Andrew Smith

Phone:

(000) 000-0000

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Hello

I have worked for 35 years now and have been lucky enough to experience many varied work situations.
From major industrial projects to the routine maintenance and breakdown of plant.
I am continually motivated by the nature of the challenge and use my experience to achieve good outcomes.
I believe I’m pragmatic and patience and would like to lead a group some day.
Throughout my career I have always worked within a tight knit team and have enjoyed the lifelong friends made. I can bring energy to a group but also have a calming effect when required.
I keep physically fit doing various sports throughout the year and find it essential to my overall well being.

Employment history

Oct. 2018 – Present
Lake Ezekiel, Connecticut

Instrument Technician, Stoltenberg and Sons

I am employed by Calitec Pty Ltd who provide Instrumentation maintenance services to Pharmaceutical company’s Zoetis & CSL in Parkville. My main responsibilities is lead Technician and planner for all process instrumentation for Zoetis Pty Ltd.

Conduct or supervise the installation and operation of electronic equipment and systems.
Educate equipment operators on the proper use of equipment.
Prepare or maintain design, testing, or operational records and documentation.
Replace defective components or parts, using hand tools and precision instruments.
Repair, rework, or calibrate hydraulic or pneumatic assemblies or systems to meet operational specifications or tolerances.
Analyze and record test results, and prepare written testing documentation.
Install electrical or electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.

Oct. 1996 – Sep. 1998
Dexterton, Wisconsin

Shift Instrument Technician & Operator, Adams-Beer

Permanently employed with CSL on a rotating 12hr shift, 4 days on 4 days off (2 days then 2 nights ). My role was instrument Technician
and duties included routine plant calibration, attend to breakdowns, and provide coverage of plant operation in conjuction with the shift Engineers.
CSL Bioplasma is a blood plasma processing company and our responsibilities were to monitor and operate plant consisting of
*Steam Boiler plant
*Clean in place CIP stations
*Chemical tank farm
*Large volume Air Handling Units
*Autoclave and Freeze dryer machines
*Pure water systems WDI & Pyrogen free
*Compressor based Brine cooling systems
*Warm & Cold rooms and Freezers Cryo/refrigerated

Nov. 1987 – May. 1990
South Cristobal, Utah

Instrument Technician, Streich, Kreiger and Feest

Started my 4 year Instrument apprenticeship and eventually employed as an Instrument Technician.
Duties included routine maintenance, calibration and repair work for Melbourne’s water supply and sewerage plants. Also extensive new installation and commissioning projects which included
*Brooklyn pumping station upgrade
*New Hoppers Crossing pumping station
*Vicwaste chemical disposal plant in West Meadows

Education

Jan. 1987

Technicians Certificate Instrumentation and Repair

Southern Glover University – Leschborough, Washington

Jun. 1986

High School Diploma

South Mississippi College – Erdmanhaven, Ohio

Skills

Very good ability to work within a Team enviroment to achieve positive outcomes

Experienced

Understanding of working in a safe manner and providing safe working enviroment for coworkers

Experienced

Knowledge of Industrial plant and systems

Experienced

Problem solving in various fields

Experienced

Professional Summary

Having 13.9 years’ Experience in Preventive and Corrective Maintenance of Field Instruments and Control Systems, Shut down Plant Maintenance Like Compressor, Heater, Boiler, Pumps, Exchanger, Reactor, Vessels etc. Construction and Commissioning of Clean Fuel Project MAB-2 . Very well Aware about Safety in Oil and Gas Industry, Knowledge Of Hazardous Zone Classifications, Familiar in Field bus Foundation and HART Application, I have Experience in Loop Checking & Trouble Shooting in Honeywell Experion PKS & Foxboro I/A Series. Bently Nevada 3500 series Vibration Monitoring System, Rosemount TRL 2 network and wireless system Radar tank gauging, I have Fair Knowledge in Maximo System, I am Able To Read Drawings as like P&ID, Loop Drawings, FBD, Logic Diagrams Cause and Effects Sheet, Cable Schedule, JB & Panel Wiring Diagrams, Instrument Hook Up Drawings Etc.

