• Measure, cut, and/or thread various types of pipe.
• Install and fit pipes using wrenches, solvents, or soldering equipment.
• Dig and grade trenches.
• Lay and grade sewer pipe.
• Remove excess dirt from ground work.
• Hang and secure pipes using anchors, brackets, or straps.
• Assist in moving large, heavy pieces of material such as cast iron and concrete.

• Backflow prevention (Install and maintenance of RP and DCVA devices.)
• Installation of on demand units, gas water heaters and boilers.
• Water treatment (Water softeners, UV light systems, reverse osmosis.)
• Plumbing and heating service.

• Repaired and installed plumbing fixtures
• Installed pipes for water, gas, wastewater and sewage
• Handled the tasks of repairing and locating leakages and broken pipes
• Drilled holes in floors and walls to accommodate passage of pipes
• Assisted in fitting valves, pumps and systems by making use of hand tools
• Determined the position and place for pipes to be laid
• Sealed leaky faucet and check old pipes for repair and replacement

• Drainage to New homes/ Unit sites
• Rough ins
• Fit offs 
• Install appliances 
• Roll overs & hanging downpipes
• Stormwater retention systems

• Installed, assembled and repaired pipes and fixture of heating and drainage systems
•   Worked with various construction departments in plumbing works for new buildings
•   Handled the tasks of repairing and locating leakages and broken pipes.
•   Checked and fixed plumbing systems, detected leaks, and water fixtures.
•   Installed a new water heating system at the Plesetsk cosmodrome.

• Installation of new gas service 
• plumbing  
• digging in main lines 
• Repair gas pipelines 
• digging with shovels with caution to not damage any plastic pipes or any underground service that can be internet lines, water lines, and electric lines, etc. 

• Performed installations and repairs as a contractor for Duke University Medical Center. 
• Worked with General Contractors to install plumbing systems in newly constructed homes and businesses. 
• Responded to both normal and emergency customer service calls.
• Worked with a wide variety of materials and tools to ensure proper fit and installation of plumbing.

• Full service plumbing, sewer drain cleaning.
• Sewer repair & service.
• Toilet replacement & repair.
• Water heater installment & repair.
• Gas line replacement.
• Garbage disposal.
• Copper repiping.

• Fitting and repairing taps, rowans and down pipes
• Installing and repairing domestic kitchen systems
• Installing heating and solar panel systems
• Repairing pipes, sinks, baths, basins, etc.
• Explaining the system’s user manuals to customers and clients
• Advising clients on the best products to suit their needs
• Provided aftercare and future sales advice to clients 

• Cape Breton island housing authority- Plumbing and heating contracts.
• Maintenance of plumbing and heating systems.
• Sewer augering, jetting and camera scope.
• Main water and sewer line replacement. 
• Hot water boiler and warm air furnace installs.
• New home construction. 
• Well pump installs and service.

• Assisting my employer, which consisted of organizing and maintaining any equipment needs that were vital to executing the required job. 
• New high rise buildings 
• New houses and duplexes
• All types of maintenance plumbing 

• Maintenance or installing hot water tanks
• water line leaks
• toilet repairs
• faucet repairs 
• basic plumbing isuues

• Tests plumbing systems for leaks and other problems
• Analyses problem and identifies appropriate tools and materials for repair
• Follows health and safety standards and complies with building codes
• Assists with inspections of plumbing systems to identify and replace worn parts

• Identify plumbing and safety problems
• Cut, assemble, Install gas and water pipes and fixtures such as sinks and toilets
• Replacing showers deverters 
• Communicates with contractors, construction workers, electricians, pipe fitters, and steamfitters in installing and repairing plumbing

• Learning map layout for pipes, drainage systems, and other plumbing materials
• Assists with pipes and fixtures, such as sinks and toilets, for water, gas, steam, air, or other liquids
• Supports for pipes, equipment, and fixtures prior to installation
• Assembles fittings and valves for installation
• Modifies length of pipes, fixtures, and other plumbing materials as needed for a building
• Uses saws and pipe cutters as necessary
• Installs heating and air-conditioning systems, including water heaters

• Use math to figure out distances and location of pipes
• Clean and take care of messes we create
• Track and order stock
• Manage multiple tasks
• Optimize time to complete task in at a timely rate

• Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines. Locate and mark the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels.
• Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks. Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment.
• Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks or toilets, using hand or power tools, Cut openings in structures to accommodate pipes or pipe fittings, using hand or power tools.
• Clear away debris in a renovation, Plan pipe system layout, installation, or repair, according to specifications.
• Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods, Select pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications.
• Measure and mark pipes for cutting or threading. Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
• Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders. Remove and replace worn components.

