01607c37-7d75-4e12-bba2-8ec9d68929f5

Andrew Smith

Professional Summary

Highly-motivated focused professional with 6 years of experience as an Quality and Design engineer.  Adept at identifying and implementing Inspection process optimization and control methods to eliminate Non Conformity.  Consistently participates in lean manufacturing and continuous improvement initiatives.  Strong project engineering and planning skills with keen ability to multi-task in a fast-paced, results-driven environment.

Employment history

QUALITY INSPECTOR, Schowalter-Bernhard. Marlonmouth, New Hampshire
Feb. 2018 – Present
  • Worked closely with casting, forging & machined parts supplier.
  • Lead a design change to eliminate fallout on incoming material.
  • Provided technical support to manufacturing to help identify root causes for defects. 
  • Lead the Material Review Board Team.
  • Attended LEAN basic training course to gain exposure to LEAN manufacturing concepts.
  • Work on Productivity Process tool KATA and reduce Waste of Activity by 70%.
  • Having Knowledge of GD&T after Training attended.
  • Having Used to a Design Software Solid works.
  • Certify NDT Level-II (PT, MPT, RT, UT & VT) as per SNT TC-1A and PT Level -II as per EN ISO 9712.   
  • Interpretation of International Codes & Standard, Like ASME B16.5, ASME B16.34, ASME Section IIA, IIB, IIC & Section IX, Etc…
  • Prepare documents WPS/PQR and WPQ for Qualification of Welding.
  • Lead continuous improvement through closed loop 8D Supplier Corrective Action System.
  • Utilize of 7 Q.C tools. 
  • Complete Yellow belt Training include 5S, Six Sigma, Lean, Kaizen etc… And follow it.
  • Perform First Article Inspection at developing stage of new component. 
  • Use of 3D Technology instruments for Inspection like FARO GAGE, 3D Scanner & Profile Projector. 

QC & DESIGN ENGINEER, Orn-Stokes. Buddyburgh, New Mexico
Nov. 2013 – May. 2014
  • Responsible to manufacturing components as per QC requirement. 
  • Prepare Quality documents to every inspection stage.
  • Inspect the job while in receiving, in process & final inspection.
  • Final Inspection Report preparation. 
  • Prepare QAP/ITP and GA Drawing for a Customer Approval.
  • Prepare a Design of Part Component.
  • Co-ordination with Third Party Inspection.
  • Check & Monitor NDT.
  • Repair reducing activities & Problem solving and maintaining quality and welding Documents.
  • Carrying out at shops/stores, Inward, In- process & Final Inspection.

Education

East Quitzon Institute, Port Michalland, Nebraska
GED, MECHANICAL ENGINEERING, Oct. 2012

The Kentucky Academy, Schusterport, Illinois
High School Diploma, SCIENCE, Nov. 2008

Personal info


Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Skills

GD&T








INTERNATIONAL CODES AND STANDARD








NDT








WELDING








LEAN








DESIGN SOFTWARE








2cf2eb53-a4dd-4dc6-b5a1-cc703449bb2a

Andrew Smith

287 Custer Street, Hopewell, PA 00000
andrew_smith@example.com
(000) 000-0000

Professional Summary

Quality inspector with the trained skill to have extraordinary attention to detail and follow every company standard for each product. Highly proficient with communication with my team members as well as upper management. Exceptional level to multitask and see that every task is completed. Machine operator experience and team leading skills. My responsibilities included following company guidelines and operating multiple machines at a time. I am experienced in training new employees by using my team lead training and following company policy.

Employment history

Quality Inspector/ Machine Operator, Botsford Inc. Kunzechester, Indiana
Jun. 2018 – Nov. 2018
I was a lead team member in quality inspections. My job duties included meticulous inspections and following training for finding defects in products. Meeting with quality team members to discuss new quality inspection alerts as well as finding the solution to problems through the process. My responsibility as a Quality inspector was to make sure that each product met the standards we had set in place before being sent to shipping for our customers.

