quality engineer Archives

Helped increased production by almost 70% keeping quality of product in mind.
Work with internal employees to improve the quality process.
Work with external suppliers to improve quality standards and processes.
Achieved a target of 5000 MVA output within 3 months period.
Ensure product and process quality targets are met by working with engineers of various department and giving feedback wherever required.
Identifying root causes of defects for in-process rejections/customer complaints and implement corrective and preventive actions.
In-process inspections in various stages.

Formulated mathematical models or other methods of computer analysis to develop, evaluate, or modify design, according to customer engineering requirements.
Measured & tested Electro-Medical equipment as mentioned in ISO-13485 and ISO-17025.
Found Bugs and made reports while testing software/ sensor based products.
Handled customer complaints and scrutinised with records.

Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.
Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site
Manage new peojects.
Working in Cross Functional Teams

Leads complaint investigations, failure analysis of returned products and determines whether to stop ship/stop production.
Resolves quality issues by identifying problems, examining solution options, implementing action plans and providing resources.
Institutes quality metrics to be discussed at QIT meetings and implements corrective measures.
Participates in the Advanced Product Quality Planning meetings to review existing quality assurance systems and implements procedural revisions when deemed necessary.

Understanding products, their manufacturing process, specifications and use
Applying the QMS and related procedures
Part approval, development and localization
Defect analysis, containment, corrective action validation and documenting on 8D report
Working knowledge of APQP, 6Sigma and Lean Manufacturing techniques
Checking fixture and rework gauge design
Detecting potential quality concerns and implementing preventative measures

Verifying the process (product parameters &process parameters.
Inspect, test, or measure materials, products, or work for conformance to specifications.
Verify containment & preventive action about customer complaints.
Presentation of monthly review meeting on PPT slides.
Maintaining manpower attrition record, attendance on ERP, and overall month wise and day wise rejection data.
Review reports submitted by junior members to recommend approval or to suggest changes.
Strive for new business.

Developed suppliers processes to conform to incoming inspection requirements.
Supported the Quality Management System for:Supplier Selection and Controls
Corrective and Preventive Action System – helped to administrate the CAPA system and coordinate CAPA Review Board activities
Review customer complaints on product for manufacturing process improvements

Responsibility to check and inspect the incoming Raw materials with respect to the Purchase Order.
Responsibility to check the raw materials with Material Certificate by the supplier.
Responsibility to inspect the fabricated product with respect Design drawing that approved by customer.
Role of checking the quality control plan from Raw materials to Final products.
Role of inspecting the welding and gas cutting process as per the drawing.
Responsibility to maintain the inspecting instruments calibration.

Develop, coordinate, or monitor all aspects of quality, including selection of manufacturing methods, fabrication, or operation of product designs.
Responsible for Process Audit, Red Bin analysis and customer requirements to meet specific standards.
Evaluate product data and design from inspections and reports for conformance to quality standards.
Conduct research that tests or analyzes the feasibility, design, operation, or performance of equipment, components, or systems

A quality engineer is responsible for making sure that engineering and manufacturing processes are performed correctly using the right tools, materials and processes. An important part of the job involves designing the company’s quality standards and testing processes against those criteria
Planned, coordinated and validated mantaince of polyurethane reactor equipment.
Performed Incoming Inspection.
Audited application of polyurethane applied by aspersion.

As an Electronics engineer maintenance and monitoring of various project.
R&D in projects according in customer requirement.
Testing Sensors, PCBs, Connectors, Power Supplies and Signal Conditioners.
Final designing in PCB & instrument.
Fault finding in PCB and machine.
Calibration of all equipment as per requirement and jig.

Work monitoring, testing and inspecting products to make sure they meet specified standards.
Coordinate with suppliers and customers relating to quality trends, performance and corrective action.
Customer Complaint Handling & reporting to top management if their is any change in plan.
complaints/rejections from in-house & customers end find out by using why-why analysis.
Maintain quality related documents.(ex. quality report,control chart etc. )

General oversight and quality control under Building Services (HVAC and lighting)
Management of material flow (follow up on issuance and inventory)
Ensure security of materials and incident reporting in the line of responsibilities
Under Siemens quality control policies, lead subcontractor teams (Chinese and local engineers and technicians) and guide them through;

Regularly report product quality
Also knowledge in programming for CNC Waterjet Germany Machine.
Hand full of experience in operating CNC Waterjet Germany Machine and also shutdown maintenance, troubleshooting.
Train new team members in the application overview and automation framework.

Technical assistance for making hydraulic valve properly and correctly functioned and to solve problems related to it.
Look after various machining processes like drilling,turning,facing,boring,counter boring etc and to analyze,equate & record accurate dimension with proper measuring instrument and to ensure its dimension with tolerance implicate with given standard
Provide guidance regarding selection of material,critical components & alternate sources.
To look after proper testing, operation & function of hydraulic valve.
Checking and analyzing quality & types of material used that matches the client requirement.
To handle client arrived for inspection of valves and verifying and submitting of documents to client.
To maintain relationship and regular follow up with the client.

Design test plans, scenarios, scripts, and test procedures.
Perform sanity, smoke, regression, exploratory and accessibility testing for different modules of the project.
Defect Reporting and Tracking in Github
Map test cases in GTP
Automate new features of the product using the Protractor framework, achieved a 60% reduction in time required for testing a module through automation.
Identify gaps in different scenarios and automate it.
Ensure the stability of remote runners.

