687309e2-8799-4f31-85d5-d78f5c8c5558

Andrew Smith

287 Custer Street, Hopewell, PA 00000
andrew_smith@example.com
(000) 000-0000

Professional Summary

Over the past 10 years, I have been a Boilermaker, Pipefitter, Foreman, a QC Tech, and a Site QA/QC Manager. During that time, I was very detail oriented, attentive, and thorough while completing each task. I have continued to practice those principles while striving to further advance my skills and knowledge in the field. Most of my career I have worked for Turner Industries. I have also worked for Performance Contractors and River Construction.

Employment history

QC INSPECTOR, Rau-Frami. Jimmieside, New Jersey
Sep. 2019 – Oct. 2019
  • Created drawings, built weld packages and submitted completed packages to the client.
  • Utilized visual inspection techniques as well as performing detailed measurements with handheld tools and devices.
  • Established relationships with the client, contractors, and projects team.
  • Inspected welds visually and by using the liquid penetration method.
  • Inspected Flange Connections and bolt torque. 
  • Walked down jobs and created punch list for items not complete.
  • Organized NDE to be done by submitting request and verifying location with NDE inspectors.
  • Walked down blind list verifying all blinds have been installed and bolts were tight.
  • updated Weld Tracker daily along with all QC packages.  

Site QC manager, Fadel Group. West Hollie, South Carolina
Feb. 2019 – Jun. 2019
  • Proposed and implemented improvements to reduce errors and rejected items. 
  • Documented findings and generated reports with data and recommendations. 
  • Utilized visual inspection techniques as well as performing detailed measurements with handheld tools and devices. 
  • Inspected products, components and materials for defects and compliance with tolerance standards. 
  • Created drawings, built weld packages and submitted completed packages to the client. 
  • Established relationships with the client, contractors, and projects team. Maintained welder certification records, welder continuity, stencil logs, WPS-PQR, weld mapping, daily weld reports, site specifications, monthly reports, ASME code work, nonconformance reports, exc. 
  • Reviewed weekly schedules with planning group along with X-Ray group to ensure no conflicts would occur and all NDE would be done in an orderly fashion. 
  • Conducted rod room audits weekly, shop safety audits daily, and documentation audits regularly. 
  • Attended all meetings in reference with site improvements, communication, and safety concerns. 
  • Interpreted the code and standards for PSM areas to ensured the correct specification and materials were being used. 
  • Controlled the welder certification process and maintained welder orientation company guidelines. 
  • Helped to improve the efficiency of the QC program.

Boilermaker/Pipefitter, Welch Inc. East Alica, Louisiana
Aug. 2018 – Sep. 2018
  • Disassembled and reassembled many reactor heads/lids. 
  • Organized proper materials to be used and staged them near the equipment for easy access. 
  • Rigged large valves and flagged the crane while crew members performed the bolting process. 
  • Assisted QC in verifying all work was inspected and coordinated with crew members if any unsatisfactory work was found.

Boilermaker/Pipefitter, Graham, Moore and Gerhold. North Enrique, Indiana
Jul. 2018 – Aug. 2018
  • Installed new support beams on a Hydrogen skid.

Pipefitter, Schumm and Sons. West Renitaport, Massachusetts
Jun. 2018 – Jul. 2018
  • Cut, threaded, and installed piping for new eyewash stations. 
  • Hydro tested the whole system when job was complete.

Pipefitter Forman, Pacocha, Steuber and Runolfsdottir. O'Connerview, South Dakota
Mar. 2018 – Apr. 2018
  • Oversaw the installation of new FRP piping in the cell house for the chlorine unit. 
  • Focused on the safety of my pipe fitters, boilermakers, riggers and operators along with coordinating with other other groups in the area.
  • Practiced proper communication, listened to the concerns of the workers and solved any problems that arose.

Boilermaker/Pipefitter, Kemmer, Emard and Glover. Adelaidatown, Montana
Jun. 2017 – Dec. 2017
  • During this project, me and my coworkers disassembled an entire Gas-Oil unit. 
  • Tunneled and removed manways from several towers. 
  • Fabricated new supports for header tubes. 
  • Fabricated new natural gas piping for heater burners. 
  • Extracted CFE bundles. 
  • Assisted operator in flushing piping and equipment with soda ash. 
  • Hydro tested piping throughout unit. 
  • Welded new hardware in combination tower.

Pipefitter, Lehner, Jakubowski and Lemke. North Dominicashire, Oklahoma
Feb. 2017 – Mar. 2017
  • Took measurements, created isometric drawings, cut, prepped and fit butt welds and socket welds for Hydrobon unit. 
  • Assisted QC by reviewing all welds daily with him.

