Professional Summary

Proactive, friendly customer service specialist dedicated to meeting and exceeding expectations at every interaction. Timely and professional with extraordinary communication skills and ability to build and cultivate relationships to drive business retention. Actively seeking a customer service director role where I can utilize my education and experience to add immediate value to an organization.
Self-motivated, hands-on Electrical Coordinator and Planner offering over 10 years of success working within a broad range of facilities ensuring highest levels of quality control and assurance. Dedicated and motivated to utilize knowledge gained through experience to add immediate value to a growing organization. Proficient in the areas of workforce performance management, productivity and progress oversight, and cross-functional collaboration.

Employment history

Installer, Johnston-Kunde. West Abe, New Jersey

Nov. 2016 – Feb. 2017

Monitor installation of plumbing, wiring, equipment, or appliances to ensure that installation is performed properly and is in compliance with applicable regulations.
Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters’ hand or power tools.

Plumber, Schoen Inc. New Doyle, Hawaii

Apr. 2009 – Jan. 2011

Load and move dirt, rocks, equipment, or other materials, using trucks, crawler tractors, power cranes, shovels, graders, or related equipment.
Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines.
Locate and mark the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels.
Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks.
Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment.

Plumber, Kemmer-Morissette. New Twilaburgh, North Dakota

Feb. 2007 – May. 2008

Operate tractors or bulldozers to perform such tasks as clearing land, mixing sludge, trimming backfills, or building roadways or parking lots.
Remove and replace worn components.
Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
Measure and mark pipes for cutting or threading.
Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.

Education

Northern Ziemann, New Maytown, Michigan

High School Diploma, Mar. 1976

Skills

Installing Pipe

Experienced

Forklift

Expert

Stocking and inventory

Expert

Professional Summary

My name is Jacob England, I am 35. I have recently been at a solar company for a little over 5 years. Position was an installer/lead as well as office inspections. I also have a degree in Electrical installation and troubleshooting and I’m currently finishing up a Welding Certification program at Summit College.

Employment history

Installer/crew lead/Inspections, Greenholt, Bode and Balistreri. Beckitown, Pennsylvania

Nov. 2018 – Oct. 2019

Coordinated daily operations and managed labor for installation crew conducted site surveys, received materials, and constructed ground mounted systems. Gave detailed explanation of product and procedures to clients Maintained client relations, to final inspection by city officials. Managed roof layout designs. Collaborated electrical routing of the conduit to the array Worked on various roof types.Coordinated daily operations

6123/Helicopter Turbine Mechanic, Stoltenberg and Sons. Quigleyfort, Idaho

Aug. 2012 – Nov. 2012

Marine Corps Helicopter Power Plants Mechanic, performed operations, maintenance on Turbine-64 power plants. Inspected, maintained, tested, and repaired. For operations on the CH-53 Helicopter system.

Diesel Mechanic/2147, Langworth, Kautzer and Jakubowski. Noellehaven, New Hampshire

Jan. 2008 – Nov. 2009

The Diesel Repairer/Technician, Supervised, performed basic automotive duties and tasks incident to inspection, maintenance, and repair of diesel engines. Completed basic shop administrative forms and records utilizing technical manuals.

Education

North Jacobi, Geralynfort, Indiana

Associate of Applied Science, Welding, Present

Eastern Brakus University, Ankundingside, Massachusetts

Associate of Applied Science, Electrician, Apr. 2019

Skills

Quality assurance

Time management skills

Project coordination

Professional Summary

I am self motivated to safely setting and achieving goals for myself and my workplace. I pick up task easily and quickly and work well independently as well as in a team environment. I’m mechanically inclined in small engine repairs and specific maintenance. I’m certified in electrical and I’m also a certified digital billboard technician. I have attended and completed the OSHA 10 hour class & certification. I’m also familiar with diagnostics and technical programming. I’m very specific at paying attention to details and specifications.

Employment history

Installer, Towne-Mann. North Rudyfurt, Massachusetts

Feb. 2017 – Present

I, as as installer, independently or with a team installed vinyls and helped maintain approximately 350 structures containing anywhere from 1 to 4 faces. I safely drive and operate company vehicles such as pick ups, bucket trucks, crane trucks, and fork lifts. While maintaining billboards I did everything from painting structures, re-facing structures, tightening various size bolts, welding, build & install add-ons for certain types of signs, used chainsaws and lawn equipment to maintain area and visibility of structures, to completely disassembling and removing structures from the ground. I also completed online electrical certifications to be able to perform various types of electrical work to the billboards. I did other various types of maintenance in our plant and always kept the shop in a clean, safe working environment. Performed basic maintenance on company vehicles as in inspections, checked fluids, air pressure, and made sure hydraulics were in proper working order. I had to document all installations through photographs, mobile applications, emails, and written logs. I attended all safety and company meetings. Before becoming working in the field I had to complete the 2x2x2 which is 6 weeks of learning how to safely use harnesses, wear PPE, use electrical equipment, and safely operate bucket & crane trucks.

Technician, Raynor Inc. Lake Lorileechester, Nevada

Dec. 2014 – Apr. 2016

Safely work on various type of small engines (atv’s, dirt bikes, go-carts- rzrs, etc..). Operate power tools and equipment. Operate forklift. Operate company vehicles. Electrical work. Diagnostics on electrical inside of vehicles. Attend all safety and company meetings.

Education

West New Mexico University, Aufderharmouth, Colorado

High School Diploma, Aug. 2015

Skills

Multi-task

Experienced

Leadership

Skillful

Mechanical

Experienced

Technical

Skillful

Maintenance

Experienced

Electrical

Experienced

Communication

Experienced

Diagnostics

Experienced

Team Work

Experienced

Planning & Organizing

Experienced

Professional Summary

Adaptable and versatile glazing installer with over 5 years of experience possessing a keen eye for detail on a finished product. Capable of working solo or in any size team as a member or leader. Using an understanding of complex building plans to measure and then install a wide variety of different products. Hard working, capable and professional with excellent problem solving skills eager to advance my career and join a successful organisation.

Employment history

Installer, Hoppe Group. West Buckborough, Pennsylvania

Sep. 2014 – Present

Measure, transport and install a variety of products including shower screens, mirrors, sliding wardrobe doors, glass splashbacks and windows.
Confer with customers and building supervisors to provide a suitable and safe product that meets requirements.
Read and interpret building plans and specifications to determine size, shape, colour, type, thickness of glass and location of installation.
Determine plumb of walls or ceilings, using plumb lines and levels.
Experienced in other areas of the company including manufacturing and product programming using computer skills.

