• In-house preparation of Health and Safety Plan where applicable.
• Identify, develop and implement practical HSE improvements.
• Ability to specify and manage the development of practical solutions to HSE problems
• Ensure all new and existing staff have undergone a thorough health and safety induction and have been issued with appropriate PPE necessary to undertake their duties safely. Record maintained in the site health and safety register.
• Chair weekly, monthly safety meetings and ensure the preparation of meeting minutes.
• Attend all other relevant meetings with project managers and the sub-contractors
• Educating the employees on safe work procedure.

• Responsible for safety measures in the facility as well as environmental protection.
• Helped to develop safety procedures and safety standards for TECO Middle East. 
• Coordinated with affiliated authorities to issue all required HSE Documents and certificates
• HSE Engagement activities, annually.  

• Designed safety strategies to meet company needs and supported implementation in reducing hazards
• Leads & assist daily meetings with the Rig managers, Senior Staff, Department Heads and Client Representative as required
• Coordinate & administrate ON-JOB Training based on HSE Training Matrix
• Monitor compliance of HSE orientation and induction for all personnel 

• Being fully conversant with the HSE requirements, Rules and Regulations of UAE. 
•  Advising, guiding and facilitating the Project Management, Supervisors and workforce on all matters pertaining to Health, Safety and Environmental Protection. 
• Reviewing and Update the HSE Plan and Risk assessment if necessary. 
• Monitoring HSE standards in the activities at sites and giving positive advice. 
• Carrying out all HSE activities as stipulated in the project HSE Plan and relevant action points as given in the Corporate HSE Plan. 
• Organizing in-house training and mandatory training to employees and keeping the records of the same. 
• Creating HSE awareness through posters, Wall charts and video’s. 

• Handling responsibilities of laying MDPE pipe for domestic (Meter GI.6 & Reg. 21mbar) connection.
• Responsible to review and confirm as-built to engineering for documentation.
• Flushing & Pneumatic testing of Network.
• Nitrogen testing of Network.
• commissioning of Network.
• making a decision in laying the MDPE pipe for proper flow of gas.

• Developed and Implemented off-shore emergency response plan and team.
• Reviewed operating procedures and insured the scope of work was in compliance with all regulatory bodies as well as Saipem standards.
• Facilitated audits and implemented action plans for items that surfaced from the audits findings.
• Directed training programs for new HSE Specialists including conducting training in multiple projects.
• Developed and Reviewed of Medical Emergency Response Plans (MERP’s), Community affairs and local content requirements.
• Performed Monthly and Quarterly HSE audits and Inspection at various project locations and ensures follow-up action until close-out
• Developed and facilitated implementation of multi-sector HSE management system governance process.

• Ensure all site operations always are compliant with the current relevant national local (Company’s Health and Safety Plan) and Client Policy/ies.
• Establish a good relationship with the client, consultant and sub-contractors, and counterparts within the firm.
• Lead in-house training with managers and employees about health and safety issues and risks.
• Keep records of inspections findings and produce reports suggesting improvements.
•  Maintaining records of incidents and accidents and producing statistics.
• Production and Maintenance of records of near misses, Incident and Accident Reports, relevant working permits and all other relevant health and safety records and statistics.
• Communicate the above records to planners for inclusion in the Monthly Reports.

•  Monitoring of the rejections and other nuisances during the realization of the projects (production/construction/maintenance). Risk assessment by different méthodes.HAZOP /FMEA /HIRA/JSA/TSTA. TRA.ORA. (Proces and Maintenance activity).
•  Risk management related to the various activities of the building site (earthwork, civil engineer, mechanical assembly, cryogenic tanks and sphere and vats, piping, pipeline, welding x-ray inspection, are connected with lines exploitation of gas, electric work, scaffolding etc). 
•  Activities HSE plan (training, HSE exercise, work permit ,LOTO procedure). Security management of ATEX area following the directives and international legislative decree and standards. ( ISM – ATEX 2E). 
• Co-ordination with the Client to ensure the satisfaction and clarifying issues related to the quality. 

• Plan, monitor and implement annual HSE programs in line with Corporate Strategy. Implementing ISO 14001:2004 (Environmental Management System) and OHSAS 18001:2007 (Occupational Health and Safety)
• Complete Level One documentation of PSM elements selected for DuPont
• Conduct studies and analysis, formulate and recommend policies and measures to reduce or eliminate accidents, health hazards and damage to life and property
• Receive feedback and analysis for different safety programs like D-level, MSA, PSSR, SOC Coordination meetings.

