process engineer (intern)

  • Sizing of Two Phase and Three Phase Separator
  • Sizing of Trayed/Packed Towers 
  • Plant Dynamic Depressurization
  • Control Valve Sizing

process engineer

  • Bid Documents Review
  • Pre Bid Clarifications
  • Simulation/Process Design using Hysys
  • Determine most effective arrangement of operations such as Cold Boxes, mixing, heat transfer, distillation, and separation.
  • Material Selection
  • Flash Calculations
  • Pipeline Hydraulics

process engineer

  • carrying out the production for of Protein Hydrolysate Liquid.
  • Responsible for the overall company research and product development.
  •  Responsible for the motivation and development of 8 member staff.
  •  Successfully accomplishing the development of new product with restricted time frame and design of plant for the manufacture of cereal protein hydrolysate with engineering PFD and P&ID development.
  •  Manage the overall production of the company with schedule completion of task.
  • Analytical testing of products on HPLC, GC, AAS, etc.
  • Process designing with complete equipment and utilities.

process engineer

  • Implementation of new Poke – Yoke on lines to reduce breakdown, increase productivity and also to improve quality of product 
  • Jigs and Fixtures modification for improvement 
  • Work on line set-up, line balancing, cycle time study, and poke – yoke study 
  • Preventive maintenance planning 
  • Monthly Kaizen project submission 
  • Doing Kaizen activity on daily basis 

process engineer

  • Responsible for conducting the time and motion study on the different parts of the operation process.
  • Assess various factors that contribute to machine downtime.
  • Create reports and proposals based on the findings that may improve the operation process. 
  • Identify, plan, and coordinate improvement projects ensuring adherence to budget and desired outcome. 

process engineer

  • Identified and debugging inefficient of process control unit to ensure the right operating parameter by cooperate with another factory in Belgium.
  • Initiated production planning and routing to ensure smooth of process control in factory.
  • ISO 9002 coordinator and certified team.
  • Safety committee to create safety SOP and WI to complied with SHE regulation which resulted 100% ontime published.

process engineer

  • Coordinate with Finance and Operation Excellence  team to prepare OEE (Overall Equipment   Equivalency) for the bottleneck equipment of critical products monthly.
  • Organize monthly meet with Finance team to monitor solvent recovery and reusage values for all the solvents distilled in SRS (Solvent Recovery System).
  • Provide product & process stewardship for the product’s quality on site by monitoring batch quality & process trends on a continual basis with an objective to ensure process robustness and improve yield / quality / capacity / de-bottle necking. 
  • Process Safety – Ensure that all production processes and activities are risk assessed from process, personnel and environmental safety perspective.
  •  Production capacity enhancement by de-bottlenecking or reduction in batch cycle times.
  • Ensure budgeted yields are met & improve on where opportunity arises.

process engineer

  • Calibration of newly set-up machine
  • Promote, implement and reinforce a culture of continuous improvement approach towards all production activities. 
  • Organize and maintain all production maintenance. 
  • Ensure conformance to ISO 9002 accreditation, EPA, Work Safe and South East Water trade waste licensing and agreements. 

process engineer / compound manager

  • Manage 10+ employees in compound department
  • Manage inventory of $45 mil+ of raw materials and production materials
  • Variance reporting (Reduced variance from 2%+ to less than .5%)
  • Analyze production data and present the monthly results for senior management team. 
  • Analyze procedures and implement any improvements
  • Root cause investigations

process engineer

  • Train production personnel in new or existing methods
  • Line sustaining
  • Perform Monthly Machine correlation and Gage R&R
  • Machine set-up and verification for new model

process engineer

  • Preparing cost estimates for new projects or changes to existing projects 
  • Preparing MOQ’s like lists of valves, piping selection, list of fabrication materials 
  • Responsible for preparing piping and instrumentation drawings, performing calculations and studying design specifications 
  • Producing Layouts for the proposed modifications in the piping, equipments etc. 
  • Coordinate with relevant departments for smooth execution of projects. 
  • Set and continually manage project expectations with team members and management. 
  • Attend meetings with customer, consultants and external contractors. 