Caretaker, Douglas Inc. East Alexisside, West Virginia

May. 2011 – Aug. 2011

Maintaining and cleaning a high school, including repairing broken doors, windows, ceilings, flooring, fencing
Using and maintaining a floor polisher to clean and shine floors.
Using an array of chemicals to clean different surfaces and materials.
Opening and closing the school, including locking up and securing entrances and exits.

Education

Bode University, North Arthurville, Montana

May. 2010

Personal info

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Skills

Attention to Detail when installing products

Interpretation and understanding of building plans

Self organisation and reliability

Working with others as a team member or leader

Time management and customer service skills

Professional Summary

I am a highly enthusiastic, driven and motivated individual often described as showing professionalism and profound maturity with a high levels of cogent skills and attention to detail. My drive to overcome challenges sees me endeavor to gain positive outcomes within my work. I believe I posses excellent interpersonal skills and can adapt to any team to ensure performance, efficiency and productivity.

Employment history

Installer, Hintz-Nikolaus. Wolffberg, New Mexico

Mar. 2018 – Present

Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines.
Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.
Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, or caulking.

Technician, Runolfsdottir-Mayert. Bartellmouth, Nevada

Sep. 2016 – Jan. 2017

Plan pipe system layout, installation, or repair, according to specifications.
Modify and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools, observation, or other methods.
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, observation, or other methods.

Retail Assistant, Oberbrunner LLC. Beerberg, Maine

Sep. 2011 – Nov. 2011

Construct or assemble displays or display components from fabric, glass, paper, or plastic, using hand tools or woodworking power tools, according to specifications.
Supervise the activities of workers engaged in receiving, storing, testing, and shipping products or materials.
Stock shelves with products.

Education

Southern Hilpert, Luettgenside, Oregon

References

Personal info

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Skills

Mechanically minded

Attention to detail

Ability to use a wide range of hand and/or power tools

Motivated, always willing to learn and can adapt to any working environment

Time management and organisational skills

Professional Summary

I am hard working with a professional mindset, not afraid to get my hands dirty and i get a sense of accomplishment in everything i do i take pride in my work and have great problem solving skills. I am very polite and believe the customer or company I am working for is worth every moment of my time because without them I wouldn’t have a job.

Employment history

Installer, Rath, Runolfsson and Shields. South Dwight, Vermont

Asses what was needed for each individual job and give pointers as to the best way to achieve the job in a cost effective and timely fashion. Job duties included installing car stereos, alarm systems, installing aftermarket power locks and speakers as well as door pins for security and running new wire in and outside the car or truck. Review damage, prepare or review repair cost estimates, and plan work to be performed.

roofer, Zulauf LLC. South Freemanbury, Florida

May. 2017 – Jun. 2017

Install metal and fiberglass roofing in a timely manor.
Apply alternate layers of hot asphalt or tar and roofing paper to roofs.
Inspect problem roofs to determine the best repair procedures.
Align roofing materials with edges of roofs.
Set up scaffolding to provide safe access to roofs.
Estimate roofing materials and labor required to complete jobs, and provide price quotes.
Clean and maintain equipment.
Cement or nail flashing strips of metal or shingle over joints to make them watertight.
Install, repair, or replace single-ply roofing systems, using waterproof sheet materials such as modified plastics, elastomeric, or other asphaltic compositions.
Install vapor barriers or layers of insulation on flat roofs.
Cut felt, shingles, or strips of flashing to fit angles formed by walls, vents, or intersecting roof surfaces.
Cut roofing paper to size using knives; and nail or staple roofing paper to roofs in overlapping strips to form bases for other materials.
Cover exposed nailheads with roofing cement or caulking to prevent water leakage or rust.
Install partially overlapping layers of material over roof insulation surfaces, using chalk lines, gauges on shingling hatchets, or lines on shingles.
Cover roofs or exterior walls of structures with slate, asphalt, aluminum, wood, gravel, gypsum, or related materials, using brushes, knives, punches, hammers, or other tools.
Punch holes in slate, tile, terra cotta, or wooden shingles, using punches and hammers.

Iventory managment, Corkery, Macejkovic and Deckow. Robelmouth, Arkansas

Sep. 2015 – Feb. 2016

Respond to customers’ or shippers’ questions and complaints regarding storage and distribution services.
Use computers to produce signage.
Maintain regular audits on products.
Organize back room for trucks and products to be delivered.
Operate walking forklift as well as power jack and scissor lift.
Pick merchandise from bins and scan merchandise into bins to keep a running count of all products.
Search for items customers need from back room.

Education

West North Dakota Academy, West Chadwick, Connecticut

GED, General, Jun. 2010

Skills

Tech Savvy

Expert

Problem Solver

Expert

Determination

Expert

Professional Summary

Adaptable, open-minded, experienced in buildings and home. Verifiable success in home building projects from inception to completion. Ability to decipher and comprehend construction blueprints, development drawings, and specifications. Hard-working, capable professional with exceptional time management skills and keen attention to detail. Proven leader eager to advance my career and join a well-known, established organization.

Employment history

Machine operator, Olson, Johns and Grimes. Thereseberg, Maine

Sep. 2019 – Present

Arrange for disposal of surplus materials.
Determine size and arrangement of illustrative material and copy, and select style and size of type.
Key and program specified commands and engineering specifications into computer system to change functions and test final layout.
Remove completed or defective products or materials, placing them on moving equipment such as conveyors or in specified areas such as loading docks.
Confer with coworkers to get information about order details, processing plans, or problems that occur.
Interpret blueprints and drawings to determine specifications and to calculate the materials required.
Select gauges or types of sheet metal or nonmetallic material, according to product specifications.
Confer with managerial or technical personnel, other departments, or contractors to resolve problems or to coordinate activities.
Analyze worker or production problems and recommend solutions, such as improving production methods or implementing motivational plans.

Installer/Fabricator, Will Group. Heathcotefort, Michigan

May. 2016 – Jun. 2016

Take actions to deal with the results of delays, bad weather, or emergencies at construction site.
Inspect or review projects to monitor compliance with building and safety codes, or other regulations.
Study job specifications to determine appropriate construction methods.
Evaluate construction methods and determine cost-effectiveness of plans, using computers.
Evaluate construction methods and determine cost-effectiveness of plans, using computers.Arrange for disposal of surplus materials.
Consult with clients to determine functional or spatial requirements of structures.
Prepare information regarding design, structure specifications, materials, color, equipment, estimated costs, or construction time.
Operate computer-aided drafting (CAD) equipment or conventional drafting station to produce designs, working drawings, charts, forms and records.
Coordinate structural, electrical and mechanical designs and determine a method of presentation to graphically represent building plans.
Evaluate construction methods and determine cost-effectiveness of plans, using computers.