Team lead sales, Larson, Hane and Rath. New Chance, Alaska
Sep. 2016 – Feb. 2017
Bridal consultant with over 4 years of experience. Highly successful in the ability to manage clients in large numbers and devote to clients as my number one priority. My skills in customer service and sales allow me to give each client a unique and special experience. Through my positive and hardworking attitude i always continue to grow and see every moment in sales from a profitable vision.

Education

Eastern Green College, Port Daysi, Wisconsin
High School Diploma, General, Apr. 2011

Skills

Machine Operator
Experienced

Quality Inspector
Experienced

Sales Management
Expert

Team Leader
Experienced

2ed3739d-92a5-46ca-a464-38bfb2930a28

Andrew Smith

287 Custer Street, Hopewell, PA 00000
andrew_smith@example.com
(000) 000-0000

Professional Summary

To work in a firm with a professional work driven environment where I can utilize and apply my knowledge, skills which would enable me as a fresh graduate to grow while fulfilling organizational goals.

Strength:-
Positive thinking towards my carrier, Enthusiastic to doing new works, smart working , good leadership as well as follower.

Personal Details:
Name:- Shekapure Vaijanath Ramrao
D.OB:
7th September 1993
Permanent Address:
At.Post.Bahaddarpura Tq.Kandhar Dist.Nanded
Gender:
Male
Marital Status:
Single
Phone No:
+919503959491
Email:
vshekapure@gmail.com
Nationality:
Indian
Languages:
English, Hindi, Marathi.
Hobbies
Reading Books, Playing Sports.

I declare that the above information is true to the best of my knowledge.

Employment history

Junior Quality Inspector, Runte-Schoen. Skilesbury, Alaska
Jan. 2018 – Feb. 2018
I had worked in that company  as Junior Quality Inspector as responsibility is to checking the all dimensions of the Bearing & also checked operation missing.

Trainee Engineer, Franecki LLC. Lake Thaddeus, Texas
May. 2014 – Jul. 2014
I had worked in Production Department as Trainee Engineer & operating CNC Machine.
I had handled various Measuring Instruments Like Vernier caliper,Micrometer screw gauge,Thread Gauge,plain plug gauge & various machining Tools like Reamer tool,Grooving Tool,Radius mill,end mill,drill bit,tap,Trimos machine etc 

Education

East Abshire, North Aileenshire, Missouri
Bacholar of Engineering, Mechanical Engineering, Oct. 2017

Northern Conroy College, New Westontown, Hawaii
High School Diploma, Mechanical Engineering, Apr. 2013

Western Shields College, Armstrongshire, Virginia
10th std, S.S.C., Nov. 2008

Skills

MS Office
Skillful

Online Marketing
Skillful

HTML5
Beginner

a1271cc4-be2d-47db-b118-c58134ef6b7e

Andrew Smith


Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Have many years of experience operating a silicone coating machine. Multi task while operating, such as, recording results to paper or making sure machine is being fed materials properly. My years of operating have made a transition to quality Inspector. Can identify and help solve problems with products. Quality, safety and efficient production are very important to me.

Employment history

Jun. 2019 – Present
South Twanna, Hawaii
Quality Inspector, Pfeffer, Kling and Lueilwitz

Use QDMS software to accurately record data from samples of paper or film products. Look for defects in numerous products during production and also before it leaves the plant. Use various testing equipment such as moisture testing and caliper testing on paper and films.  

Nov. 2013 – Present
East Miriammouth, Iowa
Machine Operator, Harvey-Gusikowski

Set up and operate a silicone coating machine, following a SOC and constant monitoring of quality or maintenance issues.  Use a hoist to load and unload rolls onto machine.  Use scales to measure and properly add chemicals to batching equipment. Preform light maintenance on machines if broken down.  Use static reader to record results to paper.  Prepare daily paperwork of problems or success throughout shift. 