Employment history

Instrument Technician, Lubowitz, Weber and Goldner. Lake Laurena, West Virginia

Apr. 2019 – Present

Working in Sulfur Recovery Unit, Delayed Coker Unit & Tank Farm, Sea Island Lording Station. maintenance & Commissioning Project being involved in preventive & corrective maintenance activities & trouble shooting of Compressor, Heater, Boiler, Pumps, Exchanger, Reactor, Vessels Interlock, Rosemount Tank Gauging system, Alderley metering skids & field instrument, Maintenance of different types of Control valve, Transmitter, switches and guided wave radar transmitter make of Magnetrol, Working on TRL 2 network and wireless system Radar tank gauging and able to configure the software on devices , change configuration and set point Radar, Repeater and Thump by using configuration software win setup (Rosemount). Knowledge of D.C.S (Experion PKS Honeywell), PLC and Bentley Nevada 3500. Able to read P&ID, ILD, FBD, & Hook up Drawing. Instruments installation, loop checking, plant startup activities, Pre-commissioning & commissioning activities of field instrument for Clean Fuel Project-MAB.

Instrument Technician, Blick-Okuneva. Leilanibury, Florida

Aug. 2015 – Apr. 2016

Worked in preventive & corrective maintenance activities& trouble shooting of field instruments. Replacement of pneumatic field instrument with electronic instruments. Maintenance of different types of Control valve, Transmitter, switches Make of Fisher, Masonailan, ABB, Rosemount & Andres+ Hauser and guided wave radar transmitter make of Magnetrol, Working on TRL 2 network and wireless system Radar tank gauging and able to configure the software on devices, change configuration and set point Radar, Repeater and Thump by using configuration software win setup (Rosemount). Knowledge of D.C.S (Honeywell), PLC and Bentley Nevada 3500. Able to read P&ID, ILD, FBD, & Hook up Drawing.Exclusively worked during shutdown and startup of Crude Distillation Unit& Hydrogen process Units,Instruments installation, loop checking, plant startup activities, Pre-commissioning & commissioning activities during (GRTA MAB-2016) Honeywell DCS Changing from TDC to PKS.

Instrument Technician, Renner, Corwin and Mueller. Lake Meridethmouth, Virginia

Jan. 2013 – Aug. 2013

Calibration & configuration of different field Transmitters like Pressure Transmitter, differential Pressure Transmitter, Temperature Transmitter, level troll & I/P & P/I converter. Checking of different field switches like pressure, temperature, proximity, flow, limit and level switches. Knowledge of D.C.S Foxboro I/A Series, &Control Logix PLC Allen Breadly. Involved in loop checking, plant startup activities & trouble shooting. Replacement of pneumatic field instrument with electronic instruments. Calibration of valve positioners both pneumatic as well as smart. Exclusively worked during shutdown and startup of S.R.U, H.S.R, T.G.T, S.W.T Units. Worked on vibration system make of Bentley Nevada 3500 & Steam turbine blower make of Kawasaki. Erection, commissioning & maintenance experience of gas detectors: H2S and HYDROCARBON Detectors. (Make by General Monitors).

Instrument Technician, Hansen-Lehner. North Rettaville, Oregon

Dec. 2011 – Jul. 2012

Bench Calibration, corrective maintenance of field instrument, troubleshooting activities of almost all types of process control instruments such as Transmitter and switches. Maintenance of different types of Control valve different type Globe, Ball, Butterfly, Diaphragm & Needle Type Valves.

Instrument Technician, Lubowitz-Goyette. Port Terrell, Virginia

Feb. 2011 – Mar. 2011

Installation of an orifice plate, Venture tube, Glycol filling in vet lag Transmitter , Loop Checking , continuity test, , Calibration of Pressure Switch and Pressure Transmitter. Online checking and calibration of control valves. Checking of different field switches like pressure, temperature, flow, limit and level switches. Instruments installation, pre commissioning & commissioning, loop checking, plant startup activities & trouble shooting. Exclusively worked during shutdown and startup.