Education

South Virginia College, Tillmanchester, South Carolina

High School Diploma, General Diploma, Jun. 2015

Personal info

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Skills

Scheduling

Reading Blueprints

mathmaics

Basic Computer Skills

Professional Summary

Over 11 years experience providing quality window and door installations.
Experienced window and door installation technician seeking a installation role within a reputable, customer-centric organization. Adept at providing leadership to installers and communicate with customers and co-workers on all levels. Technically advanced, organized professional with in-depth knowledge of construction procedures, tools, and safety policies and guidelines. Experienced in residential and commercial glazing, also retro window replacement. Experienced Door installer.

Employment history

Installer, Schmidt, Johnston and Lubowitz. Port Raymondburgh, Wyoming

Oct. 2017 – Dec. 2017

Read and interpret blueprints or specifications to determine size, shape, color, type, or thickness of glass, location of framing, installation procedures, or staging or scaffolding materials required.
Determine plumb of walls or ceilings, using plumb lines and levels.
Measure mirrors and dimensions of areas to be covered to determine work procedures.
Cut, fit, install, repair, or replace glass or glass substitutes, such as plastic or aluminum, in building interiors or exteriors or in furniture or other products.
Confer with customers to determine project requirements or to provide cost estimates.
Set glass doors into frames and bolt metal hinges, handles, locks, or other hardware to attach doors to frames and walls.
Install pre-assembled metal or wood frameworks for windows or doors to be fitted with glass panels, using hand tools.
Load and arrange glass or mirrors onto delivery trucks, using suction cups or cranes to lift glass.

Installer, Pacocha, Lubowitz and Crist. Wisozkville, Louisiana

Aug. 2007 – Apr. 2010

Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
Follow established safety rules and regulations and maintain a safe and clean environment.
Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters’ hand or power tools.
Verify trueness of structure, using plumb bob and level.
- Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter’s hand tools, or power tools.
- Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
- Supervise, coordinate, or schedule the activities of construction or extractive workers.
- Read specifications, such as blueprints, to determine construction requirements or to plan procedures.
- Train workers in construction methods, operation of equipment, safety procedures, or company policies.

Read and interpret blueprints or specifications to determine size, shape, color, type, or thickness of glass, location of framing, installation procedures, or staging or scaffolding materials required.
Determine plumb of walls or ceilings, using plumb lines and levels.

Education

Southern Cassin Academy, Jerricamouth, Massachusetts

High School Diploma, Genera Education, Mar. 2006

Skills

Window Installer

Experienced

Glazier

Experienced

door installer

Experienced

Professional Summary

………..offering over 7 years of success working within a broad range of facilities ensuring highest levels of quality control and assurance. Dedicated and motivated to utilize knowledge gained through experience to add immediate value to a growing organization. Proficient in the areas of………..

Employment history

Installer/Helper, Zemlak, Kub and Christiansen. Jacobihaven, Virginia

Aug. 2019 – Present

Reassure safety equipment is adequate for use
Inspection chimney flue
Deliver chimney equipment; caps, dampers, chase tops, energy tops, chamber safe, etc.
Mechanical cleaning
Inspect problem roofs to determine the best repair procedures.
Remove excess mortar with trowels and hand tools, and finish mortar joints with jointing tools, for a sealed, uniform appearance.
Lay and align bricks, blocks, or tiles to build or repair structures or high temperature equipment, such as cupola, kilns, ovens, or furnaces.
Mix specified amounts of sand, clay, dirt, or mortar powder with water to form refractory mixtures.
Spray or spread refractory material over brickwork to protect against deterioration.

Manager, Macejkovic and Sons. South Tanya, Rhode Island

Dec. 2014 – May. 2016

Direct or coordinate an organization’s financial or budget activities to fund operations, maximize investments, or increase efficiency.
Organization officials, or staff members to discuss issues, coordinate activities, or resolve problems.
Prepare budgets for approval, including those for funding or implementation of programs.
Coordinate staff schedules and placements.
Regulated safety methods

Foreman, Wolf Inc. Dachville, Connecticut

Jun. 2015 – Nov. 2015

Remove excess mortar with trowels and hand tools, and finish mortar joints with jointing tools, for a sealed, uniform appearance.
Break or cut bricks, tiles, or blocks to size, using trowel edge, hammer, or power saw.
Lay and align bricks, blocks, or tiles to build or repair structures or high temperature equipment, such as cupola, kilns, ovens, or furnaces.
Fasten or fuse brick or other building m
Mix specified amounts of sand, clay, dirt, or mortar powder with water to form refractory mixtures.aterial to structure with wire clamps, anchor holes, torch, or cement.
Hardscaping

Education

The Schinner Institute, New Donaport, Illinois

High School Diploma, Sep. 2010

Skills

Safety oriented

Bilingual

People-oriented

Works well under pressure

Professional Summary

Dependable and hardworking with many years in the manufacturer, production industry, and telecommunication.
Safely operates and maneuvers a diverse range of heavy duty equipment. Thrives in a fast-
paced environment and works to complete projects quickly and efficiently.

Employment history

Installer, Koelpin-Lueilwitz. South Inellberg, New Jersey

Aug. 2014 – Sep. 2014

Inspect or test lines or cables, recording and analyzing test results, to assess transmission characteristics and locate faults or malfunctions.
Splice cables, using hand tools, epoxy, or mechanical equipment.
Access specific areas to string lines or install terminal boxes, auxiliary equipment, or appliances, using bucket trucks, or by climbing poles or ladders, or entering tunnels, trenches, or crawl spaces.
Participate in the construction or removal of telecommunication towers or associated support structures.
Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.
Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.
Establishes voice and data networks by running, pulling, terminating, and splicing cables; installing telecommunications equipment, routers, switches, multiplexors, cable trays, and alarm and fire-suppression systems; building ironwork and ladder racks; establishing connections; programming features; establishing connections and integrations; following industry standards; activating remote access tools; coordinating with contractors.

Soter, Welch-Hirthe. Kirkmouth, New York

Oct. 2012 – Jul. 2013

Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
Position, align, and adjust parts for proper fit and assembly.
Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
Check work pieces to ensure that they are properly lubricated or cooled.
Start machines, monitor their operations, and record operational data.
Sorting parts and placed them into correct baskets.
Packager Take parts off assembly line.
Perform visual inspection Package and stage for shipping.
Assembler Work assembly line and package into cases.
Palletized finished product.
Stage pallets for shipping.
Assemble equipment and furniture.

Package Sorter, Koepp and Sons. North Zadaton, Nevada

Dec. 2009 – Mar. 2010

File, lap, and buff parts to fit, using hand and power tools.
Organizing packages according to pallets from bins checking FedEx numbers for miss sorts.
Load trucks, and also scan packages onto trucks.
Feed packages onto belt to be loaded on to trucks, checking FedEx load numbers of packages for wrong truck.
Unload incoming packages from pallet onto belt to be sorted into bins for outbound
trucks.