process engineer

  • Provided process engineering support to the tank farm, refinery heaters, flares and asphalt odor abatement system.
  • Initiated project scope and design proposals.
  • Participated  in hazard reviews.
  • Monitored additive performance and evaluated fuel blend quality.

process engineer

  • Development of conceptual and basic engineering to support the execution of improvement projects.
  • Design and revision of PFDs and P&IDs, including material and energy balances and instrumentation analysis.
  • Implementing improvements in process systems, equipment, chemicals and catalyst life simulations to optimize units' operations.
  • Assessment of safety and environmental issues.
  • Technical and operational support during plant shutdowns, maintenance, and start-up operations.
  • HAZOP studies.

process engineer

  • Maintain adequate manning of production to ensure expected output, quality and safety. 
  • Manage all aspects of production activities.
  • Develop and implement departmental strategies and in support of organisation objectives contributing to the organisation competitive advantage. 
  • Develop, implement and sustain an efficient training program. 
  • Develop procedures for all production activities. Ensure they’re followed and reviewed periodically. 
  • Develop, implement and sustain a skill level system in production department. 
  • Develop, implement and sustain a bonus system program for production department. 

process engineer

  • Plan budgets and arrange for purchase of animals, feed, or supplies.Worked in Arabian United Float Glass Co, Hot End Department, as Process Engineer (October, 2019 – Now)  
  • 11. Participation in experimental work involving development of new engineering processes and their commissioning; participation in development of new equipment introduction programs, administrative and technical measures for timely development of production capacities and technological improvements; progress monitoring. 
  • 12. Development and participation in measures aimed to improve the production efficiency, to boost labour productivity, and to cut down on material consumption, labour intensity and product costs.
  • Prepare documentation for new manufacturing processes or engineering procedures

process engineer

  • Manage Program use in testing given by korean R&D
  • Korean R&D assistant in machine set-up
  • Direct reporting to korean managers (Technical / Equpiment / Production & QC)
  • Perform FACA (Failure analysis and Corrective action)
  • Korean and local customer support (Customer Audit)
  • Generates and promotes yield and defect improvements
  • Manage Control plans, work instruction and visual reference per model

process engineer

  • Review production schedules, engineering specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities.Analyze project requests, proposals, or engineering data to determine feasibility, productibility, cost, or production time of fabric production..
  • 8. Development of engineering supervision and product testing methods. 
  • 9. Compliance with the requirements of the relevant documentation within the quality management system. 
  • 10. In-process control of compliance with process discipline in shops and correct operation of production equipment. 

process engineer

  • 1. Engineering process design and implementation by means of modern automated process development tools. 
  • 2. Development of operating standards, instructions, route maps, assembly diagrams and other technical documentation.
  •  3. Provision of equipment layout plans, technological infrastructure plans and workplace engineering plans. 
  • 4. Calculation of technically sound time standards. 
  • 5. Calculation of material cost standards (consumption rates for raw materials, semi-finished products and materials). 
  • 6. Introduction of changes to technical documentation in line with adjustment of design documentation, engineering processes and process conditions. 
  • 7. Developent and coordination of engineering requirements for the production of special design products. 

process engineer

  • Optimizing, designing, and upgrading systems and industrial processes.
  • Assessing processes, taking measurements and interpreting data; reviewing P&IDs and datasheets, while inspecting them for errors and troubleshooting, suggesting and promoting more efficient operation.
  • Developing operational procedures and manuals for plant operation and maintenance
  • Overviewing project budget and timeline for equipment/chemical delivery; scheduling pre-com/commissioning.
  • Holding responsibility for technical review, scheduling and inventory management of the chemicals for both process and water treatments, catalysts; working with vendors to optimize their products to LCLA’s plant design and process. Assessing vendor provided operation/start-up manuals and optimizing to our plant’s process.

