• Handled and took in charge of maintaining and operating SPRAY DRIER unit for producing Copper Chromite.
•  Involved in the maintenance and handling of FLASH CALCINER for producing Chrome Alumina.
• Analyze the root cause from customer feedback and prepare 8D report.
• Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.ders and ensure compliance to all time frame for all fabricated products.

• Analyze all fabrication drawings from design department
• List out the priority of fabrication, time frame, sequence of operations to follow, tests to be conducted, project- specs and  quality of delivery.
• Coordinate with technicians and provide support to all teams and maintain quality of all work processes in systems.
• Manage all communication with supervisors and ensure efficiency of all fabrication process and resolve all issues for processes.
• Design various ideas for Different steel sections. and prepare detail drawings for all fabrication processes.
• Prepare estimates and quotes for all supply materials and assist to fabricate and weld all products.
• Plan all materials for new products and ensure optimal utilization of all resources and administer product or

•  Design and Assembly of Projects :  – Fan Label Inspection Machine
•   – AOI PCB Inspection Machine
•   – Aging Booth 
•   – PCB Connector Jigs

• Working as Supervisor For KITE UNDERBODY, taking care of whole functioning of the shift
• Responsible for Meeting production target with required quality in BIW (Weld Shop) , PSF ,Trouble shooting of shop floor activities to prevent rejection and reworks , Manpower management and proper deployment.
• Planning of man, materials and tools to achieve targets as per the production plan.
• Preparing operating standards & work instructions sheet for engineering operation for the unit
• Implementation of Kaizen activities in Weld shop to improve productivity and safety of workers
• Daily Down time report preparation.

• To check the rating of LED product in final stage production.
• to give the analysing data to higher authority. 
• Estimate production costs and develop cost saving methods.
• Machine setup and maintenance. 

• Managing daily and monthly production rate of the field.
• Preparing, programming and following up rigless operations (Acid Stimulation, Filtercake Removal and Nitrogen Kickoff).
• Following up regular temperature and pressure surveys. 
• Monitor all wells in the field for any wellhead pressure drop, Annulus or casing pressure increase and any ESP/ PDHMS failures which required workover.

• Ordering Material from Store Keeper and issuing work orders to Production.
• Providing Lead-time to Sales. Giving Cost for sales Quotation
• Production Planning and Control.
• Troubleshooting and coordinating the workers.

• work closely with technicians and   have various duties, including installing and maintaining equipment , diagnosing problems with processes and equipment, designing new systems, supervising team members, and maintaining statistical records.
•  Competently handled Hydro-fining maintenance jobs for improving the performance of the section. 
• Handling responsible for safety of people and equipment by ensuring safety systems are in work place and there is no deviation from safety standards. 
• Receiving Orders or enquiries from Customers and Sales Man.

• Operate the oven for food production and maintain
• Check the Temperature monitor and the band of oven
• Check and monitor the pressure of LPG from tank to production area
• Operate the Utilities and maintain with the Seniors
• Operate the Water Treatment Plant

• Ensured all work orders submitted per specified schedule.
• Avoided material shortages through research and planning.
• Avoided production delays in coordination with material planners.
• Optimized utilization of labor and material to forecast long term production schedules.
• Preformed weekly requirement evaluation in coordination with material operations and planning teams.
• maintained and updated short and long term process records

• Quality, Health and Safety (QEHS) Management Systems.
• Supplier Management System, incoming and suppliers improvement activities.
• Supervising the work of office juniors and assigning work for them.
• Monitoring inventory, office stock and ordering supplies as necessary.
• Raising material requisition to the purchaser.
• Creating and modifying documents using Microsoft Office and Updating, processing, and filing of all documents.
• Setting up and coordinating meetings and conferences.

• Production engineer Responsible for the production planning and control of a particular processing department 
• Responsible for all the administrative and management controls of the department 
• Responsible for the process optimization for the manufacturing processes
• Responsible for the quality of Materials produced. 