Instrument Technician, Hayes, Fritsch and Sanford. Hayleyland, Michigan

Apr. 2009 – Jun. 2009

Worked in Utility area Erection, commissioning & maintenance experience of all type of process control instrument such as LT,PT,TT,FT make of Rosemount, ABB, Foxboro and switches , day to day preventive & corrective maintenance activity, table Calibration and field calibration using Hart communicator and hand pump, cable termination, loop checking. Experience of PH and Hydrogen analyzer.

Instrument Technician, Bernier Group. Lake Aundreachester, Alabama

Jan. 2007 – Feb. 2007

Worked in Instrument workshop Calibration and maintenance of all type of process control Instrument such as Control Valve, Transmitter, Pressure gauge, Temperature gauge, Switches and Pneumatic Instruments.

Education

Southern Indiana Academy, Bernhardside, New Jersey

High School Diploma, Electrical Engineering, Dec. 2013

West Kunze, Vandervortland, Washington

Industrial Training, Instrument Mechnical Chemical Plant, Mar. 2005

Skills

Distributed control system

Experienced

Calibration

Experienced

Control Valve & Valve Positioners

Experienced

Radar tank gauging

Expert

Programmable logic controller

Experienced

Professional Summary

Work as Instrument Technician under three major and reputable Oil & Gas Companies in Suriname and Qatar for the past 8 years. Had experience in calibration of different instruments, knowledge in different control system(Foxboro Invensys, Emerson Delta V, Honeywell Experion PKS) as Boardman and field techinician for loopchecking, working with Engineers, Clients/Companies and Consultants like RASGAS, QATARGAS, STAATSOLIE(Suriname), CHIYODA, TECHNIP, PETROFAC & SAIPEM. Also provide support for vendors like G.E., EMERSON & HONEYWELL.

Employment history

Instrument Technician, Swift, Nienow and Hilpert. Hauckton, Vermont

Aug. 2019 – Present

Good knowledge of plant safety rules & regulations.
Perform calibration of instrument devices like temperature transmitter, pressure transmitter, differential pressure transmitter, level transmitter, and flow transmitter.
Records calibrations made, parts and components used, and inventory of parts on hand.
Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments, circuits, and systems.
Monitoring of I/O signals communication.
Perform general maintenance on the equipment.
Makes verbal and written reports of work performed.

Instrument Technician/ Board man Operator, Ward-Hane. Cummingsville, Georgia

Jun. 2014 – Nov. 2014

Led people (future boardman operators), introduce, teach, familiarize and help them use the DCS in loop checking.
Awareness about plant safety work (PPE, 100% tie off, confined space, and LOTO)
Perform calibration of instrument devices like temperature transmitter, pressure transmitter, differential pressure transmitter, level transmitter, and flow transmitter.
Energize instrument and locate junction box and system panel by means of Loop Wiring diagram.
Perform wire continuity test for safety or trouble shooting purposes.
Perform loop check / monitoring/ guide and give support to field man as Boardman operator.(loop check period)
Ensure that proper range and unit are followed base on loop-check folder and instrument tapping point on the P&ID vs Graphics Display.
Use Experion system (Honeywell) DCS for loop check activity.
Perform also as field man for loop check activity.
Locate instrument on field by using P&ID and plant location drawing.
Perform loop test of valves (on-off valve, shutdown valve, blow down valve, flow valve, level valve and temperature valves.
Functional & Logic testing, Fire & Gas System, Motor & all related interlock system testing.
Perform preventive maintenance as accordance to the company procedure.