Sep. 2006 – Apr. 2007
Lake Jeane, Washington
Owner, Morissette-Murray

Owned and operated a precast concrete company.  Used a fork lift to move products from area to area. Also used skid loader to move rock and sand for use in mixing of concrete.  Used a concrete mixer to mix concrete to pour into various molds from stepping stones to precast steps.  Used a crane truck to deliver and set various products.  

Education

Mar. 1996
High School Diploma: General

  • East Kuhn – Port Fletcher, Delaware

Skills

Use crane hoists
Expert

Accurate record keeping
Expert

Quality testing
Experienced

Set up and operate machines
Expert

340ba136-cad5-484e-b917-f7602665db24

Andrew Smith

Professional Summary

Applicant with 6 years of manufacturing experience seeking role as a general laborer/assembler.  Comprehensive knowledge of fast-paced working environment, standing for long periods of time, and lifting 50 lbs. or more.  Very enthusiastic, a very fast-learner, and have 2 years of quality experience.

Employment history

Quality Inspector, Will, Adams and Bartoletti. Cristiburgh, New Jersey
Aug. 2019 – Present
Quality Inspector’s over see all automotive parts being made and spot check finished goods before shipping to customer. We make fuel lines for all different kinds of vehicles. Quality Inspectors also make sure machine is running correctly, that it’s on the correct part number/program, and make sure all the correct components are being used. 
  • Inspect materials, products, or equipment to detect defects or malfunctions.
  • Observe work and monitor gauges, dials, and other indicators to ensure that operators conform to production or processing standards.
  • Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
  • Mark items with details such as grade or acceptance-rejection status.
  • Notify supervisors or other personnel of production problems.
  • Discard or reject products, materials, or equipment not meeting specifications.
  • Recommend necessary corrective actions, based on inspection results.

Delivery driver, Towne and Sons. Leschview, Louisiana
Nov. 2016 – Jan. 2017
Delivering pizza to customer in timely manner, making sure their order is correct, and they are satisfied with the service. In spare time, if not delivering food, help employees inside the store.
  • Measure ingredients required for specific food items being prepared.
  • Take food and drink orders and receive payment from customers.
  • Prepare specialty foods such as pizzas, chicken wings, sandwiches/subs, and salads, following specific methods that usually require short preparation time.
  • Read food order slips or receive verbal instructions as to food required by patron, and prepare and cook food according to instructions.
  • Cook the exact number of items ordered by each customer, working on several different orders simultaneously.
  • Prepare dough, following recipe.
  • Order and take delivery of supplies/food.

General Labor, Wunsch, Hackett and Vandervort. East Marquisstad, South Carolina
Apr. 2015 – Dec. 2015
Trim and Inspect automotive foam parts such as cup holders, arm rests, and center counsels. 
  • Inspect, test, and adjust/trim completed product to ensure that product meets the specifications, tolerances, and customer order requirements.

Quality Control, Kiehn-Kirlin. Adamsland, Arizona
Jul. 2012 – Aug. 2012
Quality control inspects the way the product looks, ingredients in product, and they do specific tests (repetitively)  in a timely manner. 
  • Inspect, test, and adjust completed product
  • Measure, examine, or test completed product to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
  • Separate scrap waste and related materials for reuse, recycling, or disposal. to ensure that product meets the specifications, tolerances, and customer order requirements.

Education

Eastern Kreiger Academy, Lake Hopeport, Idaho
High School Diploma, N/A, Aug. 2011

Personal info


Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Skills

Quality skills








Manufacturing/Production skills








Hard worker / Fast learner








2412670c-e9d4-4c31-a16b-d6638660bc9d

Andrew Smith

287 Custer Street, Hopewell, PA 00000
andrew_smith@example.com
(000) 000-0000

Professional Summary

Applicant with 10 years of manufacturing experience seeking role as a Filling Technician. Comprehensive knowledge of manufacturing equipment, setting up and operation of machines, as well as measuring equipment and hand tools. Familiarity with pharmaceutical and food industry regulations and procedures. Exceptional work ethics and ability to follow complex production procedures.