Boilermaker, Gleason Group. North Tommyburgh, West Virginia
Jun. 2016 – Jul. 2016
  • Fabricated and installed piping for new unit. 
  • Fabricated and installed new supports for piping.

Boilermaker, Ziemann-Bartell. Moenbury, Mississippi
Jan. 2016 – Feb. 2016
  • Removed and installed fin fan plugs. 
  • Inspected tower manways, valves, CFE’s, and various piping for gasket and hardware correctness.

QC INSPECTOR, Kemmer Group. South Juliusberg, Washington
Sep. 2015 – Oct. 2015
  • Package runner for QC department. 
  • Built mechanical packages for chlorine unit. 
  • Visually inspected bolt-ups throughout unit for proper gasket, flange alignment, and proper hardware. 
  • Checked bolts for tightness using a ping hammer. 
  • Interpreted packet specifications to assure torquing procedure was done correctly. 
  • Witnessed torquing procedure on all required flanges. 
  • Filed paperwork through third part inspectors.

Pipefitter, Bergstrom-Kuhic. Clementefurt, North Carolina
May. 2015 – Jul. 2015
  • Cut, prepped, and fit pipe for new exchanger system.

Education

Northern Bradtke University, Frankburgh, South Dakota
High School Diploma, General, Dec. 2010

Skills

Ability to multi task

Familiar with B31.3 and ASME section VIII

Ability to read and interpret code books

Focused on the task at hand while efficiently completing projects on tim

Experienced in fabricating piping systems with saddles, dummy legs, rolling offsets, and supports

Ability to interpret P&ID drawings

Ability to create and interpret isometric drawings

Highly skilled and experienced pipefitter

Extensive experience in tunneling towers and installing tower trays

Quality craftsmanship in completing mechanical bolt-ups

Certifications

qc inspector

  • Perform incoming, process and final inspection as per ISO and IPC requirements to enforce Quality Assurance. 
  • Work with Quality Control Engineer in diagnostics and finding remedies following schematics, procedures, standards and sequences to monitor and verify quality in accordance with statistical process or other control procedures.

qc inspector

  •  Conducted inspections of Engine parts before fabrication .
  •  Attending pre-inspection meetings to discuss procedures,conditions   of inspection,examination or test and communication to perform   effectively required inspection,test.
  •  Evaluated components and final products against quality standards   and manufacturing specifications 
  • Communicated with production team members about specific quality issues such as Blow hole,crack,machine damage,variation in inner and outer diameter.
  • Provided quality assurance from every stage of product development process from manufacturing to packaging .

qc inspector

  • Provided day to day work directions as required for the inspection of new or existing facilities.
  • Checked work performed conforms with Saudi Aramco Engineering Standard (SAES) and monitored the implementation of project.
  • Reviewed drawings to determine if the design within the client requirements.
  • Planed, scheduled, coordinated and provided work directions with the subcontractors.
  • RTU installation, CCTV configuration and link test between wells.
  • Supported commission team.

qc inspector ( onshore fabrication )

  • Supervised welding activities performed by welders.
  • Performed visual inspection as well as preparing inspection report on finished products.
  • Liaised with clients to clarify the requirement and criteria for inspection.
  • Inspected fabrication on structural and pipe 

qc inspector ( onshore fabrication )

  • Performed piping and structural fit-up and visual inspection.
  • Assisted Welding Engineer in constructing welding procedure and conducting PQR.
  • Liaised with Inspector from client side and Third Party Inspector for WQT, PQR and mechanical testing.
  • Inspect incoming material as per material certificate with regards to their personal appearance and condition.

qc inspector

  • Performs Quality Control Inspection.
  • Evalualuate and Organize Quality System dDcumentation
  • Read blueprints. Analize and aplique drawins  requeriments in varios inspection and test situations..
  • Determine samples size, selection method and accept/rejet criteria for especfic situations. 
  • Use relative termand concepts such as AQL, lot sise , sample size acceptance number, switching rules  , sampling plans, zero-defectsamplies, etc.
  •  Aplique calibration Procedures , gage treaceability , calibration status report and discrpantias, etc.

qc inspector, aoi machiene operator

  • Assembles  y Sub Assembles components with hand and power tools.
  • Interpreter blueprints ands drawings and sketches.
  • Completed and entered quality record, scraps and record machine logs in a timely manner.
  • Inspection, tested and measured materials , products and installation to specifications.
  • AOI Machine operation in proses  and finish circuits boards    

qc inspector

  • Set up and calibrate nondestructive testing equipment.
  • Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection.
  • Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations.
  • Apply testing criteria in accordance with applicable specifications or standards and evaluate results.
  • Organize and report test results.
  • Perform specialized inspections.
  • May instruct and supervise others.