• Involve in the delivery of HSE documents for the Orsted’s project (Greater Changhua Array Cable Installation) (project on hold until further notice)
• Application the preventive maintenances of the Safety equipments and their followups in GMAO. 
•  Diagnosis, assistance and audit of pre certification to the frame reference of management OHSAS 18001, ISO 9001, ISO 1400. ( QSE System) 
• Analyse is exploited the results of the action plans compared to the objectives defined upstream after the realization of the statistical assessments.

• Involved in implementing the corporate environment, health and safety requirements for the unit 
• Responsible for Operation and maintenance of STP and  ETP 
• Risk assessment preparation, Accident reporting, Accident investigation, Analysis of Accident.
•  Supervision and follow-up on site, management of HSE tools. 

• Making a decision in plumbing G.I pipe with the proper route and clamping for the proper flow gas.
• Site clearance of G.I pipe laying & handling the responsibility of charging gas up to customer’s appliances and also shut down jobs.
• Pneumatric testing of G.I pipe and handling responsibility.
• Maintaining quality as per company’s safely norms, thus assuring quality work.
• Maintenance of MDPE & HDPE pipe.
• LDT(LEAK DETECTION TESTING) of Leakage Network.
• Consulting diagram and technical documentation such as schematics, manuals, and standards.

•  Follow – Up of wells maintenance operations, Clikline, Workover, Coiled Tubing .Wirline and surface installations. 
• Follow-up of drilling operations (inspection, audit and verification of the drilling rig, tools and fittings, as wells as all safety equipments, and determine causes and indices .of the coming and closing procedures with the entire drilling staf. 
• Carrying out post incident analysis, and establishing workplace safety and health committees, Knowledge of decontamination procedures and Ability to maintain .
• effective work relationships with people from all social backgrounds.

• Management and implementation of the QHSE plan. And QSE policy. 
• Preparation of large the Stops of production (Shut Down) for maintenance, of the hydrocarbon, facilities, HSE procedures, documentations and different strategy for HSE management.
•  Evaluation of the offers and selection of people receiving benefits. 
• Formalization and validation of the various procedures and HSE plan.
• Preparation and coordination of SIMOPS folder and start-up in accordance with the rules and procedures in force (regulation/ATEX standards) .And validation of the update of the MOS registry. And organization of tasks according to the MOS register.
•  Establish and implement the process safety management program (PSM). 
• Tracking and identifying the various anomalies on the ESD/ F&G system, Attend ESD operation tests. 

•  Developed and implemented company safety plans, procedures and manuals. 
• Oversaw production to ensure safe practices and equipment function.
• Recommended changes and alterations of processes to improve safety and health outlooks.
• Reviewed and updated HAZOP studies.
• Used strong management skills combined with engineering principles to control safety and health initiatives.
•  Provided support for Process Safety Management (PSM)  to ensure all processes ran smoothly.
• Performed routine evaluations to ensure safety requirements were adhered to.

• Educate the public about health issues or enforce health legislation to prevent disease, to promote health, or to help people understand health protection procedures and regulations.
• Examine credentials, licenses, or permits to ensure compliance with licensing requirements.
• Examine practices at green building sites to determine whether adherence to green building standards alters risks to workers.
• Investigate accidents to identify causes or to determine how such accidents might be prevented in the future.

• Identify and map the risk of accidents that might occur in the work environment.
• Apply occupational safety and health programs as preventive and corrective measures.
• Collect data related to ecological or human health risks at brownfield sites.
• Test or balance newly installed HVAC systems to determine whether indoor air quality standards are met.

• Apply new or existing research about natural ecosystems to understand economic and industrial systems in the context of the environment.
• Build and maintain databases of information about energy alternatives, pollutants, natural environments, industrial processes, and other information related to ecological change.
• Recommend corrective measures to be applied based on results of environmental contaminant analyses.
• Help direct rescue or firefighting operations in the event of a fire or an explosion.
• Conduct worker studies to determine whether specific instances of disease or illness are job-related.
• Maintain logbooks of daily activities, including areas visited or activities performed.
• Review records or reports concerning laboratory results, staffing, floor plans, fire inspections, or sanitation to gather information for the development or enforcement of safety activities.