Employment history

Quality Inspector, Reynolds-Maggio. Adolfoberg, Alaska
Apr. 2018 – Present
  • Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers.
  • Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required.
  • Discard or reject products, materials, or equipment not meeting specifications.
  • Clean, maintain, calibrate, or repair measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
  • Remove defects, such as chips, burrs, or lap corroded or pitted surfaces.
  • Write test or inspection reports describing results, recommendations, or needed repairs.

Press Machine Operator, Renner Inc. East Gerrychester, Pennsylvania
Feb. 2017 – Jun. 2017
  • Set-up and operated mechanical and hydraulic press machine to make metal parts.
  • Monitor the feed and speed of machines during the machining process.
  • Read blueprints and specifications to ensure finished products meet customer expectations.
  • Operate small cranes as well as forklifts to transport or position large parts.
  • Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
  • Clean or sanitize work areas, equipment and machines.

Manufacturing Technician (Contract), Wolf Group. Port Jake, Delaware
Apr. 2016 – May. 2016
  • Set-up and operated vial washing machines, stack vials into containers and label the containers.
  • Packed bulk medicines after manufacturing, labeling and palletizing them for inspection and shipment.
  • Sanitized production areas according to Standard Operation Procedures.
  • Dissembled manufacturing equipment to sterilize and autoclave for the next operation.
  • Entered information into computer data base for record keeping.  

Machine Operator, Hoppe Group. Daliaton, North Carolina
Nov. 2015 – Feb. 2016
  • Set up and operated machine to make paper bag for the food industry.
  • Verify that paper and ink meet the specifications for a given job.
  • Change press plates, blankets, or cylinders, as required.
  • Obtain or mix inks and fill ink fountains.
  • Feed paper through press cylinders and adjust feed and tension controls.
  • Load presses with paper and make necessary adjustments, according to paper size.
  • Secure printing plates to printing units and adjust tolerances.
  • Clean ink fountains, plates, or printing unit cylinders when press runs are completed.
  • Adjust digital files to alter print elements, such as fonts, graphics, or color separations.
  • Clean or oil presses or make minor repairs, using hand tools.

Seafood Processor/Fuel Duck Technician, Kuhic, Crona and Reichel. Lake Jannet, Connecticut
Dec. 2014 – Apr. 2015
  • Operated tank farm to supply fuel to  the fishing boats as well as the city of Sand Point.
  • Conducted daily, weekly and monthly inspections to ensure no tank or pipe is leaking to avoid any oil on the sea surface.
  • Assisted the safety manager to inspect fire extinguisher, ammonia, drinking water, as well as safety training for new employees. 
  • Assisted production to process fish by cleaning, cutting, freezing, packing, and shipping. 

Education

Eastern North Dakota College, Genevieveshire, Idaho
Associate of Science, Humanities, Jan. 2014

Skills

Leadership
Beginner

Chemical handling
Skillful

Machining
Experienced

Quality Inspection
Experienced

Measuring Instruments
Experienced

Interpersonal Communication
Experienced

289dccae-9bbf-4023-a96d-d710b997e1cc

Andrew Smith


Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Highly-motivated focused professional with 5 years of experience as an assembly manufacturing and production process engineer.  Adept at identifying and implementing shop floor process optimization and control methods to eliminate turn-backs to reduce overall assembly costs.  Consistently participates in lean manufacturing and continuous improvement initiatives.  Strong project engineering and planning skills with keen ability to multi-task in a fast-paced, results-driven environment.