qc inspector

  • Inspect, test or measures materials or products being produced
  • Measure products with rulers, callipers, gauges, or micrometers
  • Walked down blind list verifying all blinds have been installed and bolts were tight.
  • updated Weld Tracker daily along with all QC packages.  

qc inspector

  •  Make sure that all works going save according to HSE Advisor.
  •  Checking the pipe and electrodes before starting weld.
  •  Checking the joint alignment and pipe dimension.
  •  Carry out visual inspection of the welded joint (Including dimensional aspect).
  •  Identify repairs from assessment of visual or NDT reports.
  •  Preparation Daily Fit-up, Weld Visual Reports and Inspection Checklists.
  •  Inspection of Painting, Sandblasting, and coating.

qc inspector

  • Created drawings, built weld packages and submitted completed packages to the client.
  • Utilized visual inspection techniques as well as performing detailed measurements with handheld tools and devices.
  • Established relationships with the client, contractors, and projects team.
  • Inspected welds visually and by using the liquid penetration method.
  • Inspected Flange Connections and bolt torque. 
  • Walked down jobs and created punch list for items not complete.
  • Organized NDE to be done by submitting request and verifying location with NDE inspectors.

qc inspector ( onshore erection and installation )

  • Assisted Test Package Engineer in reviewing test packs before releasing test pack with a relevant document for site testing.
  • Performed inspection for pressure testing (hydro-test, pneumatic test, and service test).
  • Monitored reinstatement work done by sub-contractors.
  • Monitored and supervised contractors and sub-contractors on insulation activities.
  • Prepared relevant report on daily inspection activities

qc inspector

  • Inspect, test, or measure materials or products being produced.
  • Read blueprints and specifications
  • Monitor operations to ensure that they meet production standards 
  •  Accept or reject finished items

qc inspector ( onshore erection and installation )

  • Performed piping fit-up and visual inspection.
  • Prepared necessary documents and quality inspection reports such as punch list.
  • Coordinate with construction testing team and QC department in the preparation of testing activity based on test pack.
  • Performed inspection for pressure testing.

qc inspector

  • inspect the quality of drip tape to enure the customers are receiving  quality product
  • teach the operators what defects they should be looking for
  • communicate between each department
  • Ukur dimensi produk untuk mengesahkan kesesuaian dengan spesifikasi, menggunakan ukur alat seperti penguasa, calipers, tolok, atau mikrometer. Semak bahan-bahan yang akan tiba untuk memastikan mereka memenuhi pesanan pembelian, mengemukakan laporan percanggahan yang diperlukan.

qc inspector

  • Dimensional Inspection of Internal Trays and Ring Levelness, down comers.
  • Inspection of Pre-assembly, Alignment and installation static & rotating equipment. Installation of trays in towers and drums, valve tray, alignment and installation of pumps, Preservation of Static and Rotary Equipment’s.
  • Inspection and Responsible to run the material preservation program at job site for all type of equipment’s during storage, Construction and Commissioning stages.
  • Receive the RFI from the discipline staff and carry out the inspection as per ITP, Identify any discrepancies and generate the Non-conformance report (NCR).Raising and closing NCR, CAR and PAR (Preventive Action Request) in conjunction with QC Team.
  •  Prepare QC documents for MCD (Mechanical Completion document) for review by the QC Coordinator, which is finally handed over to the client.
  • Check and carry out inspection site welding activities.

qc inspector / welder

  • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
  • Responsible for the in process Technical Inspection regarding Quality Aspects & ensure the conformity of the Products.
  • Provide suggestions in implementing and setting Quality Standards. Dealing with man power regarding Quality Standards of Products. Controlling unnecessary Wastage of Material.
  • Responsible for taking all the data of the products.

qc inspector

  • Package runner for QC department. 
  • Built mechanical packages for chlorine unit. 
  • Visually inspected bolt-ups throughout unit for proper gasket, flange alignment, and proper hardware. 
  • Checked bolts for tightness using a ping hammer. 
  • Interpreted packet specifications to assure torquing procedure was done correctly. 
  • Witnessed torquing procedure on all required flanges. 
  • Filed paperwork through third part inspectors.

qc inspector

  • Performed Visual Inspection of welds and materials
  • Inspected fabrication on structural and pipe
  •  Witnesses and sign off on hydrostatic testing of piping
  • Inspection and flagging of welds for NDE 
  • Coordinated NDE 
  • Recorded details on observations and submitted to the authority
  • Maintained all document updated