mechanical design engineer Archives

Heat load calculation using carrier HAP Software with ASHRAE standards.
Air Distribution Duct design following SMACNA, Selection of Diffusers, Grilles G.I sheets etc.
To prepare Selection of machines like Packaged Units, Fan Coil Units, Air Handling Units, Chillers and Pumps etc. on the basis of heat load calculation from respective models like YORK, CARRIER and TRANE.
Calculation of Chilled Water Pipe Sizing (McQuay Software) Calculation of Ventilation and Pump.
The Static Pressure Calculation for selection of AHU Fan capacity using Elite Duct Sizer Software.
Preparation of Shop Drawings and Design Drawings.
Head Loss Calculation for selection of Pumps in Water Supply, Firefighting and Chilled Water.

Designed Various Mechanical Components for Automotive and Electronic Industries such as brackets, shaft, sleeve, mountings, jigs, fixtures and various assembly using UG-NX
Developed engineering production drawings and assembly layout drawings to match customer specifications with effective use of GD&T symbols using UG-NX
Solid Modelling and detailing of product design and Analysis & Design optimization.
Responsibility was to design, build and manage the innovative solutions that enable high performance.

Sheet Metal Design.(Swept walls/creating stamps/Extruding/bending etc.)
Interact with internal resources and vendors to support prototype fabrication, assembly and validation testing.
Design and Fabrication of Mezzanine Floor for Monsanto Seeds pvt ltd.
In house Fabrication and supply for Skoda Auto Pvt Ltd.

Worked with product planners and industrial designers to conceptualize and refine product concepts.
Created parts for various fabrication methods, including machining, sheet metal fabrication and injection molding.
Used AutoCAD, Creo, Solidworks, Nx Unigraphics to examine product scopes and plan for adaptations in production methods.
Supervised production workers to determine problematic areas and implement solutions for optimized production.
Generating test fixtures and protocols for quality testing of the product.

Assist in developing the structural design of products using drafting tools or computer-assisted design (CAD) or drafting equipment and software.
3D (Computer Aided Design) CAD Software.
Modelling ,assembly, drafting and detailing of running projects.
Complete Assigned Tasks Within Time and Cost Restraints.
Convert Basic Design Info and Requirements Into Working Drawings.
Material Procurement and Quality inspection of outgoing projects.
Design and detailing of Special Purpose Machines in software Tools.

Design products as per customer requirements. Conceptualize the products on software and develop prototype.
Direct or coordinate activities of engineering or technical personnel involved in designing, fabricating, modifying, or testing of mechanical building services projects.
Design, draft, analyse and quantify all mechanical building services,i.e HVAC, Fire protection and Plumbing.
Manage all mechanical engineering projects.

Designed components of automated twisted and wrapping machines that conform to buyer expectations.
Created product design with parametric standards.
Assigned to the tasks of planning and providing guidance to staff in areas of mechanical design development.
Analysed problems and offered mechanical solutions to existing problems.

Design voluminal and surface mechanical parts on CATIA V5.
Offer multiple technical solutions to our customers to help them have control models that are easy to use and simple to manufacture.
Design validation dummy “Cubing” for paneling, mechanical parts or assemblies.
Constructions of complex assemblies on CATIA V5.
Reconstructions of complex mechanical parts from a scatter plot of CATIA V5.
Design of carbon fiber vehicle prototypes on CATIA V5 while designing their negative mold.
Machining preparation for complex mechanical parts.Clients

Write performance requirements for product development or engineering projects. computer-generated reports.
Hands on experience in using CAD to create part models, Assemblies & detail drawings as per standards.
Accomplished proficiency in using GD & Tapplication with detail specifications as per ASME Y14.5.
Detail Drafting, Layout using AutoCAD & finalreview of drawings,Bill of Materials (BOM) for Assembly.