Education

Western Illinois Institute, North Robt, South Carolina

Aeriall Lift Operator, Oct. 2017

Gerlach Academy, North Edmund, Washington

NFPA 70E-ARC Flash Safety including lockout/tagout, Dec. 2015

South Dibbert University, Krajcikchester, Illinois

Confined Space Entry, Nov. 2015

Western Cormier College, Port Florentinashire, Wisconsin

Osha-10 construction safety and health, Feb. 2014

Northern Grimes Institute, Joannborough, Utah

High School Diploma, Science, Apr. 2009

Skills

lead

Experienced

Detail-oriented

Experienced

Friendly and hardworking

Experienced

uplifting

Experienced

Dependable

Experienced

Flexible

Experienced

Interpersonal

Experienced

Responsible

Experienced

Professional Summary

Safety and service-oriented Telecommunications Technician with over 20+ years career experience including but not limited to radio, lightwave, microwave, digital multiplex equipment, voice & network installation. Expertise in digital diagnostic and repair techniques. FCC License PG84423

Employment history

Installer, Keeling LLC. Herzogtown, Kansas

Mar. 2007 – Dec. 2007

Installation of voice over IP, modems, internet and television packages
Troubleshoot and resolve subscriber issues.

Back Haul Specialist, Willms and Sons. Lake Darenbury, New Hampshire

Mar. 2002 – Jul. 2002

Managed installation of DS-1 facilities to cell sites.
Interfaced directly with the LEC’s outside plant engineers, construction crews, utility coordinators, circuit provisioners, and project managers.
Installed licensed and unlicensed microwave radio for SBA broadband.

Network Technician, Hartmann-Rau. North Alec, South Carolina

Oct. 1999 – Mar. 2000

Provided technical support for a large bank with many branches across the Southeast Programming/installation of Adtran and Telco Systems channel banks, Cisco routers. Resolved trouble tickets on voice and network links Worked with PC support on overlapping problems

Technician, Conroy, Beahan and Huels. Yundtmouth, Idaho

Nov. 1996 – Mar. 1997

Programming, installation and cut-over of PBX’s, Keysystems, Voice Mail, and all associated hardware. Troubleshooting and repair of existing systems. Cat5 installation.

Communications Specialist – Chief Installer, Schmitt, Spinka and Morar. Legrosville, Arizona

Dec. 1982 – Apr. 1992

Provided technical support and installation for the Atlanta division. Responsible for PBX administration. Installation and certification of OC-3 mux and D4 channel bank equipment at primary and hub locations. Promoted several times and as a consultant during the migration from Microwave to optical backbone.

Education

Southern Larkin College, Gloverberg, Alaska

Unfinished Associates in Electronics, Coursework in A/C D/C Logic and Radio Comunications, Jul. 1986

Skills

Telecommunications Installer

Expert

Network Operations Tech

Experienced

PBX and Key system Installation – Radio Repair

Experienced

Certifications

Professional Summary

Hard working, young and energetic air conditioning installer with experience. Very productive, efficient, hands on learner and ready for any challenge that comes on the way to make a customer happy. Fluent in few languages listed lower in this resume, and very motivated to work and advance in HVAC field or experiment and change career path. Currently enrolled part time in college with a GPA of 3.0 and soon will graduate(online classes therefore college will not intervene with work schedule). Very good communication and listening skills with customers, co-workers and work personnel. Have clean Florida driver’s license, and safe driver. Ready for a new job challenge!

Employment history

Installer/Service Tech, Kunde-Armstrong. Donnellybury, Oregon

Jul. 2019 – Sep. 2019

Duties include:

repair, replace and maintain air conditioning systems
install indoor and outdoor equipment, as well as media filters and humidifiers;
removing and reinstalling duct-work, (making a layout of new duct-work)
replacing compressors and coils, motors and other parts.
test electrical circuits or components, using electrical test equipment.
assemble, position and mount heating or cooling equipment, following blueprints.
installation of new duct work at new construction
perform preventative maintenance on air conditioning systems

Maintenance Helper, Wehner Inc. West Royalburgh, Massachusetts

Feb. 2016 – Apr. 2016

Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
minor repair work at residential houses.
yard work, including lawn moving and tree trimming.
ensure that everything on a property is working and in tidy condition.

Education

Goldner Institute, North Cecila, California

Associate of Science, Construction Management/Drafting, Present

Cole Academy, Reneton, Massachusetts

High School Diploma, Nov. 2016

Skills

Quick Learner

Foreign Languages

Communication/Teamwork

Working under pressure

Responsible/Problem Solving

Flexibility

Problem Solving

Management Skills

Languages

English

Ukrainian

Russian

Spanish

Professional Summary

Self-motivated, knowledgeable telecommunications professional, electrical coordinator, and planner offering experience working across a broad range of facilities and systems while ensuring high-levels of quality and control. Extensive success managing construction sites, overseeing employees and contractors, and monitoring workforce performance, productivity, and progress. Strong ability to manage cross-functional teams while maintaining collaborative working relationships.

Employment history

Installer, Wisozk, Oberbrunner and Cremin. Darwinhaven, South Carolina

Mar. 2019 – Feb. 2020

I Installed Satellite TV, Installed satellite internet services and provided services to customers

Travel to customers’ premises to install, maintain, or repair audio and visual electronic reception equipment or accessories.
Splice cables, using hand tools, epoxy, or mechanical equipment.
Inspect or test lines or cables, recording and analyzing test results, to assess transmission characteristics and locate faults or malfunctions.
Explain cable service to subscribers after installation and collect any installation fees that are due.

Store Manager, McDermott-Marquardt. Kennyborough, Massachusetts

Jun. 2013 – Sep. 2017

Maintain sanitation, health, and safety standards in work areas.
Clean food preparation areas, cooking surfaces, and utensils.
Verify that prepared food meets requirements for quality and quantity.
Cook and package batches of food, such as hamburgers and fried chicken, which are prepared to order or kept warm until sold.
Prepare specialty foods such as pizzas, fish and chips, sandwiches, and tacos, following specific methods that usually require short preparation time.

Education

The Rempel, Lake Jamashire, Idaho

GED, GED, Jan. 2018

Skills

Customer Service

Driving

Goal Oriented

Professional Summary

I am a motivated and adaptable team player, leader, highly-ethical, qualified professional armed with experience developing and executing strategic plans to lead organizations business development, and long-term sustainability. Superb ability to succeed in challenging, high-pressure, deadline-driven environments.

Employment history

Installer, Schultz-Padberg. Smithamton, North Carolina

Jul. 2016 – Sep. 2016

Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
Repair or adjust equipment, machines, or defective components, replacing worn parts, such as gaskets or seals in watertight electrical equipment.
Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.
Level concrete and allow to dry.

