technician Archives

Evaluating the condition of underwater pipelines using sidescan sonar systems
Marine seismic data acquisition and its QC
Assisting with base tasks, tool testing and preparation while onshore and offshore
Install New Garage Doors

Answer students regarding computer software or hardware operation to resolve problems.
Set up equipment for students use, performing or ensuring proper installation of cables, operating systems, or appropriate software.
Assembly of speed governor and recorders
Analysis and repairing of fabricated speed governor/recorder, signal generators, and invertor circuits

Monitor all parts and devices used on each service call
Communicated product and machine failure details to the design team and reliable departments.
Communicate with pet owners to ensure proper care is performed.
Exercise animals multiple times a day.

Contributed new ideas, or other changes to increase production or improve standards.
Align, fit, or assemble component parts, using hand or power tools, fixtures, templates.
Train others to install, use, repair,or maintain machine.
Troubleshoot equipment, or systems, using electronic test equipment such as logic analyzers.

Sourcing vehicle components and selecting the best materials to use
Providing technical advice and answering queries from clients
Making improvements to vehicles in response to customer feedback
Investigating and solving problems, eg mechanical failures

Gretting customers and guiding them into the desired bay
Performing visual headlight and windshield wiper safety inspection
Checking all fluid levels of the car and adding fluid if necessary
Filling tire pressure to correct specification
Visually inspect engine bay for anything abnormal that should need attention
Test battery of each car being serviced
Maintain the top-side of the garage and keep the area tidy

Suggest specific product purchases to meet customers’ needs in vehicles and caravans to run 12/24 volt dc appliances, quote on solar installations on caravans and vehicles, assist in the installation of products.
Manage Busseleton shop on 3-5 day roster and manage Bunbury Shop as required.
Unload delivery of bulk batteries using 2 tonne forklift.
Handled various assembly line as sr. technician

Assemble, install, test, and maintain electrical or mechanical wiring, equipment, appliances, apparatus using handtools and power tools ;
Inspect electrical systems, equipment and components to identify hazards, defect, and the need for adjustment or repair to ensure the electrical system in a good condition;
Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of breakdown and correct the problem;
Repair or replacing wiring , equipment, and fixtures, using hand tools and power tools
Maintainence, repairing, servicing air conditioning using hand tools and power tools.

Installed and removed tracking device system(GPS) in a car such as (Toyota, Mitsubishi, Honda, Ford, Hyundai, Chevrolet, Nissan, Kia, etc.), including pulling wire harness, device termination and mounting back boxes.
Carefully explained all aspects of running the tracker system to customers.
Examined systems to locate problems such as loose connection and faulty components.
Conduct jurisdictional and another required testing.
Tracked data from the completed test, and developed solutions to any issues.
Set up and monitored testing of new and improved components.
Create and maintain activity logs.

support SMT line production;
switch line to another product (changeover);
repairs of low and medium complexity;
line installation/dismantling;

Assemble electrical or electronic systems or support structures and install components, units, sub-assemblies
Measure and adjust voltages to specified values to determine operational accuracy of instruments.
Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
Instruct customers in the installation, repair, or maintenance of products.
Distribute materials, supplies, or subassemblies to work areas.
Test faulty equipment to diagnose malfunctions, using test equipment or software, and applying knowledge of the functional operation of electronic units and systems.
Inspect components of industrial equipment for accurate assembly and installation or for defects, such as loose connections or frayed wires.

Apply or release chemical solutions or toxic gases and set traps to kill or remove pests and vermin that infest buildings and surrounding areas.
Determine whether a building is infested with termites.
Both a termite inspector and a termite control technician.
Vendor company that serviced and repaired air conditioning at Adventist hospital. Service and repaired air conditioning like ACSU, AHU, VRV,FCU. Did work at TF AMD like piping, painting, platform for machine, and repaired cooling tower.

Install cables to new and exisiting buildings.
Work with a team to co-operate and complete set tasks.
Inspect sites to determine physical configuration, such as device locations and conduit pathways.
Document technical specifications and operating standards for telecommunications equipment.

Maintain relay assembling machine.
Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
Train others to install, use, or maintain robots.

Perform routine vehicle maintenance such as regulating tire pressure and adding oil, transmission fluid, and coolant.
Perform minor vehicle repairs such as cleaning spark plugs, and replacing batteries.
Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles.
Provide preliminary sketches or cost estimates for materials or services.

Trim or pick flowers and clean flower beds.
Plant seeds, bulbs, foliage, flowering plants, grass, ground covers, trees, or shrubs and apply mulch for protection, using gardening tools.
Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment.
Advise management on whether continued operation of equipment could be hazardous.

Install and perform minor repairs to hardware, software, or peripheral equipment
Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures.
Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.

Maintenance reach stacker ( Linde Mark 5 ).
Repairing Hydraulic and electrical parts of reach stackers.
Maintenance and repairing of Electric Forklift.
Install ground leads and connect power cables to equipment, such as motors.

Repair or replace broken or malfunctioning components of machinery or equipment.
Clean, lubricate, or adjust parts, equipment, or machinery.
Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.
Connect cables, tubes, and wiring, according to specifications.

Evaluated systems to identify and locate system malfunctions using visual, manual and computer-assisted diagnostic approaches.
Installed new wiring and connections to complete connections and bypass cable faults.
Assembled electrical and electronic systems and prototypes according to engineering data and knowledge of electrical principles, using hand tools and measuring instruments.
Performed acceptance testing and measurements on electronic components and assemblies to verify system compliance.
Manual Pulse Generator – Open the player button, clean the inside of the competition and then re-install all.
Power Supply DC – Change the adjustable resistor 10k ohm to the volt meter portion.
Hand MIxer – Make new wires connected.

Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
Inspect newly installed equipment to adjust or correct operating problems.
Connect wires to circuit breakers, transformers, or other components.
Repair or replace wiring, equipment, or fixtures, using hand tools or power tools.
Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools.
Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.

technician

technician

technician

technician

technician

technician

technician/retail

technician

technician/installer

technician

technician/driver

technician

technician

technician

technician

technician

technician

technician

technician

technician (intern)

technician