• To ensure to perform QA inspection with passing results where QA to highlight any discrepancy caught. 
• Ensure that lots undergone shipment clearance must be transacted in the system both on SAP and via PROMIS and ACC chop should be carried prior shipment release. 
• Completed production targets within deadlines. 
• Provided suggestions to the team supervisor to raise the output of the team as a whole. 
• Packaged materials and items according to specified standards. 
•  Monitored departmental inventory. 
•  Maintained a clean and organized work area. 

• Heat Treatment Process Qualification and Control.
• In Charge for Laboratory and Quality Assurance Activities, Raw Material inspection, in process inspections and Final Inspection.
• Calibration and maintenance of laboratory equipment’s. ISO Documentation, preparation and control Project Document Preparation execution and Implementation.
•  Internal Audit, Supplier Audits

• Remove coating on item to be tested by using power tool. 
• Carry out visual inspection of the welded joint (Including dimensional aspect)
• Identify repairs from assessment of visual or NDT reports.
• Checking inside the towers and make sure that installation of trays is according to the planned.

• Adapt teaching methods and instructional materials to meet agent
• Establish and enforce rules for behavior and procedures for maintaining order among the Agent
• Provide a variety of materials and resources for Agent to explore, manipulate, and use, both in learning activities and in imaginative role play.
• Observe and evaluate Agent performance, behavior for whom they are responsible.

• Keeping the store, bathrooms, and parking lots clean 
• Collect trash
• Visual Inspection / Load Testing / MPI.
• Make preparation and operate functional test.

• Check Drawing (correct revision)
• Check welding procedure specification and welder approval
• Check welding equipment and all related ancillaries (cable, regulator, oven, quiver etc).
• Check pipe / plate and welding consumable for size, condition, specification & storage.
• Correct preparation (Relevant bevel angles, root face, root gap, root radius, land etc.)
• Correct level & method of pre heat applied prior to tack welding.
• Welding process and all related variable parameter (Voltage, ampere, travel speed, etc)

• Interpret specifications, blueprints, and company policies and procedures for workers.
• Determine standards, production goals, and rates, based on company policies, equipment and labor availability, and workloads.
• Enforce safety and sanitation regulations. based on company policies, equipment and labor availability, and workloads.
• Ensure that product standards consistently followed by production worker & inspectors.

• Prepared RFA submissions for QA/QC Inspections. 
• Inspected the site and checked different stages of work completion as per the specifications and method statements.
• Support document collection and preparation for NCR closing procedures.
• Support document collection and preparation for SOR closing procedures.
• Prepared the concrete pouring plans for the particular day.

• Interprets Engineering drawings, schematic diagrams, or formulas to apply quality standards. 
• Ensures that all aspect of quality control in relation to contract documents are identified and observed. 
• Verifies methods for testing, instrument calibration and evaluation for performing designated inspection and testing.  
• Selects works for tests at specified stages and records test data applying statistical quality control procedures. 
• Evaluates data and write reports to validate or indicate deviation from existing standards. 
• Ensures that deficiencies are lifted before work finalization and notifies the Site Engineer of any defective work. 

• Perform daily inspection and test material to achieve quality of construction .
• Control and monitoring all activities following quality management system.
• Receive or rejecting all kind of unqualified/unneeded material.
• Working as quality controller both in concrete and road work.
• Taking care QA/QC documents include certificate, calibration, test results, inspection request and site inspection.
• Coordinate with consultant representative for inspection and meeting about quality problem. 
• Conducted soil field test and other laboratory tests required for road works.

•   Surveillance during welding to verify compliance with specified procedures including any pre­heat, interpass temperature control and post heat require­ments.
•  Assistance and agreement with the preparation of Inspection and Test Plans (ITP’s)
•   Verification, when required that post weld heat treat­ment has been conducted in accordance with specification requirements
•   Visual inspection and dimensional check of completed weldment against specification require­ments and drawings.

• Witness of welder qualification test as per approved WPS. 
• Perform Radiography of pipeline joints and also T joints of Tanks. 
• Witness of NDT result as per ITP. 
• Field inspection of welding of flow line joints as per approved WPS. 
• Visual inspection of T joints of tanks and also interpretation of radio graphic films. 
• To inspect the fit up and welding joints of piping of well heads. 

• Determined and recommended methods to address improvement opportunities
• Calibrated instruments and scales in production area and quality lab
• Developed standard operating procedures and document workflows for current and future process steps
• Investigated and resolved customer complaints through [Action] to customer satisfaction
• Supervised production planning while using appropriate tools and analysis for smooth production output
• Partnered with cross-functional teams to conduct thorough discovery and due diligence on existing processes

• Assigned at 34th Street Avida Towers at BGC Taguig City Project. The project has thirty-six floors per tower including podium and residential floors.
• Ensured proper and technical execution of design plans and layouts and its commissioning and testing for plumbing line in both sanitary and domestic waterlines. 
•  Assured good planning of daily deployment of workers and monitoring of daily operations and accomplishments on site. 
• Responsible for quality control of documents and technical reports.

•  Interpretation of the intent and ensuring the requirements of codes, standards and specifications are met.
•   Ensuring that a procedure is available, has been approved and is being employed in production.
• Verifying that adequate and valid welder approvals are available, and that only approved welders are used in production.
•  Verifying parent material against documentation and markings.
•  Verification of correctness of welding consumables (electrodes, filler wires, consumable in­serts, gases, fluxes etc.
•   Verification that dimensions, fit-up and weld preparations are in accordance with specifications.
•   Verification that any required preheat is in accordance with the specified procedure.

