production engineer

  • Preparation of Bill of Material (BOM).
  • Develop, coordinate, monitor all aspects of production, including selection of manufacturing methods, fabrication, operation of product designs.
  • Perform personnel functions such as supervision of production workers, technicians, technologists and other engineers.
  • Establish and coordinate the maintenance  procedures, service schedule,  supply of materials required .
  • Document daily production and availibility of materials.

junior production engineer

  • I am worked at “Alectrona Energy Pvt Ltd” located at kunnam, kanchipuram . My  position in this company as Junior Production Engineer.
  •  My primary role in this company is Manual Insertion Of Electronic Component and then to Inspect Inverter Main PCB Board, Inverter Display PCB Board. Finally after all inspection, PCB Board sent to wave soldering machine to complete the solder process. 
  •  If board fails in testing, again inspection and corrective measure taken and finally again PCB board send to wave soldering machine. 
  •  I have gathered experience nearly around 6 Months in certain Core field environment above mentioned company.  

senior production engineer

  • Responsible for improving skill level of team members.
  • Analysis of rejection, rework, scrap data procedure at in process,
  • Periodic review for corrective & preventive action to conform effectiveness. 
  • Taking initiative into solving customer complaints.

production engineer

  • Planning day to day production to achieve maximum production.  
  • Allocation & utilization of the manpower as per plan.
  • Arranging, repairing and maintaining machine tools. 
  • Analysis of daily tool consumption and generation of  production reports.
  • Ensured proper housekeeping and coordinating with workers.
  • Simultaneously working towards productivity and quality improvement through Kaizen activities.
  • Material Planning & arrangement according to production schedule. 

production engineer

  • Plan, manage, and oversee all elements of production in our factory.
  • Maximize productivity of machinery and workers.
  • Follow product specifications and quality control measures.
  • Increase speed and efficiency of processes without compromising quality.
  • Educate employees on proper methods in which to operate and engage with machinery.

production engineer

  • Worked as a Production & QC Engineer 
  • Check, Study & Work on Drawing given by client. 
  • Maintain quality of particular specification given in drawing of total job. 
  • Marking on plates, check quality of fitters. 
  • Handle workers and teach them how to work. 
  • Maintain safety as per procedure given by client. 
  • Seam joint welding Quality Control. 

production engineer

  •  Drawing & 3D Modeling:- Modeling & Drafting of various Machine components for Bajaj Ginning machines using  AutoCAD.
  • Laser Cutting:- To design customers drawing to execute them for Laser cutting.
  •  Looking for- Planning 
  • Nesting 
  • Scrap reduction to below 15% (Bystronic 4020 Fiber Laser) 

production engineer

  • Independently handled a Polyester film manufacturing Plant, managed all Plant activities, operations during this period.
  • Responsible for delivering line efficiency, line utilization, Production planning, and Productivity.
  • Gained Expertise in Process optimization, Data Analysis.
  • Responsible for the centralized filter cleaning and assembly Unit in Production department and responsible for all filter operations.
  • Responsible for filter pressure vessel design and development for Erema Plant – Design of the filter housing, Jacket Pressure vessel according to ASME standards, Inspection and testing of the welded assembly. Installation and commissioning at the Required Location. This has resulted into cost saving as well as improved safety, Productivity, Maintenance.
  • Implementation of TPM. Conduct of JH Step 1, Step 2, Step3, 5S Activities.

production engineer

  • Responsible in Engineering cost reduction projects such as Automation and power cost reduction in the Molding Department. 
  • Oversees the Keyence Vision System Automatic Inspection machines.
  • 3D design of jigs, tools and equipment using 2D and 3D softwares such as AutoDesk AutoCad and AutoDesk Inventor
  • Supports manufacturing production on engineering related concerns

production engineer

  • Responsible for manufacturing of Instument Transformers.
  • production planning.
  • cost management and quality.
  • Manpower mangement.

production engineer

  • Plan and coordinate the production plan for upcoming week and days to production supervisor along with overseeing available material and dispatch plan.
  • Keep records of daily production, rework and rejection produced on line.
  • Monitoring OEE data for continual improvement in production along with improved inprocess quality.
  • Teach labours & give instruction for parts of job. 

production engineer

  • Assist in scheduling, assembly, and packaging to ensure optimal timing of all orders. 
  • Implemented KPI’s for various manufacturing departments to help measure Managing Daily Improvement 
  • Implemented visual pull system that reduced the lead time and inventory
  • Implemented Just-in-Time (JIT) techniques to optimize throughput and lower warehouse costs by as much as 18% 

production engineer

  • Communicate with other team members to enhance process and performance.
  • Supervise entire production process and prepared proper documentation.
  • Supervised team of 40 lathe operator.
  • Planned and forecasted labour hours for new processes .
  • Co-ordinate with design team to produce machine components.
  • Plan the component to be manufactured. And make the complete list of required items to be made in our plant or outside
  • Handle all phases of manufacturing process of the components till finished product.

production engineer

  • Increase production by implementing new programs or by modifying it.
  • Complete production reports, purchase orders, and material, tool, and equipment lists. 
  • Overall responsible for manufacturing operations including 4M & 5S.
  • Making monthly presentation on production & quality improvement, kaizen.

