maintenance engineer Archives

Design maintenance strategies, procedures and methods.
Carry out routine maintenance work and respond to equipment faults.
Diagnose breakdown problems.
Fit new parts and make sure equipment is working correctly.
Carry out quality inspections on jobs.
Control maintenance tools, stores and equipment.
Monitor and control maintenance costs.

Compiled and evaluated statistical data to determine and maintain quality and reliability of products.
Prepared charts, graphs, or diagrams to illustrate workflow, routing, floor layouts, material handling, or machine utilization.
Evaluated data and wrote reports to validate or indicate deviations from existing standards.
Observed workers operating equipment or performing tasks to determine time involved and fatigue rate using timing devices.

Products installation
Customer training on product
Customer training on software 2D units
Customer initial training on 3D software
Products troubleshooting and maintenance
Software network linkage for multi-clinics
Vcare tickets handling

Mechanical Maintenance responsibilities include reduction of the breakdown in all equipment by properly undertaking the maintenance of machinery in a systematic way with effort and team work
Leading a work force of highly skilled foremen, technicians and other experts to ensure maintenance and workshop activities
Adopting Preventive Maintenance Schedules for all equipment and periodic checking of Machinery
Prepare and send the preventive/predictive & corrective activities held in the maintenance division to all the concerned authorities on daily basis
SAP-ERP application in maintenance department, viz. preparing maintenance orders for breakdown & preventive maintenance activities, maintenance notifications, purchase requisitions, material reservations etc
Efficient planning for preventive and predictive maintenance activities for all critical equipment’s in the plant by routine inspection and monitoring and organizes in conjunction with the production plan
To execute / plan activities in order to keep the breakdown of equipments and machineries below the budgetary target for the three rolling mills and a wire rod mill situated inside the organization

Responsible for maintenance of soap and fatty acid plant. Was the only engineer sent from the company to ITLAY for training on new soap line. Installed & commissioned successfully
Carried out minor&major machinery breakdown
Repaired travelling hopper as an industrial training project
Rm 500

Attending the breakdown of heavy fabricating machinery.
Attending the hydro pneumatic, pneumatic and hydraulic machine breakdowns.
Preparation and presentation for ISO audits. (Health and Safety)
Drawings and documentations updates.
Ensuring the all equipment is working smoothly.
Observed and monitoring HT & LT Breaker.
Operating DG Set.

Followed safety procedures to avoid injuries in field.
Identifies and captures opportunities for improvement in equipment maintainability and reliability.
Adapt maintenance tools and procedures to improve equipment utilization and reliability, and minimize service quality incidents.
Maintenance of marshalling panels of generator transformer.

Inspect machines and observe operations to ensure proper working of machines in plant.
To design and ensure proper safety standards.
Prepare specifications for purchases of machine or equipment.
Perform detailed calculations to compute and establish manufacturing, construction, or installation standards or specifications.Develop or implement policies, which is needed for the expansion of production line.
Plan and establish sequence of operations which need to be followed for preventive maintenance of machines
Assemble parts or products and to promote efficient utilization of resources which are provided by company.
Estimate production costs, cost saving methods, and Implement modifications in machine as needed.

Comply with all applicable codes, regulations, governmental agency, and Company directives as related to building operations and practice safe work habits
Troubleshooting of Robotic Automation Warehouse and its maintenance.
Project planning and Execution.
Cable scheduling and testing.

Working as a Senior Engineer in Maintenance Department (utility, Robotic warehouse) handling two major units. To monitor all Energy conservation activity.
To monitor and maintain Lead and Lag KWH, PF as per the new MSEDCL rule.
Monitoring and supervision of substation (HT/LT).
Scheduling and planning maintenance for the breaker (HT/LT).
Maintaining the Load factor and Maximum Demand given by the Maharashtra electricity board.
High proﬁciency with condensation systems, cooling towers.
Planning schedule for maintenance work for air compressors, Genset, Chiller and AHU, pneumatic, Fire hydrant system, etc.

