and glass window frames 
• Mig welded, tig welded and flux solder
• Lay out, measure, and mark dimensions and reference lines on material according to drawings or templates, using scribes, squares, and tape measures.

• Worked through Advanced Tank for Space X at the Boca Chica Launch site in Brownsville, Tx. Performed multiple roles in building the Interplanetary Spaceship Prototype Mark I.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, and submerged arc welding.
• Aided in design of and fit up of upper nitrogen thrusters.
•  Fit up and welding all of the hydraulic lines that operated the outer wing assemblies.
•   Worked in unison with the Space X crew to keep the job on schedule and running smoothly.

• Use Mig and Tig welding processes to weld hot rolling stainless and aluminum components in accordance with design and work order
• Order parts from the inventory lists
• Assemble parts and prep for welding
• Read plans and work orders for the specifications of welding
• Weld grinding and finishing
• Inspect finished welds according to established tolerances
• Gouge metals using the air-arc gouging process.

• Operated heavy duty lathes, boring machines and mills, planers, CNC plasma cutting table, metal break, and grinders.
• Overhauled heavy machinery componets such as pumps, fans, hydraulic motors, hydraulic and pneumatic cylinders and gear reducers.
• Operated forklifts, hoists and other material handling equipment.
• Assembled and set various boring, slotting and turning heads.
• Removed burrs on all machined parts.
• Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations andpositions.

• Removed rough spots from work pieces with portable grinders, hand files and scrapers.
•  Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions. 
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
•  Fabricated shop parts directly from blueprints. 
• Bolted, clamped and tack-welded parts to secure components prior to welding. 
• Salvaged and rebuilt parts whenever possible.

• hang steel, fit, then weld carbon steel
• operate equipment such as man lifts, crane, and fork truck in a safe manor 
• work in all types of weather conditions and elements
• lay out applications to be permanently fixed to the tank 

• Remained flexible to the scheduling needs of the business, including evening and weekend shifts.
• Identified defective, lost or missing merchandise and promptly reported issues to supervisor.
• Maintained a clean and safe work area.
• hardware list

• Became lead welder in 6 months
• Certified in welding in all positions MIG, TIG and Stick
• Became Night Shift Foreman after 5 years
• For the last 5 years I was Field Service Representative

• cutting of materials from shipping length
• piece mark numbers
• Fabrication of metal materials
• Welding of materials MIG welding 0.35 solid wire,0.45 dual shield,0.63 5356 Aluminum push and pull pulse with tri gas,Aluminum spool gun,FCAW”stick”.
• 304/316 stainless, Corten steel,carbon steel,t6 aluminum,4130chromoly
• clean work area
• materials list