Instrument Technician, Rolfson LLC. East Emerald, Wyoming

Aug. 2011 – Feb. 2013

Good knowledge of plant safety rules & regulations.
Instrument Hook-up and cable termination.
Preparation of Daily loop check activities and folder fill-up for loop checks testing.
Having the position of Boardman while monitoring/leading/supporting people on site in performing pre-loop and loop check of instrument.
Also perform on site pre-loop and loop check of instrument.
Ability to read the Piping and Instrument Diagram (P&ID), Instrument Loop Diagram (ILD), Instrument Data Sheet and Logic and Control Circuit Diagrams, DCS and ESD wiring and interconnection diagrams.
In charge and perform site & bencPh instrument calibration, (i.e. Level, Flow, Differential pressure, and Temperature)
Calibration of different types of Control Valves.
Monitoring of I/O signals communication.
Use Foxboro system (Invensys) DCS for loop check activity.
Well experienced in Bently Nevada System familiar with both 3500 Series for machine monitoring system and Trendmaster 2000. Good knowledge in adjustment, simulation and troubleshooting on probes for vibration, axial and radial, accelerometer, temperature and speed monitoring for compressor motor, bearing, pump and also turbine.
Monitoring closing of punch lists activities for vendor / local instruments.
Assisting Commissioning activities.
Assisting the G.E. vendor System for the improvement and working of the system and instrument As per G.E. standard.

Junior Engineer, Upton Group. Lake Lorettaside, Massachusetts

Jan. 2008 – Mar. 2008

SMART – EATON Project (Luzon, Metro Manila and Visayas)

Field of Responsibilities:

Installation and Commissioning of EATON 90 kilowatt Rectifier Power Systems

including DC and AC cable layouts.

Installation and Commissioning of Powerware UPS Systems
Installation and Commissioning of EATON Inverter Systems
Installation of 1500 Volts Battery Systems

DIGITEL – HUAWEI Phase 7 Project (Metro Manila)

Field of Responsibilities:

Performed Site Survey for all sites
Generate Technical Site Survey Report (TSSR) and gather site photos for documentation
Installation of HUAWEI Microwave Antennas (Main and Diversity)
Installation of Transmission rack and IDUs including cable layout and power layout.

Office Staff (CAD Department), Williamson, Lockman and Swift. Kareemchester, Wyoming

Aug. 2007 – Nov. 2007

Encode draft plans to computer using Architrend 21- Cad based house designing and planning software. (From doors, windows, wall up to the roof including the furniture inside and outside equipment pattern).
Trimmings of the generated house elevation and perspective for better presentation.
Making a first checked on the finish house plans frames before submitting to the checker to ensure accuracy.
Ensured the house plans is finish on or before the due date while monitoring speed and accuracy.
Communicating on the team leader and other higher personnel for the effectiveness of the housing projects.
Sending the finished house plan to the Control Department in two forms, hard copy and softcopy.
Perform other administrative and clerical duties.

Education

East Lueilwitz University, Lake Nelsonborough, Florida

Bachelor of Science, Computer Engineering, May. 2007

Western Hoppe, Lake Shaybury, Florida

High School Diploma, Aug. 2002

Character Refference

Skills

Installation Instrumentation and Control Devices

Calibration Instrumentation and Control Devices

Configuration Instrumentation and Control Devices

Networking TCP/IP & WIFI

Operating Systems

Diagnose and interpret bioel
Assemble circuitry for electronic systems according to engineering instructions, production specifications, or technical manuals.ectric data, using signal processing techniques.

Inspected and diagnosed problems in multiple unit processes, troubleshooting and took corrective action within policy and procedure limitations.
Removed defective instruments from system, decontaminated, disassembled, and cleaned instruments, and replaced defective parts, using hand tools.
Handled HART EMERSON-field communicator(375,475).
Servicing of SOV and Air filtered regulator.