Employment history

Aug. 2019 – Present
South Rollandberg, Hawaii
Press Operator, Smitham-Rice

perform assigned task in timely matter , 

Quality inspection of various stock before shipment

provide quality production using standard production tools 

Provide oversight of product to customers

Mar. 2017 – Apr. 2017
New Derektown, Minnesota
Quality Inspector, Shanahan, Dach and Lockman

Developed, implemented and monitored programs to maximize customer satisfaction. 
Provided a high level of product and leadership support to representatives and clients. 
Effectively communicated with team members to maintain clearly defined expectations. 
Generated and distributed daily reports and order acknowledgments to appropriate personnel. 
Provided inspection of various parts to ensure quality service
Conducted data-logs of every part inspected to ensure accuracy

Apr. 2016 – Jun. 2016
Normandside, South Carolina
Production Worker, Kirlin and Sons

Supervised material flow, storage and global order fulfillment. 
Maintained accurate stock records and schedules. 
Unloaded, picked, staged and loaded products for shipping. 
Received incoming shipments and reviewed contents against purchase order for accuracy. 
Worked at a rapid pace to meet tight deadlines. 
Verified and recorded the count and condition of cargo received. 
Verified and recorded the count and condition of cargo received. 

Feb. 2016 – Mar. 2016
Ricardofurt, Maryland
Production worker ,Press Operator, Cruickshank, Wisozk and Koepp

Maintained correct temperature, levels and pressures on process systems and equipment. 
Directed routine preventative maintenance such as adjustments, cleaning and painting equipment. 
Completed daily task in efficient and timely matter.
Ensured that product was up to quality exception before shipment
Maintained clean work environment for product testing

Education

Present
Associate of Science: Information Technology

  • The Leuschke Academy – East Vaughn, Massachusetts

Skills

Computer Technology
Skillful

Customer Service
Experienced

Brake Press
Beginner

8d58f7f4-b1e7-4926-bd40-3db4a719a2fb

Andrew Smith


Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Hi, I’m the one you are looking for. I am very efficient, productive and get get the job done. I always lend hands in other departments to put in team effort, along with learning new things is my area. I give my best and along with my hardest effort at anything I learn, do or try. I think i would be a great canidate for your company as for you need more workers like me. 

Employment history

Jun. 2018 – Present
Lylestad, Arizona
Quality inspector, Part Puller, Shipping Assistant, Considine, Emard and Nikolaus

  • Attach identifying tags to containers or mark them with identifying information.
  • Read work orders or receive oral instructions to determine work assignments or material or equipment needs.
  • Assemble product containers or crates, using hand tools and precut lumber.
  • Record numbers of units handled or moved, using daily production sheets or work tickets.
  • Sort cargo before loading and unloading.
  • Move freight, stock, or other materials to and from storage or production areas, loading docks, delivery vehicles, ships, or containers, by hand or using trucks, tractors, or other equipment.
  • Maintain equipment storage areas to ensure that inventory is protected.
  • Stack cargo in locations such as transit sheds or in holds of ships as directed, using pallets or cargo boards.

Dec. 2014 – Jan. 2015
South Tiesha, Massachusetts
Parts puller, Maitnence Janitor, Goyette, Kreiger and Stoltenberg

  • Measure, weigh, and count products and materials.
  • Mark and label containers, container tags, or products, using marking tools.
  • Record product, packaging, and order information on specified forms and records.
  • Place or pour products or materials into containers, using hand tools and equipment, or fill containers from spouts or chutes.
  • Clean containers, materials, supplies, or work areas, using cleaning solutions and hand tools.
  • Clean and maintain supplies, tools, equipment, and storage areas in order to ensure compliance with safety regulations.

Apr. 2011 – Jul. 2011
Port Billye, Kansas
Housekeeper/Janitor, Gusikowski and Sons

  • Clean rooms, hallways, lobbies, lounges, restrooms, corridors, elevators, stairways, locker rooms, and other work areas so that health standards are met.
  • Disinfect equipment and supplies, using germicides or steam-operated sterilizers.
  • Wash dishes and clean kitchens, cooking utensils, and silverware.
  • Empty wastebaskets, empty and clean ashtrays, and transport other trash and waste to disposal areas.
  • Clean rugs, carpets, upholstered furniture, and draperies, using vacuum cleaners and shampooers.
  • Dust and polish furniture and equipment.
  • Wash windows, walls, ceilings, and woodwork, waxing and polishing as necessary.
  • Sweep, scrub, wax, or polish floors, using brooms, mops, or powered scrubbing and waxing machines.
  • Assign duties to other staff and give instructions regarding work methods and routines.

