junior engineer Archives

Updating production report&kpi.
Updating loss time.
Manpower supervising.
Heijunka production system &sap.
Why why analysis of rework & rejected part.
B2B system.
Training to operator.

Manage preventive, predictive and breakdown maintenance of various machinery and equipment including breakdown analysis and reporting.
Maintaining Record of each Equipment in every aspect such as performance, service record, fuel record, warranties, permits etc. to achieve productivity, fuel efficiency and quality output.
Leading the teams of technician assigned to the task.
Ensure all logbook and departmental record are effectively maintained to enable stock control, ordering of parts and all other workshop functions operate efficiently.
Budget preparation and control for mechanical maintenance.

Fix issues and maintain round the clock efficiency of the network by attending to the clients.
Router configuration and maintenance of various communication equipment in exchange
Switch maintenance of TAX and local exchanges. Provision of PCM lines.
Line out making of the building.

Understand the drawing and complete the manufacturing within time limit.
Operating the plazma 260XD cutting machine
Well knowledge of autoCAD
Management team (PM Schedules and records,Shift reports, check-lists, Operating procedures etc.)

Supervision of Substation and Distribution system erection works.
Planning and co-ordination with site engineers and higher authorities.
Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards (Joint Measurement Certification) and erection billing.
Cable laying, labeling and termination in kiosk and panels as per cable scheduling.
Hands on experience in preparation of BOQ and the project closure documentation works.

LT AB Cable, Electronic meter work execution.
Pressure monitoring in clean rooms.
Follow up of the Preventive & breakdown maintenance job orders.
Timely updating statutory documents and record keeping.

Installation Testing & Commissioning of Three phase Transformer, LT ABC Cable.
Erection of 11 KV Outdoor Substation with Control & Protection Equipment like Isolators, DO Fuses, Surge Arrestors etc.
Maintenance of overhead line & Controlling L-T, Cable & H.T Cables
Supervision of Transformers and associated outdoor equipment Erection, Testing and commissioning

Updating all P&ID drawings, block layouts, site layout and required project drawing.
Updating the project drawings as per requirement for user department.
Updated the Preventive maintenance as per schedules.
Installation of the new equipment’s as per user requirement.
Handling of Projects works as per production requirement.
Able to install sprinkler systems to blocks, storage areas, etc.,
Coordinating the fabrication team for better performance.

Was involved in site grading work for Indian Iron and Steel Company, Burnpur, for their new plant.
The next posting was in Uran, Mumbai, for C2 – C3 expansion project of ONGC.
Ensure quality execution as per the design standards, Preparation of Project progress reports.
Monitoring and evaluation of Contractor’s job quality and progress.

Designed websites and web applications for several organisations using HTML, CSS and JavaScript.
Designed websites for several organizations on the university campus.
Refactored legacy systems and introduced Test Driven Development to the development life cycle.
Coached interns on best practises in programming and also in version control
Promoted to Lead Junior Developer and recognised for ability to get a team to work together and produce timely results.
Solely responsible for the validation of the websites of all organizations on the university campus.
Design and implement web site security measures such as firewalls or message encryption. needs, resolve conflicts, develop content criteria, or choose solutions.

Survey of HT, LT Lines.
Preparation of detail design of LT and HT Circuits.
Pole Erection and Stringing of Distribution Overhead Line up to 11 KV lines.
Preparation of cost comparison sheet for all suppliers & Sub-contractors offer.
Site execution of project with safety, planning and execution.
Site Co-ordination, Execution of work as per the Design/Drawing & Quality.
Material management, analysis of material status.

Drafted and detailed all drawings for tender, fabrication, assembly and erection/installation.
Performed all necessary drawing conversions required by customer such as pdf files, tiff, jpeg and dwg/dxf file.
Revised, tracked and reviewed new and existing drawings and organizing technical documents.
Coordinated and liaised between production, manufacturing and purchasing personnel with all necessary documents and inquiries.
Involved in product standardization.
Checked and finalized all drawings for issuance.
Attends inspection to new purchased item or item before shipping to customer.

Maintained Handler such as Seiko Epson NS-60XX, NS-70XX, NS-80XX, Hon Tech HT-7045, HT-9045, Multitest MT9510, MT9918, MT9928, Delta Castle, Delta Summit.
Maintained Tester V93000PS, V93000PSRF
Checked and updated handler spare parts.
Conducted training technician and operator for machine use and minor troubleshooting.
Led technician for maintaining yield and machine status.
Participated in yield and machine improvement with superiors.

Looked Maintenance of of CBL FLUIDISED BED MULTI FUEL WATER TUBE BOILER with 30TPH capacity at 44 Kg/Cm2 pressure.
Looked Maintenance of LP&HP Dosing Pump, ID&FD Fan, Rice Husk Belt Conveyor, Screen Vibrator, Fuel Feeder, RALV , Ash Handling of Pneumatic System, Boiler Water Feed Pump (KSB), Economizer, Air Pre-Heater, ESP, Deaerator, Cooling Tower, Ash Screw Conveyor.
Maintenaned SIMENS made BACK PRESSURE STEAM TURBINE with 2.2 MW capacities.
Looked Maintenance of “GRAIN SPIRIT PLANT & Molasses Plant” of 80 KLPD.
Looked Maintenance of Charging Section, Liquification Section, Fermentation Section, Distillation Section, Decanter Section, Water Ring Vaccum Pump, Air Blower(PPI VW-400, PPI VW200), Vertical Rotor Hammer Mill, Destoner, Bucket Elevator, Pre Cleaner, Sieving Machine, Screw Conveyor, En-Mass Conyeyor, Plate Type Heat Exchanger, Mechanical Seal, Pneumatic Gate, Agitator, Sparger.
Looked Maintenance of Reciprocating Compressor ( HXIT 15NP, 20NP & 30 NP of CHICAGO PNEUMATIC.