Area Supervisor-Site Facilitator, Spencer-Wisoky. Port Rochelchester, Arkansas

Jan. 2009 – May. 2009

Maintain a safe play environment.
Observe and monitor children’s play activities.
Communicate with children’s parents or guardians about daily activities, behaviors, and related issues.
Perform general personnel functions, such as supervision, training, and scheduling.
Create developmentally appropriate lesson plans.
Help children with homework and school work.
Discipline children and recommend or initiate other measures to control behavior, such as caring for own clothing and picking up toys and books.
Perform general administrative tasks, such as taking attendance, editing internal paperwork, and making phone calls.
Organize and participate in recreational activities and outings, such as games and field trips.
Consult with parents, teachers, and other school personnel to determine causes of problems such as truancy and misbehavior, and to implement solutions.
Perform first aid or cardiopulmonary resuscitation (CPR) when required.
Instruct children in safe behavior, such as seeking adult assistance when crossing the street and avoiding contact or play with unsafe objects.
Organize and conduct age-appropriate recreational activities, such as games, arts and crafts, sports, walks, and play dates.
Confer with board members, organization officials, or staff members to discuss issues, coordinate activities, or resolve problems.
Serve as liaisons between organizations, shareholders, and outside organizations.

Education

South West Virginia University, Peterfort, South Carolina

Associate of Arts, Undergrad

Northern Nienow Institute, Enaport, North Dakota

High School Diploma, Aug. 2000

Skills

Team Player

Experienced

Management

Experienced

Leadership

Experienced

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Electrician looking to further develop my skills in the industry, already having experience in the Industrial, Commercial & Residential fields.
Motivated, eager to learn and always willing to help make a job safer and more efficient for everyone involved. Excellent communication skills, can work apart of a team or alone, and driven to meet standards that are expected.

Employment history

Jan. 2018 – Mar. 2018
Medhurstport, Vermont

Installer, Torp-Orn

Installer

Worked for various commercial furniture installation companies within the Perth metro area.

Jobs specifics included:

assembling of motorized desks
manual handling/heavy lifting
reading a commercial plan
repairs to faulty equipment
cable management installation

Sep. 2016 – May. 2017
New Nell, Oklahoma

Electrician, Reinger-Rath

Electrician

Worked across Perth with a variety of works mainly in residential installations and commercial maintenance (Hollywood Hospital, St Mary’s All Girls School).

Tasks included:

electrical installation & maintenance (residential, commercial & industrial)
data communications installation & maintenance (residential, commercial & industrial)
responsibility and upkeep of a company vehicle
working with a team, including apprentices under my supervision
utilising electrical plans
running my own jobs from start to finish (job planning, material listing, carrying out works & carrying out/recording testings)
invoicing with the use of a tablet

Jun. 2016 – Jul. 2016
Lake Corrineberg, New Mexico

Apprentice Electrician, Blick-Reichert

Apprentice Electrician

Carried out my electrical apprenticeship with a host company for the entirety of four years (CPR Electrical).

Tasks included:

assisting multiple tradesman with various duties
electrical installation works (commercial & industrial)
data communications works (commercial & industrial)
responsibility of a company vehicle
general apprentice duties including housekeeping, cleaning, paperwork etc

May. 2012 – Jun. 2012
Clarkborough, Texas

Trades Assistant, Schmitt-Feil

Trades Assistant

Assisted tradesman to get hands on experience in the industry.

Tasks included:

assisting various tradesmen in the electrical workplace
manual labour
housekeeping duties
office duties

Education

Dec. 2016

Certificate III: Electrical A Grade

Hayes Institute – Hodkiewiczport, Oregon

Aug. 2007

Year 12 High School: High School

Southern Bosco – West Maryjane, Texas

Skills

Electrical License

High Risk Work License

CPR / LVR – HLTAID001 / UETTDRRF06B

Physically fit

Computer Skills

Ability to work in a team environment or alone

Drivers License – Class C

Rio Tinto Inductions – IOE, EWC, Arc Flash, LH, PI

White Card

Communication & Punctuality

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

I am a dependable hardworking young man, looking for a company that offers great opportunity’s and growth. I am a good team player and will always try and make things go more smoothly. I like problem solving and using my brain. safety is my number one, nothing is more important than mine and others personal safety.

Employment history

Nov. 2019 – Present
Ferrymouth, Michigan

Installer, Adams Inc

Change existing equipment, with new equipment
Fabricate, assemble, or install duct work
Reinsulate any duct work If needed
Install new thermostats
Wire up new units
Install new or hook up existing drain lines
Braze copper line sets

May. 2017 – Jul. 2017
Kuphalmouth, Connecticut

Metal fabricator/Installer, Auer, Mitchell and Crist

Fabricate metal into duct work and fittings, using shop and metal working tools
Read commercial Blueprints and convert into shop drawings
Use metal brake, Pittsburgh machine, and pin spotter
Insulate straight duct and fittings
Keep shop materials stocked for installers
Keep shop clean for safe working conditions
Change out existing equipment, with new equipment

Jun. 2016 – Jul. 2016
Altenwerthchester, Alabama

Chemical, Abbott, Yost and Hansen

spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees.
Mix chemicals

Mar. 2016 – Apr. 2016
South Rochelletown, Minnesota

Lawn maintnence, Howell Group

Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws.
Trim or pick flowers and clean flower beds.
Rake, mulch, and compost leaves.
Mow, Weed eat, edge yards

Feb. 2015 – Jun. 2015
Lake Cecilia, Washington

Bus boy, Reynolds, Blanda and Legros

Ensure all tables are clean, in a timely manner
Keep areas swept and clean
Remove dirty dishes to wash area

Education

Dec. 2016

High School Diploma

Western Pagac – Port Cedrick, Pennsylvania

Skills

metal fabricator

Skillful

welding

Beginner

problem solving

Skillful

Professional Summary

Applicant with over 5 years of manufacturing experience seeking role as a CNC Machinist. Comprehensive knowledge of CNC mills, setting up and operation of machines. Familiarity with keeping products within tight tolerances. Exceptional ability to adhere to demanding schedules with tight deadlines.

Education

Rutherford Academy, Winnieberg, North Dakota

High School Diploma, Sep. 1988

Employment history

Installer, Padberg Inc. New Burtonland, Iowa

Nov. 2015 – Dec. 2016

Fasten building material to structure with correct fasteners and with proper application procedure.
Interpret blueprints and drawings to determine specifications and to calculate the materials required.