•  In-Charge of supervising the functioning of Ammonia plant (1260 TPD) which runs on ICI steam reforming process with naphtha as feed stock.
•  Gained rich experience of handling units which include Hydro-fining section (Naphtha Sweetening unit), steam naphtha reforming unit and tank farm operations.
• Experience in handling floating roof tank with 8750KL capacity. 
• Safety features like adjustable supporting legs,neoprene seals,breather vents,rim vent,wind girders,foam pourer system and drain system are available in Naphtha tank farm.
• Having knowledge in primary and secondary desulphurisation units to bring down the sulphur content from 1500 ppm to 5 ppm.
•  Gained good knowledge in operating, controlling and trouble-shooting of water tube boiler which operates at capacity of (85+85+120) TPH, 106 ata pressure. 
•  Adeptly handled heat exchangers startup and shut down maintenance having the credit of handling about 120 heat exchangers. 

• Able to reduce Cost of Poor Quality (COPQ) for two Indonesia Toys suppliers by -70% and -30% in FY 2016 compare to 2015. 
• Consecutively in FY17 and FY18 achieved and exceed quality KPIs with suppliers, e.g. COPQ and Customer Returned Product Quality (CRPQ). 
• Solved some critical compliance issues, such as: Wrong fiber composition declaration on labels for some soft toys and synthetic rugs products.
• Material selection and composition instability causing flammability issues on synthetic rugs with high pile fibers.
• Foam (for soft toys and chair pads filling material) production at sub-supplier failed to comply with IKEA special process appendix for foam. 
• Threads and high pile fibers failed on some critical chemical results, resulting in major production site improvement at high pile fibers sub-supplier, and phase out of one big thread sub-supplier in Indonesia due to could not prove compliance adherence to IKEA requirements.

• Have to do production planning for Capping, Filling and Labelling machine
• Have to go for machine installation and troubleshoot issues
• Other responsibility to take Factory Test Acceptance Report (FAT)
• Work scheduling and Resource allocation

• Responsible to achieve the production target overcoming all the Challenges.
• Plan the schedule for production on daily basis and manage the work force according to daily production target.
• Ensure material flow in accordance with KANBAN principle on daily basis to achieve uniform Production.
• Increase production by implementing various process such as 5S , Kaizen & Poka Yoke.
• Preformed production studies & machine analysis to identify quality & process problem.
• Increase productivity by implementing cycle time on each assembly.
• Work out on customer complaint and take corrective action to avoid such complaint in future.

• Provided support to the production and design team, developed the electronic hardware and their specification.
• Production head for 10 Member Team for SMD Production. 
• Proficient in using MATLAB, Analog, Digital, CHM-T48VA, Embedded C-programming on Atmel, Pic controllers on basic levels.
• Testing report and analyzing the default and reporting to R&D dept.
• Completion of project in time, handle productions, quality control checks to meet the result as per the design.
• Conducted trainings to new electronics engineer to orient them on standard policies and procedures.

• Completed and submitted monthly and reports to enhance executive decision making 
• Inspected all machines and equipment and provided necessary repairs 
• Wrote protocols, qualification documents, test plans and test reports for quality assurance purposes 
• Supervised entire production process and prepared proper documentation for dispatch 
• Created engineering documentation, including manufacturing processes, equipment specifications and change notices and implemented modifications 

•  Worked as Production Engineer in Machine shop ( Study the drawing, making NC program through Master CAM) and preparing daily production report .
•  Inspected the all raw materials preparing the QAP and instruction to CNC Operator.    
• Doing Internal inspection and making internal report.
• Attending weekly production meetings and giving instructions to shift Engineers according to planned strategy to improve productivity.

•   To take charge of Shift wise production and quality activities at Fast loop line core setting, mould closing, Pouring, knockout and de-coring activities.
•  To check core setting process as per the requirement of casting drawing & to ensure all related activities as per WI.
•  To study core setting & mould closing cycle time and to suggests improvements to reducing it.
•  To prepare and submit CAPA after detailed study of causes for product Nonconformance & to conclude with root cause by discussion with operators/colleagues/Seniors.
•  To implement corrective & preventive actions decided for NCs. and to check for effectiveness. Authorized to stop further process of any item if deviation found and could not resolved at Engineer level. 
•  To maintain best practices of safety and housekeeping in the dept.To take care the safety of Man. Machine and Material in the dept.To work and contribute in any initiatives allotted.To handle any additional responsibilities given by HOD from time to time.
•  To maintain all records / Check sheets related to core setting, Mould closing ,pouring process and knockout process. Refer Production manual.