Evaluation of tender, preparation of specification for electrical equipment as per IS & IEC standards.
Preparation of order.
Inspection of material.
Inventory Managament.

Communicated with the public and various agencies affected by upcoming construction projects.
Conducted weekly status update meetings with contractor and inspectors to update lead CM; addressed RFIs and submittals.
Produced cost estimates for work to be performed, detailed location maps using ArcGIS, and filled out engineer’s section of LMRC survey reports.
Typical work week included 6 8-10 hour days.

Release new connection under jurisdiction PGVCL (i.e. LT or HT).
Monitoring, controlling and effective steps for reduce debit arrears.
Provide assistance for customers with special complain.
Preparation of tenders for purchase of various type of electrical material for distribution network.

Work related to distribution network (i.e. to Monitoring, Controlling, & reduction of T&D and AT&C losses).
Energy Auditing.
Vigilance activity.
Preparation of estimate for new connection and system improvement work.
Surveyed work.
Measurement of line and Transformer Center erection work.
Supervision of maintenance work of distribution sector up to 11 KV.

Set Out, Level And Survey The Site
Check Plans, Drawings And Quantities For Accuracy Of Calculations
Ensure That All Materials Used And Work Performed Are In Accordance With The Specifications
Oversee The Selection And Requisition Of Materials

Member of Industrial automation team
Went on site visit at STATE LOAD DISPATCH CENTER(SLDC), JABALPUR, M.P and NOIDA POWER COMPANY LIMITED (NPCL), NOIDA.
Collected data of the total power generated from wind turbines at different location in M.P and stored them at SLDC for their record.
Act As The Main Technical Adviser On A Construction Site For Subcontractors, Craftspeople And Operatives

Site Execution& Quality Control,
Checking the All Civil Related Works
Verify & Certify Sub Contractor Bills.
Preparing material inward and outward register
Prepare &Submit Ms Reports
Coordinate Architects,&Structural consultants
Coordinate to sub Contractors & vendors

Responsible for power distribution system installation, operation & maintenance, testing & inspection of 11 Kv line to last mile consumer
Lay cable and hook up electrical connections between machines, power sources, and phone lines.supply including distribution transformer, O/H Line, U/G cabling, metering, Billing and Collection etc.
In-charge of handing public complaints.
Management and control of recruitment for apprentices at Punjab State Power Corporation Limited organization.

Conduct, estimate and supervise the installation and operation of electrical equipment and systems such as distribution transformers with structure, LT/HT lines.
Plan layout of electric power distribution lines or stations.
Confer with engineers, customers, or others to discuss existing or potential engineering projects or products.
Monitor fault detection in distribution system.
Manage material, prepare or maintain operational records and documentation.
Superintendence of maintaining distribution system.
General public related works such as releasing new domestic electricity connections, non residential electricity connections, agricultural power connections, industrial connections and other applications and requests.

General Safety Awareness/ Tool Box Training taken to subordinates workers including contract workers .
Proper planning of Shift by CR Stock to be maintained and make plan with S/I shift wise.
Proper Filling and maintaining all the shift records in respective shift
Improving Productivity of Line in respective shift
Managing shift work of galvanizing line as a shift engineer.
Manpower handling during day to day operation work of shift.
Material balancing (GI to GR) in SAP for all the shifts.

Involving in all the construction activities from Excavation to the Roof concreting.
Preparation of Bar Bending Schedule (BBS).
Co-ordination with vendors, inter departments & Client for development of Project as per schedule.
Making Contractor’s Bill.

Trouble shooting of wind turbine generators(WTG).
Maintenance of wind turbine generators(WTG).
Maintain the all the reports like Daily,Monthly,Yearly generation reports,Break down reports,Material consumption reports,Sap orders,break down Analysis,Attending major breakdowns,Maintenance Analysis reports etc….
Handle the shift in site which is having 133(1.5MW) wtgs.

Resolved issues with construction with knowledge of principles and real-world
Studied corrections from senior engineers to learn and grow as a professional.
Consulted with other disciplines and clients to resolve issues in a timely and
effective manner.

Maintain records of all expenses incurred for the constructio n work, such as raw
material used, transport, various daily operations cost, and other logistic expenses.
Monitoring structural and finishing works.
Testing of all construction materials and submitting the Test report to Project
Manager.
Preparing Daily report about the status of project.
Surveying everyday activity and preparing the quantities of area.

Plan,Research, design, evaluate, install, and maintain mechanical products, systems and processes to meet requirements, applying knowledge of engineering principles.
Preparation of Daily Maintenance Check sheet for Operator.
Kaizen Team Member.
Maintain 5-S, EHS system in Assembly Shop.

In TAML inspecting composites parts through C-scan and A-scan and Radiography
Inspection of AIRBUS 350 parts like Aileron, trailing edge, lower and upper panels.
Inspection of BOEING 787 & 737 parts like edge frame, tail cone, APU door.
Inspection of CHINOOK HELICOPTER parts like ramp skin etc.