Instrument installation (On/Off valves, Transmitters, Gauges )
Loop check with automation (Yokogwa DCS)
Trouble shooting and panel wiring inspection.
Detailed study of P&ID,Loop diagram, Instrument data sheet and logic diagrams
Online Calibration of Instruments, loop checking of instruments, meggering of Electrical & Instrument cables, continuity test of cables, internal panel wiring, junction box wiring, hot and cold loop checking, hot change over in running plant, function test as per logic diagram, pre-commissioning, commissioning, Final Punch List clearance.
Preventive and Corrective Maintenance Including Calibration and Troubleshooting of Various Pneumatic & Electronic Field and Panel Instruments namely Pressure , Flow, Level, Temperature Sensors,Transmitters,Indicators,Recorders,Controller,I/P Converters ,Switches,control valve positioners of different Manufactures.
Servicing over Handling and Calibration of all Types of Control valves and Shut-off valves of different Manufactures

Assist Specialist Technician Turbine NPI
Preparation For Turbine Testing
Contuinity
Installation Panel For Turbine Testing
Installation Pipe Compressor, Chiller, Manifold And Transmitter
Pulling And Install Instrumentation Cable, Copper Tube And thermocouple

Function test taken all equipments by DCS / PLC checking its interlocks
Supervise or train project team members as necessary.Troubleshoot, repair, calibrate, Preventive maintenance and corrective Maintenance
Calibration of end devices including transmitters, measurement devices, and control valves.
Used calibration equipment interfaces (such as a Hart Communicator) for setting parameters and calibrating meters and instruments. Used precision measuring devices, testing equipment and shop tools such as drill press, band saw, bench grinder, and torque wrench.

Prepared graphs or charts of data or enter data into computer for analysis.
Performed basic mathematical calculations. Read, interpreted and recorded data from meters, gauges, panels, computer consoles and other equipment.
Observed a strict occupational hazards and safety program involved in Electrical and Instrument maintenance and repair in the Iron and Steel Industry set up.
Maintained, installed, repaired and calibrated a variety of instruments, controls, gauges and metering devices which included electronic circuitry, PLC’s (Programmable Logic Control units) and SCADA (Supervisory Control And Data Acquisition) systems.
Set up HMI (Human Machine Interface), for operational controls, communication with data and workstation servers link up with the operational control scheme.
Used all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.).
Performed all assigned tasks in an accurate and timely manner.

Have a good knowledge of plant safety. Permit to work systems (PTW) and several kinds of permits like Cold work permit, HOT work permit, Limited Space Entry permits.
Supervisory and Inspection for all type of work like Cable tray, Cable laying, JB Installation, Control Room Panel, Cable Glanding & termination, Steel Fabrication, Instrument Mounting, Instrument Tubing connection
Review and verified instrument documents , material requisitions, data sheets, Hook up, cable schedule ,loop sheet , Process flow, P & ID’s, & As built drawings for instruments.
DCS / PLC system architecture drawings, graphics and PLC Logic diagrams, segregation / Grouping of I /O’s.
Able to carry out technical evaluations of vendor offers, checking of vendor drawings, PLC, DCS and relay cabinets and various instruments
Involved in FAT (Factory acceptance test) & SAT (Site acceptance test) Activities.
Calibration loop checking , commissioning of flow pressure level temperature, electronic and smart transmitter, displacer type transmitter, capacitance , Ultrasonic, bubbler types ( torque tube and LDVDT type) pneumatics, transmitter I/P,P/I converter, controller and panel Instrument.

Follows proper guidelines to decontamination and sterilization of all instrument sets.
Monitor biological to ensure consistency of sterilization parameters are being met.
Verifies that instruments are properly functioning, requisition for instruments maintenance repair or replacement and removes defective instruments.
Prioritizing work load and ensure that sets are ready for surgery.
Assuring all instruments and loaner sets are assembled accurately.
Verifying all I.U.S.S. logs are documented correctly.

