production operator

  • Experienced in all manners of coal mining operations
  • Multi-skilled in plant operation, including train loading and treatment plant
  • Experience with pumping of waste water from mines
  • Water truck operations
  • 2 months training on 850 Dragline, including ground operation and machine operation
  • Operation of service truck and workshop fitter assistant
  • Competent operator of loaders, excavators, haul trucks, dozer, bob cat, fork lift and cranes

production operator

  • Have an experience of working on HMC, VMC & Radial Drilling Machine.
  • Assisted Machine operator with setting up.
  • Set up and adjusted machine for day to day operation.
  • Demonstrated proper use of machine to newly employed persons to avoid workplace injuries.

production operator

  • Operate platform.
  • Keep platform online.
  • Watch levels and gauges on vessels.
  • Make sure no oil is spilling into the Gulf.
  • Check wells, flowing pressure, check glycol unit, heater treated.
  • Make sure wells are lined up to the right location.
  • Keep a safe and good house keeping.

production operator

  • Testing of electronics production panel 
  • electronics production panel routing.
  • Support to R&D projects
  • PCB assembly (SOIC,TQFP,TSSOP Packages)
  • SIM 800A module Assembly
  • Electronics production store maintanence.
  •  Select electronics equipment, components, or systems to meet functional specifications. 

production operator

  • Clean and organize production line
  • make minor repairs on production machines
  • observe machine to ensure production quality
  • add and remove labels, wrappers, and glue from machines for the product

production operator

  • Tanking operator
  • Cable turner
  • heavy equiptment operator
  • record keeping 
  • ability to lead a crew
  • involved in shiploading
  • inspection of product

production operator

  • Task with maintaining a safe working environment
  • Assembly of products step by step
  • Prepairing finish products for packing
  • Operating the packing machine

production operator

  • Operate or tend automated assembling equipment, and fixed automation equipment.
  • Clean and fix ic’s to insure good quality products .
  • Operate or tend automated testing equipment, such as tape and reel machines, lead and marking scan machines.
  • Measure, examine, or test completed units to check for defects and ensure high quality products.

production operator

  •  Improved production and efficiency by over 10% by enhancing     working conditions with distributed leadership and team development 
  • Setting and operating machinery
  •  Conducting regular inspections of machinery and fixing issues in a   timely manner to ensure that they run smoothly, avoiding unnecessary delays 
  • Problem solving skills, demonstrated experience of this in fault finding.
  • Use of 5 Why’s and Root cause analysis. 
  • Continuous improvement tools.
  • Ensuring efficient productivity on the line

production operator

  • Pack or fold insulation between panels.Assemble the connector to the PWB,
  • Assemble the knobs to the buttons,
  • Using the robot to do the solder and check wether the product is good or reject.
  • Disassemble units to replace parts or to crate them for shipping. 

production operator / water treatment operator

  • Operate pumping systems.
  • Hazardous chemical handling
  • Operate filter systems 
  • Stand in team leader

production operator

  • Packaged finished industry products and prepared packages for accurate shipping.
  • Used hand trucks, forklifts and scissor lifts to complete tasks and transport items.
  • Set up and adjusted machines for day-to-day operations.
  • Loaded supplies into machines by hand or by hoist.

production operator

  • Driving various vehicles including Dump Truck 793F ,789D, 789C , Water Cart, Grader and 4WD vehicles. 
  • Operate equipment safely and effectively for production processing
  • Ensure that equipment are maintained in good and safe working condition.
  • Provide assistance to junior operators in the assigned responsibilities
  • work under the guidance of Supervisor to perform and complete the assigned duties in timely manner.
  • Follow safety procedures and company policies for equipment operation.
  • Indentify and report unsafe operations to Supervisor .

production operator

  • Ability to perform all duties and responsibilities associated with Wire Machine Operator Level 2
  • Additional duties and responsibilities include:
  • Interprets job specifications, job orders, production schedules to determine process and material requirements
  • Monitors and controls all process setups and parameters to maintain acceptable product quality standards. (i.e. diameter control, line speed, screw speeds, melt temperatures, and all remaining process parameters and variables).
  • Perform clean outs, changeovers and tip and die tooling changes in a timely fashion without assistance.
  • Able to troubleshoot heating circuits with multi-meter (heater bands, thermocouples and fuses)
  • Places reel of specified wire onto pay off spindle of machine and threads wire through feed rolls.

production operator

  • Perform repetitive assembly operations
  • Read and interpret work orders
  • Use hand tools and powered tools
  • Complete 100% inspection to ensure wiring and all parts are in place
  • Cross-train and perform production requirements

production operator

  • Conduct fire water system weekly run-test and fire extinguisher monthly checks or per approved schedule. Communicate issues and findings to Lead Operator/CCR Operator.
  • Conduct Work Permit and activities assessment for ongoing activity and provide timely feedback to work group for improvement.
  • Participates in development, review and revalidating of operating procedures, understand safe operating limit of parameters and equipment.
  • Lead weekly safety meeting when scheduled.

production operator/machine operator

  • To perform the required processed in order to meet the standard requirements of the products. 
  • To determines appropriate types of models to be tested in functional testing and to ensure that no mixing of products. 
  • Maintain the good condition of the tools and materials needed in the process. 
  • Ensure sufficient chemical, LPG, Nitrogen, Ammonia and diesel fuel stocks and inform Control Room Operator and Lead Operator for replenishment.