Responsible for maintaining the functionality and appearance of a large multi asset residential and hospitality complex in addition to operating the technical systems servicing the property
Review and analysis of the monthly KPI criteria submitted by the maintenance contractor
Incorporate all the technical services viz. HVAC, Mechanical & Plumbing, Water Treatment, Civil, Electrical, Telecommunications, Fire & Safety, and Kitchen & Laundry and assuring the client satisfaction
Weekly meeting with the service personals representing the client and prepare the minutes
Regular inspection of the infra-structure & technical rooms and raise the work orders for corrective maintenance on daily basis
Part of the team for the implementation of the asset management system MAXIMO for the efficiency improvement and cost reduction

Inspect buildings, grounds, and equipment for unsafe or malfunctioning conditions, preventative maintenance
Inspect new installation for compliance with building codes and safety regulations
Maintain and operate life safety and fire systems
Perform welding, carpentry, and snow removal when necessary

Responding to request for mechanical and electrical problems.
Carrying out planned maintenance.
Preventive maintenance of refrigeration and AC equipment
Carrying out routine checks and logs of the status of Air conditioning and refrigeration
Making Requisition for materials required for system
Assist in verification of spares purchased
Overhauling and replacing parts according to schedule

Assist with troubleshooting and repairs of buildings and installed systems to include: packaging and handling machinery, plumbing systems, kitchen equipment, roofs, drains, shop, and grounds equipment
Clean, lubricate, and service a wide variety of pumps, valves, pneumatic controls, electrical, mechanical, and hydraulic devices
Assist with installation and modification of building equipment systems
Replace and repair building finishes such as ceiling tiles, door hardware, wall paper, and can touch up paint in common areas
Troubleshoot, evaluate, and make recommendations to upgrade maintenance operations and/or implement savings opportunities
Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance
Respond immediately to emergency situations and customer concerns.

Leading the execution team (Aramco and contractors) for multiple T&I projects and managing their day to day activities
Ensuring all projects are completed safely, on time and within allocated budget.
Working with and between other teams (Inspection, Technical Support, Engineering and Loss Prevention) to ensure a successful execution
Completing 36 projects equal to 26 % of 2017 total projects
Delivering 92% of all projects on or ahead of schedule with no safety incidents with a cost saving of ($150,000)
Developing a tracking system to track all project’s duration and cost

Equipment and component replacement and technical refreshes
Initiated project management knowledge study and subsequently standardized project management practices
Improved methods for measurement, documentation and work flow management
Troubleshot electrical equipment problems such as electro-valves and sensors

Carry out daily machine inspections on tufting machines, backing machine, shearing machine and other machines which use to manufacture carpets.
Analyzing and rectifying if there are any problems given by the machines.
Carry out routine machine services according to the appointed date. (eg, Changing the lubricant oil, cleaning the blades in the tufting machines, replacing new parts and components which had been wear out, etc.)
Repair & modification on particular machines which has a lot of problems and to improve the efficiency of the machines.

Confer with engineers, vendors, or others to discuss existing or potential engineering projects or products.
Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards., or others to discuss existing or potential engineering projects or products.
Conduct field surveys or study datasheets, online MCMS data, diagrams, or other data to identify and correct electrical drive problems.
Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electrical drives performance for harmonic analysis.
Participated in the FMEA study of 35MW LCI synchronous drives for improving the reliability.

planning and undertaking scheduled maintenance
diagnosing faults
obtaining specialist components, fixtures or fittings
creating maintenance procedures

Successfully completed the work in maintaining department from wheel balancing to the servicing and the solution of small engine related problems i.e. rack and pinion and engine work including the small interior problem
Mentored junior worker and new hires to better improve competency and efficiency of all staff.
Green initiatives and environmentally friendly equipment optimization
Mentor ship, coaching, and team-building for peers and junior personnel

Preventative maintenance planning and scheduling
Team collaboration across multiple cross-functional areas
Equipment monitoring, analysis, diagnosis, and repair
Troubleshooting and problem-solving in a complex environment
Parts and supply ordering and inventory management
Corrective and reparation maintenance operations
Cost control and continuous process improvement

Completed audit related civil maintenance work with good quality.
Monitored team of around 60 personnel during construction activities for compliance with health and safety requirements.
Supervised and monitored daily tasks of 5 subcontractors.
Recorded daily events and activities in site diary to evaluate process and improve productivity.