• maintaining space heaters and replacement space heaters.
• tap-ware repairing and replacements.
• Unblocking drains and repairs, ranging from small work like trap repairs to replacement of the main line to the mains.
• repairs and replacement toilet suites.
• repairing water leaks to replacing the whole water service
• reparing gas leaks to replacing the whole gas service.

• Doing most of the princesses plumbing
• Wanting to eat
• Saving the princesse from an oversized fire-breathing turtle
• Assisting tradesman with installing pipes

• Install, connect, and adjust thermostats, 
• Adjust system controls to setting recommended by manufacturer to balance system, using hand tools. and timers, using hand tools.
• Handled multiple Serivce calls a day.
• Trouble shoot and diagnose problems.

• Worked in the Meriton appartments
• Measure and cut PVC pipe on site
• Mark and measure basements using a lazier and tape measure
• Drill out all the holes using a hammer drill, installing the rod and clips for PVC
• Measure and marking out channeling for copper
• Drill all the wholes using a hammer drill for the rods and channeling 
• Ensuring the pipes were straight 

• Required: Allegheny County Journeyman’s  Plumbing License
• ASSE 5110 Testers Certification in Backflow prevention
• Testing and repair of various types and manufactures of Backflow equipment
• Installation and repair of all heating systems for domestic hot water and swimming pools
• Installation and repair of all swimming pool equipment and related systems
• Installation and repair to all domestic water service , waste and vent, pluming fixtures and appurtenances  in the plumbing systems.
• Managing of materials, timing of repairs,additional Trades or Staff requirements and emergency repairs.

• Install water softeners, pressure regulators, toilets, faucets, and water heaters.
• Perform repairs, re-routes, and re-pipes.
• Hydro-jetting of sewer lines.
• Use sewer machines to clear sewer line.
• Worked with commercial companies/ and insurance companies.
• Sell and upsell  products and service.
• Gave estimates.

• Working on all aspects of domestic plumbing on a freelance basis
• Installing and maintaining domestic hot and cold water systems
• Installing washing machines, dishwashers, cookers, etc.
• Servicing gas boilers (including aftercare and follow-on appointments)
• Detecting and locating leaks in pipework and carrying out repairs
• Inspecting domestic appliances, pipes and electrical systems for problems
• Fitting bathrooms (from the initial design to the final fitting of the bathroom) 

• Supply and install warm air and hot water heating systems.
• Installation of steel and fiberglass oil tanks.
• Service and repair of oil burning equipment.
• Use of testo combustion anylyzer and Bacharach smoke test.
• Plumbing and heating renovations.
• New home construction

• installing and maintaining evaporative coolers and ducted heaters, also helped install split systems throughout these years.
• maintenance plumbing work E.g. replacing tap washers, water leaks, burst hot water units and unblocking drains.
• installation and maintenance to solar hot water systems.
• installation of wood heaters and gas log heaters.
• renovations to houses and have done a few local restaurants altering gas, water and flues.
• changing septic tank systems to sewer mains.

• Cut openings in structures to accommodate pipes and pipe fittings with [Tool] .
• Crafted piping, including measuring, threading and cutting materials to correct angles.
• Accurately measured piping, cutting to fit where needed.
• Selected type and size of piping required for each project.

• Liaising with Builders and subcontractors 
• Reading of plans and setting out work
• Ordering and accepting materials
• Supervision of tradesmen and apprentices 
• Keep records of works completed  and produce reports.
• Ensuring that workers follow appropriate safe work methods 

• Install sewerage, stormwater drainage and services pipework to the specified grade and alignments.
• Install concrete structures including manholes.
• Monitor and assist with trench excavation for installation of pipework.
• Operate in a safe manner and identify safe working conditions.
• Adhere to quality, safety and environmental policies of company onsite.

• Install hot water systems and gas systems.
• Rough ins.
• Fitting off bathrooms and commercial food preparation areas.
• Maintain a clean, tidy and safe workplace.