production operator

  • Lift, position, and secure resins – formaldehyde and methanol using equipment.
  • Mix, cook, prepare resins.
  • Test, check pH levels and viscosity.
  • Perform proper equipment reinstatement after maintenance activity completed or long term isolation resume.

production operator

  • Assemble parts or units, and position, align, and fasten units to assemblies, sub-assemblies, or frames, using hand tools.
  • Proven ability to evaluate samples of products to make them packaging-ready.
  • Watch closely critical works being performed within assigned areas such as Confined Space, Lifting, work at height, breaking containment, hot work, etc. Intervene immediately or stop the work when deviation to safe work practice, work management system or safety regulation is observed.
  • Perform equipment isolation, draining, purging/venting, and ICC application either prior hand over for maintenance or for long term isolation/decommissioning purpose. Apply car-seal open/close accordingly.

production operator

  •  Operate production facilities in safe manner and following approved operating procedures and work practices within operating envelope, maximized reliability and maintaining integrity.
  • Conduct daily surveillance rounds timely, record parameters and required tasks. Discuss with Lead Operator/Supervisor any issues and discrepancy found during the rounds.
  • Report immediately to Control Room Operator/Lead Operator any abnormality and unsafe condition observed during conducting the rounds. Provide first line control of situation under close communication with CCR operator, including justification to local shutdown or ESD should condition becomes uncontrollable.
  • A reliable member of ERT team to handle emergency situation to minimize impact to personnel onboard, production downtime, environmental and community.
  • Review work permit pack requirement for completeness including thorough hazard identification and mitigation (JSA). Confirm required isolation have been applied, zero energy demonstrated, and where applicable, adequate rescue and lifting plan are available to provide a safe environment for personnel to perform the work. This is a mandatory requirement prior signing work permit to live.
  • Manage SIMOPS when it is approved. Monitor safety devices under bypass/defeats to ensure prevention and mitigation actions implemented
  • Stop, intervene, and approach others when unsafe act/manner observed.

production operator

  •  Operate grinding machine to decrease the thickness of slider.
  •  Measure and compute the thickness of slider.
  • Encoder
  • Adept at cleaning and maintaining work areas and machinery to ensure both workplace safety and optimum use of machinery.

production operator

  • Oversee MachineryFrom calibrating equipment to monitoring gauges, production operators attend to machines so they operate correctly and produce the desired results. When something doesn’t sound, act, or seem right, the production operator investigates, making adjustments. Likewise, they set up cleaning and maintenance schedules to prevent problems by keeping machines in good working order.
  • Inspect Finished ProductsSometimes it can be difficult to know that a machine has a problem until you look at the items it produces. Production operators act as quality control when they examine output to ensure what’s being made lives up to standard. If they notice a defect, production operators must figure out where the error is occurring and correct it so that future batches come out right.
  • Understand DeadlinesCompanies can’t make money if they lack things to sell! Production operators are aware of the output goals that ensure sufficient quantity to meet delivery obligations. Delays lead to empty store shelves or dissatisfied clients.
  • Report to LeadersProduction operators often present their supervisors with reports on daily activities. They also inform managers when they notice anything that might be affecting assembly line output.
  • Maintain a Safe EnvironmentProduction operators often work with large, powerful equipment. They abide by workplace and governmental guidelines to reduce the chance of injury to themselves and others. Wearing proper safety gear and cleaning up their work area are two basic safety actions.

production operator

  • Work railroad track switches for storing railcars for shipment
  • Notify Shift Supervisor of any unusual leaks or spills in the field or anything appears unsafe. 
  • Maintain Pellet trap and outfall
  • Troubleshooting and unplugging lines and rotary feeders

production operator

  • Engage in the production or processing of goods, such as inspectors, machine setters, and fabricators. 
  • Inspect materials, products, or equipment to detect defects or malfunctions. in the production or processing of goods, such as inspectors, machine setters, and fabricators.
  • Loading and inspecting hopper trucks for shipping
  • Load and inspect railcars 

production operator

  • Change Aeration filters in work area
  • Inspect and Calibrate MSA monitors for use
  • Attend company events and meetings
  • Assist with unloading of trucks

production operator

  • Safety inspections and lock out tag outs are done on equipment
  • Operate fork lift and track mobile shifting rail cars
  • Check ATR data base for new assignments and complete
  • Do Daily RCRA inspections in Database for emissions

production operator

  • Participate in training in equipment operations or work and safety procedures.
  • Set up and adjust machines and equipment.Observe color of products being blend and adjust pasteurizing temperatures, or conveyor speeds accordingly.
  • Set time and speed controls for mixing machines/blending machines,  so that ingredients will be mixed according to instructions.
  • Work with the Allen Bradley Systems

production operator

  •  Loaded supplies into machines by hand 
  •  Prepared machines for daily use by calibrating and performing preventive maintenance 
  • Fill out log books correctly 
  • Fill out permits for contractors that work in my area

production operator

  • Clean blowback systems and inspect lobe pumps for oil or any sign of mechanical failure
  • Inspect track mobile and forklifts
  • Inspect aeration blowers and aeration air on header to verify air.
  • Verify slide gates on Silos for material Handler operations

production operator

  • responsible for any job that is given
  • be alert and always be on time
  • follow every steps that are given and always ware the proper PPE in the production area
  • Inspect and wash Silos after pellets are transferred from blenders