PLANNING AND UNDERTAKING PREVENTIVE MAINTENANCE
UNDERTAKING BREAKDOWNS
COMMISSIONING PLCs AND INSTALLING NEW MACHINERY AND EQUIPMENT
DIAGONISING FAULTS
SUPERVISING TECHNICAL STAFF
PURCHASING MACHINE AND MAINTENANCE RELATED EQUIPMENTS
CREATING MAINTENANCE PROCEDURES

maintenance engineer in KIA franchise Suez branch maintain vehicle
Drafting technical requirements by using energy management system for proper balancing of building
Scheduled the time frame for delivery and updated all the purchase orders.
Assisted the Facility Operations department and managed the budget.

Planning and undertaking scheduled maintenance for the track maintenance machines.
Repairing track maintenance equipment.
Managing replenished plans for the required spares.
Managing stocks of supplies and equipment.
Coordinate with other professionals, such as contractors, engineers, and operators to ensure job success.
Sort materials, such as spare parts, lubricants and workshop equipment.
Supervise workers in the inspection and maintenance of equipment to ensure efficient and safe equipment operation.

Spearheading the process of optimization and providing quick win solutions to decrease manual effort and increase service quality through automated tool or designing well step process.
Designing & developing Ladder Logic, SCADA Scripts and various AC &DC Drives tuning through advance development and coding techniques.
Piloting multiple phases of maintenance of Mechanical Hydraulic Horizontal Extrusion Press (1460 ton, 1800 ton & 2500 ton), Electrical and Electronics Panel Design, Installation & Ladder Logic Programming through testing, integration, implementation & deployment.
Driving utility maintenance for Cooling Tower, Compressor, DG Generator, EOTs, Die-shop& Tool Room.

Manage all data center applications and operate various centrifugal chillers and install and maintain dehumidification systems and oversee al maintenance activities for various technicians
Maintain and perform repair on all refrigeration equipments and perform troubleshoot on all HVAC equipments and perform repairs all coolers.
Scheduling of preventive & breakdown of mechanical maintenance
Basic knowledge and maintenance of HVAC SYSTEM (BMS) likes AHU,DEX,VAC DEHUMIDIFIER, HUMIDIFIER
Preparation of documents for regulatory

Operation and Maintenance of Transformers, MV Panels, Distribution boards, Control panels, Diesel Generators, UPS, Elevators, Lighting and Power system, HVAC system and Kitchen Equipment
Operation and maintenance of Fire alarm and Fire fighting System
Operation and Maintenance of ELV System
Performed regular checks on the buildings and pools.
Facilitated in the overhauling of AC, plumbing and electrical equipment.
Handling responsibilities of planning preventive maintenance for various projects
Prepared Auto Cad drawings for the various facilities project such as renovations and new constructions

Responsible for maintenance of spares required for manufacturing equipment & ordering with the help of stores as & when required
Responsible for NC/CAPA management of Maintenance Engineering
Responsible to assure that engineering department is appropriately run in safe, clean and environmentally sound manner.
Develop or implement programs to improve sustainability

Manage the coordination and overall integration of technical activities in engineering base business.
Engages in execution of engineering maintenance program designed to ensure uninterrupted production consistent with established standards
Engages in execution of Validation activities of machine improvement projects
Improves the efficiency of operation through the use of Lean principles and process excellence
Partners with operations in the investigation / correction of process failures
Participates in audits and gap assessments in support of the internal audit program and FDA readiness
Responsible for procurement and assessment of engineering spares from reliable and approved source

maintenance engineer

maintenance engineer

senior maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

senior maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer (on contract)

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer

maintenance engineer (utility)

maintenance engineer

maintenance engineer

maintenance engineer