production engineer

  • Direct or coordinate activities of engineering or technical personnel involved in designing,development, modifying, or testing of CNC Wire Cut and Die Sinking EDM control panel.
  • Formulate conceptual design of CNC Wirecut and Die Sinking EDM products or systems to meet customer requirements.
  • Provide engineering support for production to improve product quality. 
  • Timely dispatch of finished goods.

production engineer

  • Strong knowledge in implementing and testing of PCB Layout small scale transformers.
  • Calculating high-peak production activities and analyzing on reducing downtime and outages.
  • Developed and maintained documentation for IN-PROGRESS INSPECTION REPORT and NON CONFORMITY REPORT of our company product.
  • Effectively working the Product team to find the root cause for the repeated failure.
  • Tracing the circuits & fix the problems in PCB.
  • Reducing the scrap quantity and increasing repair quantity.

production engineer

  • tracking
  • data entry. 
  • Maximized productivity on the job by developing and implementing innovative production processes.
  • ISO standards and Quality standards like 5s, kaizen knowledge.

production engineer

  • Worked on this type of job as a production engineer. 
  • Heat Exchanger (Steel) 
  • Coal Gesifier (MS) 
  • Surface Condenser (MS/Titanium) 
  • Ash Lock (MS) 
  • Coal Lock (MS) 
  • Maintain all type of job quality and work on drawing & procedure. 

production engineer

  • Production planning.
  • Material requirement planning.
  • Preparing production report on daily basis.
  • Responsible for  achievement of the production plans for manufacture of parts.
  • Look after the daily production problems.
  • Responsible for analyzing the material, equipment and tools requirements according to production plan.
  • Responsible for the proper implementation of planning & quality product in process along with overseeing that the production target is achieved with acceptable quality.

production engineer

  • Scale and integrate resources. production planning.
  • Make proper use of math and statistics to model production systems during decision making process.
  • Incorporate concepts and quality techniques along all the productive system.
  • Manage and optimize flow (information and production flow) materials management.
  • manufacturing management .

production engineer

  • Conduct Basic Design Calculations of pressure vessels, strainers and piping components and systems in accordance with applicable codes, standards, and guidelines.
  •  Analysis of customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and manufacturability of strainer element designs or applications. 
  • Creation and refinement of the technical bill of materials and assembly drawings to accomplish the manufacturing of a project.
  •  Data management and job pack release process activities. 

production engineer

  • Proficient at handling day to day activities on the shop floor in co-ordination with internal/external departments for ensuring smooth production operations.
  • Experience of Single Screw (Sheet & Rod) Extruder for POM, Nylon, and Polypropylene.
  • Compression molding of polyethylene(UHMWPE) Sheets.
  • RAM Extrusion of Polyethylene Sheets.
  • Maintenance and Preventive maintenance of compressor, thermic heater, heat exchanger system, planner, cooling tower, Chiller, etc.
  • Knowledge of Hydraulics and Pneumatics.
  • Work out on customer complaints and take corrective actions to avoid such complaints in the future.

production engineer

  • Applying 4M in the company.
  • To monitor the daily production.
  • Read and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs. 
  •  production scheduling

production engineer

  • Provide engineering support for production and maintenance activities to ensure maximum production.
  • Implement cost reduction initiatives while maintaining high quality standards.
  • Update the daily Production in ERP and physical inventory maintenance.
  • Responsible for ERP Production Planning & Master Data handling like BOM, Routings.
  • Shop Floor and Man Power Handling.

production engineer

  • Experience in managing production operations with key focus on optimal utilization of the resources. 
  • Result oriented record of streamlining the working SOPs for enhanced operational performance. 
  • Single handedly managing 20 members in the shift.
  • Collaborated and co-ordinated with internal departments and proficient in handling and monitoring operations involving  material planning and In-process inspection.

production engineer

  • Maintain Job Cards
  • Production as per Preplanning 
  • products are manufactured with utmost efficiency and quality
  • Production Report 
  • Make Excel sheet of production data

senior production engineer

  • Resolved customer issues through phone, email, and chat conversations
  • Identify process improvement and bottleneck removal opportunities, find implement solutions working collaboritivety with internal team and/or exernal suppliers
  • Provide technical support, investigate and resolve equipment, operational and performance issues
  • Lead plant engineering technical and capital  acquisition projects
  • Perform relief duties for supervisor as needed
  • Work closely (training) with shift process teams so lines are consistenly operate at peaks efficiently

production engineer

  • Plan and coordinate production engineering process on daily basis to produce high quality products.
  • Enforce safety in the workplace. 
  • familiar with SAP for production entries and material management.
  • Coordinating with production managers and labors working on assemblies.

production engineer

  • Responsible for quality inspections of produced parts.
  • Involved in R&D of Rustom-2(UAV,Drone) and Nirbhay missile. 
  • Involved in manufacturing of supporting fixtures.
  • Studied and performed non-destructive techniques on several critical parts in above mentioned projects.
  • Maintained track of ongoing production of parts and components
  • Preparing process sheets for Fibre Reinforcement Polymer(FRP) component.
  • Preparing job cards and route cards for metal components.

production engineer

  • Company Profile Polycraftpuf manufacturers machinery to process polyurethane foam, elastomers, RRIM and urethane coatings. In addition to producing polyurethane equipment, we supply and integrate all the equipment for your production facility including:robotics
  • molds
  • fixtures
  • clamps 
  • conveyors
  • bulk material storage
  • blending equipment