Education

Dec. 2002
Assistant Manager, Secretarial Assistant

  • Southern Simonis University – Weimannburgh, Tennessee

Dec. 1996
High School Diploma: Basic and General Knowledge

  • Southern Bednar Academy – New Del, New Mexico

Skills

Team Leader
Experienced

Shipping Assistant
Skillful

Production Worker
Expert

quality inspector

  • Assist drafters in developing the structural design of products using drafting tools or computer-assisted design like Autocad, Ansys or drafting equipment and software.
  • Quality Inspection of Production material ensuring good Quality products.

quality inspector

  • Inspection of all type of crankshafts.
  • Executed technical inspections through a micro view machine   
  • Prepared visual inspection of the Vials, Syringes and blood tubes.
  • Documented inspections performance in Microsoft word and Micro Excel 

quality inspector

  • Listen to customer requests, referring to alphabetical or geographical directories to answer questions and provi
  • Resolve customer complaints or answer customers’ questions regarding policies and procedures.de telephone information.
  • Obey and complete the job or directions given by the Team lead or Project Supervisor. 
  • Take control of team when left in charge as if I were a team lead

quality inspector

  • Calipers
  • Pin Gauges
  • Digital Torque Wrenches
  • Thickness Gauges
  • Geometric Fixtures

quality inspector

  • Performed last piece and first piece approvals and hourly checks on the production floor measuring dimensions of products to verify conformance to specifications, using various tools, such as calipers, gauges and micrometers. 
  • Tested and verified raw materials, purchased components, in-process samples, and finished goods met established testing and inspection standards prior to shipping. 
  • Notified operators and supervisors of quality issues, and assisted in identifying and correcting problems. 
  • Documented, filed and maintained proper inspection records and quality assurance documents. 
  • Implemented several time saving and beneficial changes including improving and reorganizing the quality documents filing and a gauge logging and check out system.

quality inspector

  • Inspected and identified defects mislaid from assembly before shipping to customers.
  • Cooperated with staff from assemblers to engineers to ensure production is within acceptable parameters for customers.
  • Performed daily audits to maintain structured and accurate workflow on the assembly floor from the molding department to outgoing dock.
  • Assist inspector duties as needed.

quality inspector

  • Responsible for assuring that manufacturers items are made correctly.
  • Make sure good assembled parts are shipped from the company.
  • Inspected brake rotors, fist callipers (left and right), knuckles, coil springs according to the criteria and report it to the supervisor.
  • Inspected Mustang Engines and measuring it’s hardness.
  • Inspected front rail and back rail at MYTOX company.
  • Inspected some car seating parts at Magna International Inc.
  • Applied Lean manufacturing tools and Statistical Quality control tools for continuous improvement.

quality inspector

  • To make sure all product being produced, is correct by following Paktech’s quality requirements and are being performed per established standards, specifications and procedures.
  • Collection of relative data for documenting and tracking of jobs running.
  • Part dimensional analysis.
  • Verification of UPC and Deco labels being applied.
  • 100% box inspections (as designated) for conformance to standards.
  • Placing of non-conformance product and materials on hold along with initiating Nonconformance Reports.
  • Maintenance of sample bins for accuracy and availability.

quality inspector

  • Inspect incoming Samsung products. 
  • Revise cellphones, tablets, computers, televisions.
  • Revise each box before shipped out to client. 
  • Check up on new employees to ensure they knew the quality standards. 
  • Data entry of production.
  • Order picking.
  • Creating shipping labels. 