Ability duties including supervision for installation, testing, troubleshooting, calibration and maintenance of field instruments such as Pressure, Temperature, Flow, Level, Switches,
Installation of Cable trays and Supports, Cable laying, Gladding and Termination of Instrument cables.
Knowledge and calibration of vibration gap voltage, Analyzer
·To read Piping and Instrumentation Diagrams (P&ID)

Install, monitor, maintain, troubleshoot and repair various types of electronic, pneumatic and mechanical instrumentation.
Maintaining of control valves, beck drives, vibration probes, thermocouples, RTD’s, CEM analyzers, positioners, pressure switches, flow, pressure, level, temperature transmitters.
Reprocess and assembling surgical equipment and trays
Sterilized and wash surgical instruments at a fast-paced turnover rate, while maintaining a clean and safe work environment.

Led the Organization on a 3 month Shutdown process contract
PM Job
Hart calibration
Perform Loop check
Valve installation (all types)
Gate valve casing installation

Carrying out SAT(site acceptance test), inspection of all Instruments for MAC (mechanical completion), witness of Calibration, loop checking & functional tests on behalf of Sabic O.E.D (Operations and Expansion Department and P.M.T). Carry out preventive and routine maintenance and functional tests in accordance with maintenance procedures on a variety of equipment and loops
Coordinate with engineering and vendors crew for construction activities
Carryout supervision of construction activities like field instrument installation, impulse tube installation, cable pulling, glanding termination, IR testing and documentation, pressure test,
Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, or bridges.etc.

Well experienced in Bently Nevada System familiar with both 3500 Series for machine monitoring system and Trendmaster 2000. Good knowledge in adjustment, simulation and troubleshooting on probes for vibration, axial and radial, accelerometer, temperature and speed monitoring for compressor motor, bearing, pump and also turbine.
Monitoring closing of punch lists activities for vendor / local instruments.
Assisting Commissioning activities.
Assisting the G.E. vendor System for the improvement and working of the system and instrument As per G.E. standard.

Responsibilities include maintenance, calibration, installation and troubleshooting of a variety of instrumentation.
Instrumentation and equipment such as pressure, temperature, flow, level and differential pressure transmitters.
Maintenance on several manufactures of valves such as Fisher, Masoneilan, Bettis and Neles Jamesbury.
Troubleshooting of several different PLC’s such as Allen Bradley ControlLogix, Siemens and PLC 5.

Perform PPM/Function Test of Manual Call Points, Smoke & Heat Detectors, Point Gas & Flame Detectors, Open Path & H2S Detectors including doing check sheet after doing PPM.
Provided troubleshooting and repairs for equipment errors.
Monitoring of I/O signals communication.
Use Foxboro system (Invensys) DCS for loop check activity.

Cable laying, tagging & termination.
PLC/DCS electronic cards maintenance, cleaning & overhauling of control valves.
Assistance to maintenance team of Ammonia plant for up gradation of gas compressor.
Calibration of different types of Control Valves.

Supervise the daily work activities to ensure work completed on time with quality and safety requirements as per the procedure.
Ensure conformance with environmental and safety requirements commensurate with executing required instrument maintenance or replacement activates.
Assist planning plus operations staff to identify skills and resource need to complete the planning and reactive work activities
Calibration, Installation, Loop checking & commissioning of various instrumentation
Experience in handling technical drawings such as P&ID, Loop diagrams, Termination drawings, Hook up drawings, Location drawings, Instrument datasheet, Cable schedule, etc.
Preparation of Loop check protocols, calibration reports, and all types of documents related to instrumentation.
Holds expertise in troubleshooting and failure analysis with in-depth knowledge about the latest maintenance techniques.

Performs testing, commissioning and troubleshooting of instruments
Visited customer locations to complete assignments
Maintained compliance with environmental standards
Kept work areas clean and neat

Records calibrations made, parts and components used, and inventory of parts on hand.
Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments, circuits, and systems.
Monitoring of I/O signals communication.
Perform general maintenance on the equipment.
Makes verbal and written reports of work performed.