• Site Inspection (Development, Measurements, Safety, Environmental, Risk Assessments)  
• Designing, Running, Test & Upgrade Systems & Processes
• Production (Layout Drawing, FRP Tanks, PTU System)
• QC (Inspection, Testing, Reporting & Clearing Issues)
• Commissioning & Services ( Asia & Asia Pacific )
• Documentations (Check Sheets, User Manual according to Projects)
• Training (On-site Class Training to Operators & Engineers about Operation Systems & Maintain daily logouts with Safety)  

•  Preparing inspection reports and other relevant documents.
• Control of execution of works according to the engineering documentation, construction norms and regulations and time schedule. 
• Passive fire protection
• Repair painting of steel structures, equipment and pipe lines.

•  Preparing the reinstatement documentation
•  Verify preparation of piping test package including piping test record.
•   Preparation of Record of Repairs.
•  Service activities inclusive of fabrication, installation of piping, hydro testing and commissioning works.

•  Manual Testing – Client and server
• SQL Queries for statistical analysis and marketing activity
•  Preparation and monitoring of Non-Conformance reports ( NCR)
•  Inspection of various activities

•  Verify initiation of field piping and equipment pressure test punch list. Ensure correction or completion of punch list items.
•   Preparation &review of Hydro test  packages for tie-in and nearly installed pipelines.
•  Review and maintaining records of Calibration certificates of Instruments, Personnel Certifications.
•   Witnessed hydro test and of pipelines prior to pre-commissioning.

• Involved in Manual Testing work for Extreme Digital Solutions in Different Product, Need to create test cases for different module. Find bugs and reporting into bug tracking tool.
• Take part into review meeting and group meeting to discuss and solve doubts.
• Do client communication for clear doubts and understand their needs.
•  Checking of joints and different fittings.

• Approves external and internal documents by confirming specifications;
• Conducting visual and measurement tests;
• Execution the executive technical documents (general magazines, check sheets, an act of non-compliance, etc.)
• Collection, registration and maintenance of an electronic database of accompanying documents for products.
• Drawing up of acts, protocols (act of the concealed works, intermittent works and others.), control construction norms and regulations (post log of asphalt-concrete work, performance of the work, etc.)
• Performs compaction testing: ground warp and soil-aggregate mixture.
• Withdrawal of pavement for core testing 

• ISO Team Committee ISO 14001:2015 Training
• ISO 9001:2015 Training
• VDA 6.2 Training (SGS)
• Core Tool Training (PFMEA, PPAP. APQP, 8D Analysis, X-R Control)
• Internal Audit (Lead Auditor) 

• Follow and practice of International codes ASME, ASTM, ANSI, and     Saudi Aramco engineering procedures 
•  Receiving piping isometrics, support drawings and details.
•  Confirm the piping system concurs with flow diagrams to verify completeness of system.
• Verify materials as per fitting and pipe mill certificate.
•  Preparing the Punch List of before Hydro test.
•  Verification of closed punch items and conduct walk through for each completed piping system prior to mechanical acceptance.
•  Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, rating of flanges, proper flange face and fittings.

• Collect samples of water for analysis from each of the vessel. 
• Measured dimensions and verifying level, alignment, elevation of structures and fixtures to ensure compliance to building plans and codes.
• Maintained daily logs and supplement inspection records with photographs.
• Evaluated premises for cleanliness, including housekeeping, proper garbage disposal and various hazards

• Became a part of an existing management team as a quality assurance/quality control manager
• Coordinated and communicated with supervising personnel, owners, building management, contractors and trades to discuss and resolve matters, such as work procedures, complaints, or construction problems.
• Interpreted and explained plans to trades, and clients, representing the owner or developer as needed.
• Planned, organized, and directed activities concerned with the construction and maintenance of structures, facilities, and systems.
• Overseen the completion specific pieces of the project, such as rough-ins for plumbing, electrical, HVAC, pre-board inspections, framing, boarding, painting, flooring and tile work, millwork, trim work, doors and hardware, plumbing fixtures.
• Directed and supervised trade workers as needed.
• Investigated damages and delays, to ensure that proper procedures are being carried out.

• Enterprise Asset management System (EAMS ) Maximo activities. 
• Verify quality reports or perform quality checks and report  non-conformance issues to superiors.
• Interface with Engineering and Operations department  to ensure the execution works are in accordance with approved data.
•  Review of Material Submittals  and  other Technical Documents .

• Received Daily Welding Report (DWR) and make sure all the data complies with the guideline given by client (PETRONAS). After that, the DWR need to send to CPM client (OUI JV) for claim issue. All DWR have the due date and “cut time” to make sure that client can do a checking and encounter the error report. The error report will be rejected and need to revise back. Being of that, as a Document control in qa/qc department (DC) we also have our own master record for further action and tracking. 
• Checking and Updating the register for progress on site. 
• Assist QC Inspector Regarding rejected pipe / joint 
• Conducting  quality inspection of Preventive and Corrective Maintenance activities as per standards and  approved documents.

•  Inspection of MEPFS before pouring is structural slab
• Coordination with MEPFS Tradecons 
• Submits Request for Approval / Information to MEPFS Designers
• Coordination with suppliers to meet standards and as specs of designers
• Check the quality and assurance of the product as per design and specification of the work
• Taking care of QA/QC documents
• Responsible for the closure of Non-conformance, NCR and Site Instruction, SI.

• Verified the quality of products due for release based on established users and standard acceptance criteria.
• Completed functional, end-to-end, regression and verification tests on various software applications and platforms.
• Monitoring  the procedures to ensure that all the works  are performed according to established item specifications, standard test methods, or protocols.
• Review and Approval of Preventive Maintenance (PM) Plans.