Service Technician, Pfeffer-Rutherford. New Terenceburgh, Idaho

Mar. 2009 – Nov. 2013

Scheduled daily tasks to be performed per customer requests.
Ordered chemicals and equipment needed to perform daily tasks and to fulfill customers needs.
Provided proper service per customers request to guarantee the best service possible.
Inspected faulty or inoperable equipment, ordered and installed correct replacement parts as needed.

Machinist, Weissnat and Sons. Randellshire, South Dakota

Jan. 2006 – Feb. 2006

Set up, adjust, and operate Haas CNC vertical mill to perform precision machining operations.
Machine parts to specifications, using Haas CNC vertical mill.
Removed sharp edges from parts using proper methods set forth by the company guidelines.
Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers or vernier calipers.

Service Technician, Hessel, Kovacek and O'Keefe. Moenland, Hawaii

Nov. 2004 – Dec. 2004

Scheduled daily tasks to be performed per customer requests.
Ordered chemicals and equipment needed to perform daily tasks and to fulfill customers needs.
Provided proper service per customers request to guarantee the best service possible.
Inspected faulty or inoperable equipment, ordered and installed correct replacement parts as needed.

Service Technician, Jacobson, Zemlak and Homenick. Lake Leah, West Virginia

Mar. 2002 – May. 2002

Provided proper service per customers request to guarantee the best service possible.
Inspected faulty or inoperable equipment, ordered and installed correct replacement parts as needed.

Service Technician, Ernser Inc. New Louvenia, New Jersey

Sep. 2001 – Nov. 2001

Provided proper service per customers request to guarantee the best service possible.
Inspected faulty or inoperable equipment, ordered and installed correct replacement parts as needed.

Machinist, Crona Inc. North Candyce, Mississippi

Feb. 1999 – Apr. 1999

Set up, adjust, and operate Haas CNC vertical mill to perform precision machining operations.
Machine parts to specifications, using Haas CNC vertical mill.
Removed sharp edges from parts using proper methods set forth by the company guidelines.
Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers, vernier calipers, depth micrometers and digital height scales.

Installer, Toy-Mills. South Roxyville, Arkansas

Oct. 1993 – Feb. 1995

Installed various types of roofing systems using proper methods of application.
Removed older/worn out roofs.
Installed vinyl siding on buildings using proper procedures.
Installed new replacement windows using proper procedures.

Food preparer, Conroy Inc. East Lalatown, Utah

Mar. 1987 – Jan. 1989

Took customer’s order and prepared as i was trained.
Calculated the customer’s bill , received money, and made change as needed.
Replenished stock as needed to maintain a smooth working environment for my co-workers and myself.

Skills

Production

Experienced

Problem Solving

Experienced

Communication

Expert

Professional Summary

10+ years graphic design and digital photography experience. Particularly adept with Adobe In-Design, Illustrator and Photoshop applications in both educational and commercial settings. Seeking a position in an environment which emphasizes teamwork and encourages learning by doing.

Innovative, forward-thinking executive offering over 20 years of success in various leadership roles in the areas of Information Technology consulting, customer support, pre-sales engineering, and global business development. Expert in strategic and tactical planning, client relationship management (CRM), corporate governance, and change management.

Employment history

Kitchen Hand, Kling, Vandervort and Carter. Dickinsonstad, Delaware

May. 2018 – Present

Observe color of products being baked and adjust oven temperatures, humidity, or conveyor speeds accordingly.
Set oven temperatures and place items into hot ovens for baking.
Combine measured ingredients in bowls of mixing, blending, or cooking machinery.
Clean service or seating areas.
Create signs to advertise store products or events.
Prepare or serve hot or cold beverages, such as coffee, espresso drinks, blended coffees, or teas.

Installer, Champlin LLC. New Iraidaton, New York

Jan. 2018 – Feb. 2018

Converse with customers to determine details of equipment problems.
Splice wires with knives or cutting pliers, and solder connections to fixtures and equipment.
Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
Inspect and test electrical or electronic systems to locate and diagnose malfunctions, using visual inspections and testing instruments such as oscilloscopes and voltmeters.
Estimate costs of repairs based on parts and labor charges.
Confer with customers to determine the nature of malfunctions.

Education

Moore College, East Emersonside, Idaho

High School Diploma, Medicine, Aug. 2017

Skills

Great Interpersonal Skills

Marketing

MS Office, HTML

Professional Summary

Dedicated to providing customers the best experience when helping them by providing a fast and very detailed job. When possible always trying to make suggestions to the customer on what they may need to have a use for. Multiple good surveys about a level of professionalism and attention to detail from not only customers but managers.

Employment history

Ecommerce Personal Shopper, Erdman LLC. Port Tanner, North Dakota

Oct. 2019 – Present

Keep areas neat while working and return items to correct locations following demonstrations.
Shop for items that will best fit customers standards
Provide customers with all information needed about services
Keep work done on time and correctly

Installer, Price and Sons. Broderickchester, New Mexico

May. 2018 – Jun. 2018

Take actions to deal with the results of delays, bad weather, or emergencies at construction site.
Study job specifications to determine appropriate construction methods.
Requisition supplies or materials to complete construction projects.
Working with customers to make sure they are pleased with the job.

Detailer, DuBuque, Rippin and Turner. Boscoland, Texas

Jun. 2017 – Jul. 2017

Cleaning cars customers have bought to make sure they are spotless.
Provide the customer with what they want.
Quick and efficient.

Sales, Herman, Moen and Gaylord. McDermottfort, Washington

Feb. 2016 – Apr. 2016

Explain products or services and prices and demonstrate use of products.
Answer questions about product features and benefits.
Set up and display sample merchandise.
Stock carts or stands.
Dress mannequins for displays.
Change or rotate window displays, interior display areas, or signage to reflect changes in inventory or promotion.

Intern, Altenwerth-McClure. West Glenniebury, Missouri

Sep. 2015 – Oct. 2015

Count money in cash drawers at the beginning of shifts to ensure that amounts are correct and that there is adequate change.
Answer customers’ questions, and provide information on procedures or policies.
Sort, count, and wrap currency and coins.
Compile and maintain non-monetary reports and records.
Cash checks for customers.
Keep periodic balance sheets of amounts and numbers of transactions.

Education

Eastern Franecki Institute, North Hector, Iowa

Associate of Arts, Criminal Justice, Present

Skills

Word

Access

Excel

Professional Summary

This seems like the perfect fit for someone like me and I think it would benefit the company just as much. My background as a union floor layer takes care of any flooring needs that would ever need to be done as well as my background at Hig Investments and remodeling homes gives me the ability to do anything else that should come up that perhaps a typical floor layer wouldn’t know how to handle. I take pride in what i do I’m good at what I do and have great confidence that there’s nothing I cant handle or accomplish. This is a perfect fit I’m exactly what the company needs and look forward to working with you soon.