Monitoring long term process capability and facilitate process improvements.
Good experience in drawing study and GD&T measurements.
Handling of different instruments: Level 1 inspection, CAD model to part comparison. MSA study for gauges.
Knowledge on procurement of instruments, monitoring of calibration records and recall of instruments for timely calibration.

Analysis of customer complaints and preparing 8D for the same.
Quality representative in concurrent engineering team.
Conducted product and process internal audits and faced QMS audits from “Airbus and Boeing”.
Review and implementing customer specific requirements, changes in internals SOP’s and control of rev changes.

Involvement in Preparation of Test Procedures, Test Scenarios, Cases and Test Data.
Involved in Automation Infrastructure Development using Selenium.
Created Test Cases Using Element locators and Selenium Web driver methods.
Enhanced Test cases using Java programming features and TestNG Annotations.
Execution of Selenium Test cases and Reporting defects.
Responsible for GUI and Functional Testing, using Black Box Testing Techniques.
Involvement in Test Execution, Results Analyzing and Defect Reporting

Conducted training for 38 associates on clear understanding of assembly drawing, LP sheet and BOM sheet and 6 Engineers on rca methodolgy.
Lead for the implementation of SPC at various work station for control monitoring of key characteristics.
MRB review in quality clinic and providing CAPA for internal Non- Conformance, and ensuring there is no repetitive NCRs.
Rejection,COPQ and rework analysis and escalation to top management.

Working as quality control and methoods engineer from intake to output with all process implementation.
FAI Document prepartion and verification, identification of key characterstics as per customer requirement.
NPD with all the process implementation and reducing cycle time.
Inspection and process implementation of all the critical parts and major assembly.
Good knowledge on machining process.
Competitive problem analysis and solution.
Developed SOP’s and WI’s.

Study of Isometric Drawing.
Preparation of Bill of Material (BOM)
Fabrication of piping spool and supports in prefabrication shop.
Conducting the welder qualification test.
Installation of prefabricating piping spools and supports in module.
Conduct NDT (RT/UT/MPT/PT) for shop weld and field weld.
Carry out visual inspection for fillup and welding of pipe spools fabricated in the workshop and onsite plan the activities for the NDT.

Performed quality inspections and drafted reports to detail non-conforming material issues.
Identified problems and recommended new processes to improve efficiency .
Daily visual Inspections of Raw Materials and s.s pipes and also then check by micrometer and vernier Callipers also.
Resolves quality issues by identifying problems, examining solution options, implementing action plans and providing resources.

Determine quality improvement parameters by identifying statistical methods relevant to manufacturing processes.
Establish statistical reliability by using mean load before failure and reliability demonstration tests.
Perform visual inspection and laboratory tests for the corrugated boxes.
Package design using CREO and prepare reports by collecting, analyzing and summarizing data and make necessary recommendations.
Contribute to the team by accomplishing related results as needed.
Responsible for shop floor analysis to improvise productivity and to reduce rejection rate of products through creative solutions.

Inspecting the process from dough mixing to baking for ensuring the optimum quality parameters
Checking the sealing and batch number on packed biscuits before releasing the furnished biscuits in market
Approving the laboratory results,usage decision,pre-dispatch inspection through System application and processing(SAP).
Designed and implemented a quality system from scratch that follows a product from order to delivery.

Direct or coordinate manufacturing, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, Standards, or customer requirements.
Responsible for all Quality Management activities in the engine assembly department including documentation and system work.
Maintaining the Documentation of various supply orders and uploading the status on a weekly basis
Auditing of various Sub-assemblies and assemblies as per the documented procedure.

Supervises 10 employees in the Quality Operations division
Leads complaint investigations, failure analysis of returned products and determines whether to stop ship/stop production
Resolves quality issues by identifying problems, examining solution options, implementing action plans and providing resources
Institutes quality metrics to be discussed at QIT meetings and implements corrective measures
Participates in the Advanced Product Quality Planning meetings to review existing quality assurance systems and implements procedural revisions when deemed necessary
Coordinates with Sales, Purchasing, and Production department heads to resolve customer complaints and provide status updates on corrective actions taken

CNC, VMC machining workshop.
perform periodical quality check.
Root cause analysis on rejected material.
Maintain notes & drawings for future reference.

Liaises with client & customer for pre-inspection meetings and formulating the ways of inspection with the approved test plan.
Inspection of the materials in the in-process stage concerning visual, dimensional and orientation compliance as per the approved drawings and specifications
Familiar with most of the Welding Processes like SMAW, GTAW for T22, T23, T91/P91, etc
Experienced in various Non-destructive inspection techniques following ASME Sec V like UT, RT,VT, DPT & MPT.
Coordinates with the Execution & safety department to resolve customer complaints and
provide status updates on corrective actions taken.
Interpretation of the Radiography films as per the approved procedures.

Responsible for quality control during production by monitoring the process & discovering the process abnormals.
Establishing and improving processes, regulations, guidelines, standards, and checklist to prevent the occurrence of the problem.
Responsible for review, verification, and confirmation of the introduction & change of manufacturing process.
To update process quality planning guidelines for PQC, AQC to complete quality process supervision of finished product.
Responsible for handling complaints about market issues, follow up the improvement on the related issue.