technician Archives

Test drive vehicles to reproduce and evaluate customer concerns.
Diagnose intermittent drive ability faults.
Perform inspections and make recommendations for repairs.
Perform repairs according to approved procedures.
Keep a clean and orderly work station.
Assist in shop maintenance and cleaning as required.
Important for customer satisfaction.

Mount and balance wheels and tires.
Install performance parts such as Suspension, Engine upgrades, Racing seats, Roll bars, Aero parts, Big brake kits, etc.
Perform Rod bearing replacements
Perform alignments
Perform BMW Vanos upgrades
Clean and organize shop on downtime.

Learn locations of all HVAC equipment and how they relate to each building.
Maintain and repair all HVAC equipment and components to manufactures recommendation, i.e. valves, motors, belts, bearings, filters, and lubrication etc.
Learn basics of equipment management controls (metasys) to be able to start,stop, seek status or change conditions on HVAC systems.
Make rounds of all equipment rooms identify and repairing any potential problems and keep the systems and rooms clean.
Inspect current HVAC systems for effectiveness and safetyPerform preventative maintenance on HVAC systems to increase longevity.

Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
Cut, trim, file, bend, and smooth parts, and verify sizes and fitting tolerances in order to ensure proper fit and clearance of parts.
Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
Swage fittings onto cables, using swaging machines.

I’m a technician for this company products
CCTV (installation and service),
solar inverters and solar panel (installation), automations ( automatic remote gate, automatic water level controller, security alarms, motion sensors.etc)
After 6 months of training I become I field assistant and then when on to be a main technician this company for 6 years .

Assist in maintenance repair and troubleshooting.
Analyse and repair problem occurring in the production machine or equipment.
Assist in total production maintenance preparation.
Monitor machines and equipment performance and report to supervisor for immediate action to be taken.
Assist supervisor in charge in developing and implementing methods, techniques, and procedures for repair and maintenance of the machines / equipment.
Collect and record the data as reasonable practicable within working area, minimizing downtime of machines and equipment.
Assist maintenance preventive maintenance task

Familiar in different International codes and standards such as ASME B31.3, ASME B31.1, API 1104, ASME SECTION 8.
Diagnosing electrical components with testing equipment.
major component removal, engines, transmissions, differentials, transfer cases.
major engine repair, cyl heads, bearings,rings,water pumps, timing chains,gears.

Monitor production line.
Prepare quality alert if have any quality issues.
Prepare and update work instruction (WI) for new model.
Find root cause and solve issues in production line.
Data compilation.
Prepare report for MPV build.
Prepare and monitor for run lot EBR and MPV.

This company specializes in the production of Blender/Mixers, the larger clients dealt with are for example. “Crown National”, “Deli Spices”, “Shoprite Group”, “Checkout”, “Freddy Hirsch”, “Spar”,”Pick’n’Pay” and many other food companies.
This kind of exposure is so diverse, the many different processes of food companies would have to be attended to from blenders/mixers for Whey powders to Masala Powders as well as for meat mixers.
Servicing butchery equipment will be the key role, going onto the road to service and maintain stores so they meet their audit standards, different companies were moderated by separate agencies.
Keeping a professional relationship with all store managers and to ensure no call-backs no matter the task that was set forward for the day.
Problem-solving and fault finding mostly on contactors/overloads for 3 Phase electricity.
Attending to local deliveries of the manufactured goods.

Oil changes, greased chassis and suspension parts
Diagnose and repair drum and disc brake type systems
Diagnose and repair leaf spring and coil spring suspension systems
Perform engine tune ups to ensure proper operation
advanced drive-ability diagnoses
Component rebuilding, especially skilled in Carburetor diagnoses remove, overhaul,reinstall and tune.
Gasoline ignition system diagnoses and repair ranging from distributor removal and rebuilding, function testing. points replacement and setting. condenser diagnosing and replacing.

Clutch jobs
Engine repairs
Utilizing software for diagnosing
Parts room organization

Provide production engineering support in process of yield, line balancing, capacity improvement and optimize through consistently review of the machines.
Define process problems that lead to throughout or quality issue, evaluates root cause, implement solution to stabilize processes and evaluate results.
Prepare and review yield reports, perform analysis to improve production yield.
Familiar in ultrasonic testing, magnetic particle testing, liquid penetration testing, radiographic testing, radiographic film interpretation & visual testing.

Acting as an assistant technician for the CECCE (Central East Catholic School Board)
Acting as a technician for events held at Garneau Catholic High School
Extensive hours spent learning
Provide technical training to newcomers.