Employment history

Installer, Larkin-Cummings. Barrowsfort, Alabama

May. 2019 – Jun. 2019

Made display boards for dal tile of there new product lines and designs that are shipped out to lowes , homedepot , flooring decor, and menards.

Kept up with and maintained quality control.

Responsible for meeting deadlines and staying on budget.

Picked up material when needed to stay on course and continue job flow.

Cutting , setting , grouting , and boxing orders that needed to be done.

Installer, D'Amore, Bosco and Leannon. Clementeview, New Mexico

Feb. 2019 – Mar. 2019

Lead installer , managed the day to day jobs getting done .

Responsible for picking up and delivering all materials to job sites.
Maintained all paperwork and invoices for all jobs
Kept the budget and timelines for all jobs .
Installed , carpet,laminate, vinyl, lvp , lvt , vct , ceramic tile, hardwood , and ran the jobs from start to finish.
Kept logs and time cards for all employees.

Installer, D'Amore-Schuster. McGlynntown, Massachusetts

Jan. 2010 – Jun. 2010

Union floor shop . Started off as an apprentice and worked my way to a full journeyman. Went to union school to get my journeyman card.

Installed any type of flooring there is , carpet, vinyl, laminate, tile, hardwood , and so on .

Responsibilities were to get to work before 7 a.m. and meet any deadlines that needed to be met for that day or work ect. Maintained a quality install on every job and take pride in what you do and how you do it.

Superintendent, Braun, Abernathy and Ritchie. South Rivachester, Hawaii

Mar. 2008 – May. 2008

Started off as a laborer and worked up from there until I reached superintendent. In charge of all the new remodels and Rehab on rental properties that the company purchased and owned. I rehab 55 homes over that time. From floor to ceiling. Most were complete remodels and Rehab Sonu flooring throughout repaired or replaced any drywall tape and mud new trim and doors new electrical outlets switches light fixtures and any other electrical that needed to be done. Complete kitchen and bathroom remodels and updates I also did all the kitchen cabinets countertops and sinks dishwashers garbage disposals repair to replace any drywall tape and mud new trim and doors new electrical outlets switches light fixtures and any other electrical that needed to be done. complete kitchen and bathroom remodels an update I also did all the kitchen cabinets countertops and sinks dishwashers garbage disposals completed the project start to finish. Also put new flooring throughout and also tiled all the kitchens and bathrooms so I would install carpet laminate vinyl tile Hardwood Etc whatever the project called for. As far as my responsibilities beyond the typical day-to-day construction work are as follows.
Responsible for all the rental properties and keep up and any repairs that needed to be done.
Built relationship with all the tenants and maintained a great line of communication.
In charge of all new purchased remodels and renovations
Set a budget for All projects and came up with all the estimates each home would take to complete and set a time frame and deadline for all projects.
Responsible for finding ways to increase profit and company growth.
Lead two teams of employees and set daily, weekly and monthly goals with bonuses
Met with sub contractors for bids
Purchased all materials and responsible for having everything needed to complete projects start to finish.

Education

South Leannon College, Robertsmouth, Arizona

4yr apprenticeships, Flooring, Jul. 2012

Western Bradtke, Port Yolandetown, Arizona

High School Diploma, Badic, Jan. 2001

Skills

Plumbing

Experienced

Electrition

Experienced

Drywall hang and tape

Experienced

Painter

Expert

Carpenter

Expert

Flooring

Expert

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Self-motivated, hands-on labor and Planner offering over 5 years of success working within a broad range of company’s ensuring highest levels of quality control and assurance. Dedicated and motivated to utilize knowledge gained through experience to add immediate value to a growing potential employee. Proficient in the areas of workplace performance, productivity and progress.

Employment history

Jun. 2016 – Feb. 2017
North Lashonside, Utah

installer, Grimes-Bartoletti

Distribute insulating materials evenly into small spaces within floors, ceilings, or walls, using blowers and hose attachments, or cement mortars.
Cover and line structures with blown or rolled forms of materials to insulate against cold, heat, or moisture, using saws, knives, rasps, trowels, blowers, or other tools and implements.
Fill blower hoppers with insulating materials.
Remove old insulation such as asbestos, following safety procedures.
Read blueprints and specifications to determine job requirements.

May. 2015 – Sep. 2015
East Leo, Vermont

landscaping/Manson, Gulgowski, McCullough and Wisozk

Break or cut bricks, tiles, or blocks to size, using trowel edge, hammer, or power saw.
Lay and align bricks, blocks, or tiles to build or repair structures or high temperature equipment, such as cupola, kilns, ovens, or furnaces.
Mix specified amounts of sand, clay, dirt, or mortar powder with water to form refractory mixtures.
Clean working surface to remove scale, dust, soot, or chips of brick and mortar, using broom, wire brush, or scraper.

Calculate angles and courses and determine vertical and horizontal alignment of courses.

Education

Mar. 2012

High School Diploma: basic study

Northern Nebraska Institute – East Sterlingshire, Washington

Skills

communication

Expert

team player

Expert

hard working

Expert

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

I am a very motivated, young individual who is mature for my age. I am dedicated and hard working when given a task or job to complete. I enjoy working with others, as I am charismatic, outgoing, and have great leadership skills. I am a fast learner and willing to learn more everyday. Completing tasks comes very easy to me, as I am motivated, good at listening, and follow directions appropriately.

Employment history

Dec. 2019 – Present
Wisozkmouth, Hawaii

Lawn Care, Hessel, Durgan and Will

Fresh Cut Lawn Care is a self-ran company, where I took care of all aspects of lawn care. My skills range from mowing grass, to designing land scapes and putting them together.

Jun. 2018 – Jul. 2018
South Roman, New Mexico

Installer, Wiegand-Mraz

I installed and fabricated duct work and worked on other HVAC equipment for commercial and residential jobs, and met the needs for all customers.

Mar. 2017 – Sep. 2017
Cronaton, Louisiana

Laborer, O’Reilly-Rosenbaum

My job was to handle task given to me by supervisor, such as cutting in electrical boxes and pulling wire.

Nov. 2016 – Jan. 2017
Ednamouth, Texas

Cook, Harber and Sons

I had to cook, prepare food and maintain a clean workspace. Occasionally I had to work in other areas of the restaurant, such as working in the ice cream section and running the cash register.