•  Trained to produce the different types of water controller units in various applications.
•   Trained to design PCB layout manually and also check its function.
•   Ability to design all the level of production process from PCB design to final testing.
•   Done also the QA/QC inspection for the raw materials.
•  Train, supervise, and manage production line workers.
•  Dispatch In-charge for the produced items after the QA/QC inspection.
•   Knowledge to manage store keeping process.

• Handle single shift of spinning section there are included no. of machines like hot spinning m/c, pipe cutting m/c, horizontal milling m/c, hydraulic press m/c. 
• Control and programmed hot formation CNC m/c (spinning machines with SINUMERIK 840D controller). 
• Maintenance of CNC machinery and equipment’s on daily basis. 
• Perform responsibility of generating ideas for cost saving and to produce product with zero defect. 
•  In process production and raw material analysis, troubleshooting. 

• Customer RFP/RFQ Product Engineering Technical and Manufacturing Capability Analysis Response 
• In charge of a sample and new project qualification process with coordination to the whole team 
• Responsible for updating cost estimation results to the project Controller to assure integration of the results into the Business Plan
• Manage end to end process of production of each Project
• To Inspect Material and Component Specification
• Responsible for assisting estimation engineer in preparing technical and commercial bids
• Validates quality process by establishing product specifications and quality attributes

• Company Profile MARS is an engineering and manufacturing company, applying emerging technologies in a variety of industries. MARS explores new methods and concepts to suit customer requirements. Many projects are custom designed to meet the specific needs of our customers. 
• Services:SPM
• CAD/CAM/FEA
• Intricate Machining

• Experienced in handling polyester bulk molding compounds (BMC), phenol formaldehyde molding compounds / bakelite (PF), dry polyester (UP), amino molding compounds / urea formaldehyde molding compounds (UF), melamine-formaldehyde molding compounds (MF) & melamine-phenol molding compounds (MP), allyls (DAP and DAIP) as well as all thermoplastic resins / composites for molding. 
• Provided on job training to subordinates. 
• Attended customer complaint. 
• Maintained high levels on housekeeping and safety at all time. 

• Prepared process failure mode effect analysis (PFMEA) and Failure mode effect analysis (FMEA) for any new products and existing products. 
• Evaluated all alternatives to maintain all projects within required budget and initiate cost reduction method for same. 
• Coordinated all controlled document in the management system. 
• Experienced in Thermosetting and thermoplastics troubleshooting. 

•        Review drawing latest version (Issued by design engineer) before release to coating process.
•        Ensure coating system and planning process for work.
•        Planning the coating material for using.
•        Review procedure and method statement for concerned with our team.
•        Quality observation must be follow by specification since the blasting process to latest coating layer.
•        Provide and support all technical information about the coating process for the best product prior sent to customer.

• Identify the customer requirements and expectations
• Ensure all requirements are received,discussed  internally &execute
• Provide customer the recovery plan in case of any deviation from the commitment
• Attended the customer review meeting and explain the project status with plan and actual
• Reduce the rejection cost

•  Responsible for Fabrication of Pressure Vessel, Heat Exchanger, Columns, Reactors, Storage Tanks, process equipments, etc.(As per ASME section VIII Div I & TEMA)
• Pre-Production meeting, scope of work. Fixing the man power/contractor. Planning, organizing, monitoring and controlling all shop floor activities.
• Utilization of all the available resources such as manpower, machineries, materials & place. Meet the customer requirements for deliveries & Quality product.
• Organize work schedules, Entrusted all jobs were done on timely basis.
• Recommending the management for better tools, equipments, ideas, procedures, new methods for Smooth operation and increase productivity.
•  Dealing with welding processes like SMAW,GTAW,GMAW,FCAW,SAW,L-Seamer M/C welding, C-Seamer M/C welding, etc. used in Fabrication of process equipments.
• Responsible for Quarterly, Monthly & weekly planning ,activity planning, material planning, delivery planning of equipments. 

•  Ensure 5s of shop floor and TPM activities.
• Taking decision in case of emergency ( activating alarms,evacution,firefighting, first aid.)
• Liaised with mold maker for mould modification .
• Prepared First article for new parts.