quality inspector

  • Works closely with Production and Quality Management to resolve significant Quality issues in a timely manner which may require real-time and/or follow up activities.
  • Authorized to place in “Block Status” production operations when situations warrant and recommends remediation activities.
  • Ensures quality activities are performed in conformance to requirements following GMPs, SOPs and customer requirements.
  • Perform inspections to production lines to ensure the production is being performed as per requirements.
  • Record inspection in the Quality Supervisor Checklist and trend issues in the Quality report
  • Monitor the adherence to Validation, Qualification and Trial Protocols
  • Support Shipping and Receiving Inspectors

quality inspector

  • Read blueprints and instructions to comprehend the quality expectations for the product. 
  • Select and check product using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.)
  • Maintain records of testing, information and various metrics such as number of defective products per day etc.
  • Inspect procedures of the production cycle to ensure they are efficient and comply with safety standards.

quality inspector

  • Approves finished products by confirming specifications;conducting visual and measurement tests;returning products for re-work;confirming re-work.
  • Documents inspection results by completing written reports and logs;inputting data into quality database.
  • Ability to read and understand engineering drawings.
  • Ability to multitask and prioritize the work accordingly to meet all the deadlines.

quality inspector

  • Measure and examine completed products or test incoming product to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers.
  • Measure dimensions of incoming products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers.
  • Part of a Kata team to improve receiving process of Kentucky paper, Lawrence paper and Binaurals.
  • Measure dimensions with a variety of measuring equipment.

quality inspector

  • Perform first piece, in-process, and last piece checks on the various components of hydraulic and pneumatic cylinders.
  • Inspect incoming raw material, purchased components, and operations performed by outside vendors.
  • Inspect and test finished cylinders for conformance prior to shipping.
  • Monitor and verify operators’ adherence to standards of in-process quality documentation and daily maintenance of machines.

quality inspector

  • Inspect, test, and adjust completed units to ensure that meet specifications, tolerances, and customer order requirements.
  • Measure dimensions of products to verify conformance to specifications, using measuring instruments such as calipers, gauges, or micrometers.
  • Conducted material inspections of incoming gas caps and brakes.
  • Conducted routine visual inspections of the outside of the car to cover issues with the paint job.

quality inspector

  • Perform product testing activities on car lamps throughout production cycles.
  • Monitor performance of quality control systems to ensure efficiency.
  • Direct causes of defects, test results, or other regular reported control data.
  • Document testing procedures.

quality inspector

  • Report to daily Job Assignment. 
  • Job Assignment could be anywhere in a 50 mile radius. 
  • When reporting to Client (Factory) report to head of Quality. Receive sort details.
  • Fill out daily billing information for client and fax to Corporate. 
  • Be sure the follow rules of client factory. 

quality inspector

  • To  manage quality of each and every part that came out of molding machines.
  • Inspection of each molding machines in every 2 hour.
  • Managing In-Process quality report.
  • Making of FPA and LPA report.
  • Place each and every part of document of as per filling system.

quality inspector

  • Check parts visually and statistically as per customer requirement with ISO/TS16949 quality standards
  • Perform visual inspections, mechanical and functional verification of parts by following specific work instructions and prepared documentation
  • Tag and isolate defective material as a part of Kanban and provide justification for defective material
  • Effectively communicate with supervisor to mitigate problems, worked in the time-bound situation, achieved daily targets and was able to increase part supply rate by 20% than usual

quality inspector / lead tech

  • Process Inspection of material
  • Defect reports
  • Utility functions (loading and unloading machine)
  • Perform lead duties (breaks, setting machines, etc)

quality inspector

  • Quality Inspection for the auto-motive parts of TESLA.
  • Worked with the team members their and got involved in the atmosphere of the new state.
  • Understood the way of communication and working with new people.
  • Inspect, test, or measure materials or products being production

quality inspector

  • Inspects and measures automobile parts being manufactured by the client company and eliminating those who have major defects, resulting in high-quality standards according to ISO
  • Uses precise metrology tools such as Vernier calipers, Micro-meter screw, Depth-gauge, Height gauge and Go/no-go gauge to ensure specifications according to the given CAD blueprint
  • Generates incoming part reports, corrective action reports, final material reports, and quality checked certifications
  • Entering inspection results into a database.