Education

Present

Associate of Applied Science: Welding Technology

Northern Utah Academy – Tabathastad, Mississippi

Apr. 2018

High School Diploma

Northern Tillman Academy – Port Everetteshire, Vermont

Skills

Welding

Beginner

Electrical

Beginner

Fire fighting

Skillful

HVAC installer

Skillful

Construction

Skillful

Maintenance

Skillful

Lawn Care

Experienced

Professional Summary

Employment history

Installer, Rath-Nader. Oberbrunnerland, Washington

Oct. 2017 – Jan. 2018

Read and interpret blueprints or specifications to determine size, shape, color, type, or thickness of glass, location of framing, installation procedures, or staging or scaffolding materials required.
Determine plumb of walls or ceilings, using plumb lines and levels.
Measure mirrors and dimensions of areas to be covered to determine work procedures.
Cut, fit, install, repair, or replace glass or glass substitutes, such as plastic or aluminum, in building interiors or exteriors or in furniture or other products.
Confer with customers to determine project requirements or to provide cost estimates.
Set glass doors into frames and bolt metal hinges, handles, locks, or other hardware to attach doors to frames and walls.
Install pre-assembled metal or wood frameworks for windows or doors to be fitted with glass panels, using hand tools.
Load and arrange glass or mirrors onto delivery trucks, using suction cups or cranes to lift glass.

Installer, Parisian-Olson. Bashirianview, North Carolina

Feb. 2008 – Dec. 2014

Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
Follow established safety rules and regulations and maintain a safe and clean environment.
Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters’ hand or power tools.
Verify trueness of structure, using plumb bob and level.
- Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter’s hand tools, or power tools.
- Fit, wrap, staple, or glue insulating materials to structures or surfaces, using hand tools or wires.
- Supervise, coordinate, or schedule the activities of construction or extractive workers.
- Read specifications, such as blueprints, to determine construction requirements or to plan procedures.
- Train workers in construction methods, operation of equipment, safety procedures, or company policies.

Read and interpret blueprints or specifications to determine size, shape, color, type, or thickness of glass, location of framing, installation procedures, or staging or scaffolding materials required.
Determine plumb of walls or ceilings, using plumb lines and levels.

Education

Northern Reinger College, Baileyburgh, Utah

High School Diploma, Genera Education, Sep. 2006

Skills

door installer

Experienced

Window Installer

Experienced

Glazier

Experienced

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Current college student looking for a foot in the door into the IT world with 5 years of experience dealing with computers and programs. Have knowledge and experience in most of the subjects of IT ranging from hardware, software to some coding. Looking to start an internship to complete my college degree and have a great time learning and growing.

Employment history

Dec. 2019 – Present
Macejkovicstad, Rhode Island

Installer, Wolf LLC

Installation of furniture, including:

Coordinate with other professionals, such as contractors, architects, engineers, and plumbers, to ensure job success.
Read plans, instructions, or specifications to determine work activities.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.

Dec. 2014 – Feb. 2015
North Chancestad, Hawaii

Mechanic, Jenkins, Adams and Kris

Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
Reassemble and test equipment following repairs.

Education

Present

Associate of Science: Information Technology

Southern Bernhard College – Rickeychester, Tennessee

Skills

HTML/CSS

Beginner

SQL

Beginner

Microsoft Word

Experienced

Excel

Skillful

Software/Hardware for PC

Experienced

Python

Beginner

Professional Summary

Employment history

Installer, Stroman-Conroy. Thompsonburgh, Utah

Nov. 2018 – Present

Measure, cut, thread, or bend pipe to required angle, using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines.
Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.
Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, or caulking.

Technician, Wintheiser, Mertz and Fadel. Treutelton, New Mexico

Oct. 2013 – Jan. 2014

Plan pipe system layout, installation, or repair, according to specifications.
Modify and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools, observation, or other methods.
Inspect, examine, or test installed systems or pipe lines, using pressure gauge, observation, or other methods.

Retail Assistant, Boyer, Erdman and Lowe. Trentshire, Arkansas

Aug. 2011 – Feb. 2012

Construct or assemble displays or display components from fabric, glass, paper, or plastic, using hand tools or woodworking power tools, according to specifications.
Supervise the activities of workers engaged in receiving, storing, testing, and shipping products or materials.
Stock shelves with products.

Education

South Daugherty Institute, Pazhaven, Missouri

References

Personal info

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Skills

Mechanically minded

Attention to detail

Ability to use a wide range of hand and/or power tools

Motivated, always willing to learn and can adapt to any working environment

Time management and organisational skills

Install control devices and wire devices according to control drawings

Inspect the surface to be covered to determine its condition, and correct any imperfections in preparation for new flooring.
Install new flooring in accordance with industry standards.
Practice safe working habits
Maintain tools and work vehicle

Coordinate with operations manager, to ensure job success.
Assemble and install moonwalks, tents, tables and chairs, using hand or power tools.
Took aware in problems preventing from getting the job done
Guided for the overall productivity of the team

Installed appliances, carpentry demolition, and drywall
Worked independently and collaboratively in activities of construction
Travel to customers’ premises to install, maintain, or repair fibre cabel and wifi
Lay underground cable directly in trenches or string it through conduits running through trenches. equipment or accessories.

Install basic residential coaxial cable wiring.
Drill penetrations for cables through floors, walls, etc.
Install and/or replace underground and aerial cable.
Work safely following all OSHA and OCC safety policies including basic ladder usag

ed3be1f7-eff7-4f49-b576-a68ecdd7ad22

Andrew Smith

Professional Summary

Employment history

Education

Skills

9be23969-4f3e-40e1-8cf2-b56aba5fdb3e

Andrew Smith

Professional Summary

Employment history

Education

Skills

55fb1c2b-c966-4715-bfd4-2d2835381fe4

Andrew Smith

Professional Summary

Employment history

Education

Skills

8af502aa-dbe9-4d5f-ad07-ff023bebb048

Andrew Smith

Professional Summary

Employment history

Education

Personal info

Skills

ebaacd00-31f3-4f00-8539-5bccc43619b5

Andrew Smith

Professional Summary

Employment history

Education

References

Personal info

Skills

f0c063f3-50e5-4412-8724-7c1290d04594

Andrew Smith

Professional Summary

Employment history

Education

Skills

8acb66b5-1624-470d-ae94-9a96ffd79292

Andrew Smith

Professional Summary

Employment history

Education

Personal info

Skills

880a4ee3-e329-446c-8cc7-4c959f53aea6

Andrew Smith

Professional Summary

Employment history

Education

Skills

d658d022-8e39-4c2f-8370-1293c360b00b

Andrew Smith

Professional Summary

Employment history

Education

Skills

41d2a980-a144-4101-9d87-542b64db2ef9

Andrew Smith

Professional Summary

Employment history

Education

Skills

685003a6-9ee4-4653-a613-917f42bce063

Andrew Smith

Professional Summary

Employment history

Education

Skills

Certifications

21d788cf-c435-4708-826d-e42854476a16

Andrew Smith

Professional Summary

Employment history

Education

Skills

Languages

6fda0585-87e6-4a66-89ba-688b85e28e2a

Andrew Smith