process engineer

  • Lithography Process Development, Troubleshooting, Qualification, Improvements & Investigation for various projects involving fabrication of sensors.
  • Development of critical Processes for Gold Electroplating, Metal Lift Off, resist as Sacrificial material
  • Handling & Qualifying  OIR-12,  OIR-17HD(FUJI),  PMGI,SU8 resists for  desired processes.
  • Equipment qualification & basic maintenance.

process engineer

  • As one of the first employees in the company, I was responsible to setup the Quality Control department, under the guidance of specialists from Singapore.
  • In-charge of Quality Control Department, responsible to ensure production quality. Dealing with customers with all quality related matters.
  • Balance the cycle time between each station so that utilize the performance of the production line based on TAKT time. 
  • Brainstorming on equipment/jig modification to improve the cycle time of each working station in order to improve productivity. 

process engineer

  •  Evaluate and improve tube manufacturing processes including secondary operations (saw and laser cutting)
  • Root cause daily production problems and advise on corrective actions.
  • Contribute to continuous improvement and cost reduction activities.
  • Prepare reports, charts and other documentation required for engineering records and projects.
  • Carry out Trials for new products.
  • Provide training of operators on new processes and procedures.
  • Provide assistance with the internal instruction of new equipment or processes.

process engineer

  • Support on three processes  (RLASC, RPDS and PRL2DB)
  • Inspect malfunctioning or damaged products to determine the root cause and problems.
  • Observe worker using equipment to verify that equipment is being operated and maintained according to quality assurance standards. 
  •  Investigate and observe tests on machinery and equipment for compliance with standards. 
  •  Write a technical reports or documentation , for use by engineering staff and operators. 

process engineer

  • Troubleshoot problems with chemical manufacturing processes. 
  • Inspection of patterns & their inspection reports.
  • Check the gauges of components.
  • Prepare Method Card of every new casting (contains all physical & chemical   properties of metal, sand, core, machining, methoding & work instructions). 

process engineer

  • Customer handling.
  • Production, Planning & Control of upcoming projects.
  • Pattern design and mould design (ProE).
  • Preparing 2D and 3D engineering drawings for production (AutoCAD).
  • Modifications on moulds.
  • Project planning and Documentation.
  • Check the patterns coming into the company premises.

process engineer

  • Establish departmental quality objectives, goals and targets 
  • Responsible to reduce wastage 
  • Improved the compounding formulations to reduce cost of production without compromising the product quality by higher loading of fillers combinations. 
  • Improved the compounding formulations to reduce cost of production without compromising the product quality by higher loading of fillers combinations 

process engineer

  • Responsible for planning of production activities of 17 types of products with 30 different counts in each types on daily, weekly, monthly and yearly basis. 
  • Consistently maintained on-time shipment record of 93% from 93% in 2017. 
  • Develop comprehensive employee training and development program to promote and document cross training, new employee training and orientation and safety awareness as per ISO standards. 
  • Plan production workflow for natural latex thread compounding 

process engineer

  • Review project design changes.
  • Make new model project happen.
  • Planning work assignments in accordance with worker performance, machine capacity, production schedules, or anticipated delays.
  • Analyze and improve production processes, manage inventory and support customer relationship management. 

process engineer

  • Ensure productivity efficiency 
  • Ensure External and Internal customer satisfaction 
  • Certified internal auditor 
  • Plan production overflow for natural latex thread extrusion consisting of 18 production streamlines. 

process engineer

  • Issued a mass balance study for Abu Ali GOSP. 
  • Contributed in Hazards & Operation study for Abu Ali GOSP. 
  • Contributed in Plant Capacity Adequacy Study for Abu Ali GOSP. 
  • To reduce 2nd choice and wastage