Generating 2D into 3D models based on concepts outlined.
Creation of assemblies and sub-assemblies and their drawings
Provide feedback to design engineers on customer problems or needs..
Handled Engineering change orders

Design Cast resin transformer for dry type
Create new design 2D & 3D drawing for Customer review
Solve the existing design’s problems with new design arrangement
Handled Design Project from TNB, SESCO,SESB, PETRONAS etc.
Prepared repeat standard design Transfomer for customer review
Design busduct arrangement enclosure follow as customer specfication guide
Solved the problems when there are some mistake in the drawing to make sure the production can produce without any misunderstanding in the drawing

Read and interpret blueprints, technical drawings, schematics, or computer-generated reports after receiving the job order for a certain project which includes the sending the valuable information related to the material purchase specification to the procurement.
Do calculations for the principle main part and the accessory parts.
Mechanical design tasks.
Interpretation and application of ASMI Code for pressure vessel and the compliance of the pressure vessel designs to it.

Responsible to understand Customer’s requirement present their store layout into 2D as well as 3D.
To ensure feedback about the designed layout is taken from the customer.
Continuously make improvements in my designing skills with the changing scenario of designing world.
Provide Cost Estimates for Materials, Equipment, and installations.
Research Materials for Future Design Opportunities and Usage.
Ensure Designs Meet Legal Guidelines and Safety Requirements.

Working as a Mechanical Design Engineer from last 13 months on Uni-graphics NX computer aided software.
Responsible for planning, organizing and implementing various new design concepts of LED Bulbs & Tube lights, Emergency Lights, Solar Lights and Torches on 3-D softwares.
Proficient in Plastic product designs, sheet metal designs and Injection mould designs on Uni-graphics NX 10/11
Simulating designs to static and dynamic loads, representative to the real-life usage of the product.

New Products and parts design/development
Develop product structure design proposals
Follow mold development process and validation
Participant feasibility study and concept proposals
working on different type of Testings like thermal analysis, Environmental testing , vibration testing etc.

Designing and detailing of structural steel members such as beams,braces,columns,trusses,handrails,stairs, ducting and storage tanks using CAD software .
Liaised with customer’s representative regarding design revision and change that are to be incorporated with the shop drawings.
Prepares weekly schedule and drawing submission dates and verifies that all accomplished drawings are accurate and conforms with standard engineering practice, before submission to customer for final approval.
Makes erection procedures and checks for crane loading data and its effective working radius for safe installation at site.
Visits job site to check on site non-conformities and makes as built drawings.

Design and reverse engineering of mechanical (elastic, plastic and metal) parts using CAD software specially SolidWorks and beside that using Catia and Inventor.
Making shop Drawings and BOM list. Set geometrical and dimensional tolerances in drawings.
Test prototypes and optimizing mechanical parts to save money and raising lifetime.
Troubleshoot new or existing product problems involving designs, materials, or processes by negotiating with other departments.
Using ASME and ISO standards to ensure Lifetime and safety.
Keep and archiving technical documents.
Purchase engineering while Keep track of the orders of engineering units to purchase the parts and devices to meet requirements.

Making PID drawings for DESALINATION PLANT.
Making pipe routing for DESALINATION PLANT.
Drawing 3D equipment or pumps …etc.
IABG Acentiss – Electra One – design of composite wing and the fabrication tooling.

Responsible for providing systematic design and development verification and validation of 3D drawings to mitigate design flaws, using AutoCad, CAMWorks and Solidworks.
Oversaw development of mechanical design drawings, documentation, and associated electronic data output files used for production and procurement undergo a comprehensive verification and validation review for design for manufacturing, data integrity, quality, dimensional tolerances and consistency.
Validated mechanical drawings, CNC files, BOM and prototype-based designs for form, fit and function to client specifications while conforming to Array standards, and industry specification.
Worked closely with pre-production and assembly departments to ensure that prototypes satisfy the DFMA criteria and are manufactured in a timely manner.
Coordinated with Development Planner and Project Managers to ensure that the project scope is accomplished on time.
Conducted finite element analysis(FEA) on metal and acrylic based fixtures. The data was then used to evaluate the product rigidity and predict life span.