Knowledge of reading and interpretation of schematic, logic, P & I drawings
Testing and repair of furnace burner igniters, flame eyes and air damping system
Performs preventative and corrective maintenance of field instruments
Performs on-site calibration services and inter-laboratory assistance

Good knowledge of plant safety rules & regulations.
Instrument Hook-up and cable termination.
Preparation of Daily loop check activities and folder fill-up for loop checks testing.
Having the position of Boardman while monitoring/leading/supporting people on site in performing pre-loop and loop check of instrument.
Also perform on site pre-loop and loop check of instrument.
Ability to read the Piping and Instrument Diagram (P&ID), Instrument Loop Diagram (ILD), Instrument Data Sheet and Logic and Control Circuit Diagrams, DCS and ESD wiring and interconnection diagrams.
In charge and perform site & bencPh instrument calibration, (i.e. Level, Flow, Differential pressure, and Temperature)

Functional testing of actuator valve
Capable of removing, calibrating and re-installing field instrument
Connection and disconnection of power cables of pump motors
Testing and repair of control, tight shut-off, solenoid, remote operated, pressure relief valves

To provide Job Hazard Analysis for all commissioning work
Liaise with erection and electrical team for instrument installation progress
Liaise with DCS team for loop checking
Plan & Schedule all commissioning work to meet the completion target date
Testing and commissioning installed device at site
Generate test certificate for all tested device and equipment

Testing,Troubleshooting,Calibration of Gas Detector Devices
Testing,Troubleshooting Wiring of Gas Detector Transmitter And Installation
Testing Flame Detector, Smoke Detector ,Heat Detector And Safety Shower by Using Fire&Gas Equipment
Maintain And Troubleshooting

Perform various complex duties classified as moderate inclusive of calibration, maintenance and repairs of tools and equipments in line with established SOP’s
Document calibration process and prepare reports, as required
Perform calibration and approve products and accessories that meet tolerances and product specifications
Perform inspection and calibrate all tooling equipments with help of electronic and pressure equipment and ensure accuracy
Maintain control and traceability related to tooling inside shop and outside vendors
Gather and document the data records related to calibration
Manage repair and calibration of assessment tools and measurement of equipment inclusive of general purpose

Calibration of different kinds of process instrument intended for level, flow, pressure and temperature.
Perform scheduled preventive maintenance work and complete test and maintenance reports.
Ensure all calibration records are filed and update
Functional tests of various kinds of process switches such as level switch, flow switch, temperature switch and pressure switch.
Decommission and commissioning ofinstruments, activities includes instrument installation and termination
Loop checking activities includes continuity check, injecting 4-20ma from instrument side to marshalling cabinet
Calibration and Commissioning of Instrument using BEAMEX MC5/MC2 and Comparator.

Installing, maintaining, inspecting, troubleshooting, repairing and performing preventative maintenance on instrumentation equipment, the control systems and the analyzers.
I am vastly knowledgeable in working on control systems, valves and transmitters that measure the following: ph’s, orp’s, temperatures, flows, pressures, levels, vibrations, control valves.
As an instrument technician, I am responsible for the prompt and accurate diagnosis of minor problems and implementation of corrective actions, along with consulting directly with vendors for resolutions to larger problems.
I have the skills to operate multiple types of shop tools and specialized test equipment, measuring equipment and hand tools that are utilized in any phase of machine and equipment installation and maintenance.
I’m proficient in 24v DC and 120v AC controls for instrumentation.
My knowledge extends into working with moisture, gases and gas chromatography analyzers.

055b46e7-43e3-4c2c-b3be-87fad1092f79

Andrew Smith

Professional Summary

Employment history

Education

Skills

9074eef8-2067-4061-854f-3182863217ee

Andrew Smith

Professional Summary

Employment history

Education

Skills

c90c0671-133d-4b68-8e31-5cee5082c196

Andrew Smith

Professional Summary

Employment history

Education

Character Refference

Skills

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

senior instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician

instrument technician/ board man operator

instrument technician

instrument technician

instrument technician

instrument technician (fire&gas)

instrument technician

instrument technician

instrument technician