Completed daily inspections of all electronic equipment’s.
Installed electrical conduit and wiring for power, control and lighting.
Stayed up-to-date on electrical codes and safety procedures to maintain efficiency and safety.
Notified supervisor immediately about equipment problems and breakdowns

Installation and service of pre engineered and engineered fire systems and portable fire extinguishers.
Extensive training in Ansul, Pyro Chem, Range Guard, Buckeye, Protex and Amerex fire suppression systems.
Certification in OSHA training.
Service and repair emergency lights

One of eight IBM 200mm and 300mm product hand-carrier. (direct client deliveries) Imported and delivered secure prototypes and masks, product to clients and suppliers, production their B/A world wide.( especially AP) Familiar with worldwide import/export manifests customs /duties requirements
Exterminate Houses
Termite inspection and pretreatment
Bee Extraction

Perform Daily, Pre and Post Flight inspection in accordance with appropriate maintenance manual
Carried out refueling, de-fueling and servicing aircraft
Carried out removal and installation of aircraft parts and components
Talking to pilot to get information from them regarding an aircraft’s performance
using power tools and applicable test equipment
experience on Cessna 172, Cessna Caravan 208B, Robinson R44

Examine vehicles, compile estimates of repair costs, and secure customers’ approval to perform repairs.
Record results of diagnostic tests.
Set up equipment for employee use, performing or ensuring proper installation of cables, operating systems, or appropria
Adjust, repair, or replace electrical or electronic component parts to correct defects and to ensure conformance to specifications.e software.

Modify, maintain, and repair facility equipment, building and systems to ensure that they function properly.
Coordinate and supervise with contractors to perform works related to Facilities works.
Direct the work of contractors or staff in the implementation of A&A and
Perform Facilities maintenance duties such as handyman works, electrical, plumbing, carpentry, painting etc.

Installation of CCTV, intercoms and remote access systems.
Installation of Garage doors, security gates, boom gates and safety bollards.
Travel to customers’ premises/Radio Sites to install, maintain, or trouble shoot internet /Radio/VSAT equipment or accessories.
Provide Weekly Reports/Monthly Reports/Vehicle Report.

2+years experience in Electronics Defense & Aerospace products manufacturing and Interconnecting cables and wire harnessing field.
Qualified & certified by ISRO/Dos for Hi-Reliability electronic fabrication & Quality. Working for ISRO project through centum industries.
Qualifying new part from New/existing suppliers, material such as mechanical Packages & PCBs.
Generating monthly supplier quality rating report & circulating the same across relevant teams.
Tracking & review activities of IQC & process rejections daily & communicating the same to buyers & suppliers.(MRB- Material Review Board)
Work experience in Clean Room Standards (CLASS 1000, 10,000 & 1, 00,000).
Proven expertise in Incoming material inspection for Frequency Controlled Electronic products for Global communication, Industrial and Space applications.

Drive vehicles to or from workshops or customers’ homes.
Clean and perform full safety inspection of chimneys, flues, and fireboxes.
Trained all new employees and helped them to advance within the company.
Maintained a clean work environment, and ensured all employees wore PPE.

Develop own online game private server
Monitor client server
Debug program
System management
Server management

Performed express services such as oil changes, installing winter tires,
replacing/repairing tires, brake fluid flushes
Displayed teamwork and communication skills
Performed alignment checks on vehicles to determine if the alignment was necessary
More information available upon request

Tasked to manage the HVAC equipment for the purpose of extending its useful life while reducing its overall life-cycle cost.
Performed regular and routine hands-on inspection of HVAC systems equipment to identify potential problems and maintenance issues.
Implemented corrective courses of actions to repair problems and issues within a realistic time frame.
Review project details and standards to ensure the project will done correctly and on time.

CATV system installer/Service
Tripple play install/telephony
underground/overhead installation/service
Customer education/understanding about equipment

Testing computers to determine if they work
Tearing down computers into individual components
Quality control of individual components
Inventory maintenance through use of Excel
Meticulously documenting all work done
Research and development of methods to make processes more efficient

Budgeting & finance specialist
Advertising
Communication (People) Skills – Currently Bonded
Problem Solving Techniques

repair and replace damaged or worn parts
Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers’ specifications
inspect and test machines to find or diagnose the problem
read and understand parts brake downs and special instructions
dismantle and reassemble using hand tools

To carry out mechanical repair work to a wide range of passenger vehicles, including scheduled servicing, parts replacement, fault diagnosis and vehicle testing.
To work effectively either individually or as part of a team.
Troubleshooting and detecting problems in Computers.
Installing and performing minor repairs to hardware, software, or peripheral equipment, following design or installation specifications

technician

technician

technician

junior technician

technician

technician (trainee)

technician / sales associate

senior technician (process)

technician

technician / mechanic

technician/mechanic

technician

technician

technician

technician

technician

junior technician

technician

technician

technician

technician

technician

technician (online game private server)

technician

technician

technician

technician

technician

technician

technician