• Observed and studied the features of Airbus A319-115 and ATR-42-500 under the supervision of maintenance engineers.
• Design and code visual interface for new product by HNP-Mikrosysteme
• Compile excel document of references to uses of companies products to aid other departments
• Present and explain the significance of the work I had done to company staff

• Prepare technical drawings and  specifications of electrical systems for installations.
• Direct or coordinate manufacturing processes through documentation to ensure compliance with specifications, codes and factory requirements.
• Inspect completed installations and observe operations to ensure conformance to design and equipment specifications.
• Design, implement, maintain, or improve electrical instruments majorly 3 phase motors
• Perform detailed calculations to compute and establish manufacturing or installation standards or specifications.
• Compile data and write reports regarding existing or potential electrical engineering works.

• Performed large amounts of manual software testing and management. 
• Installed and maintained a number of environments and tooling required for softwaredevelopment and testing. 
• Integrated large amounts of manual software tests into automated testing systems.
• Coordinate with other professionals engineers, to ensure job success.

• Developed user interfaces (forms, Layouts, Lifecycle, Bpm) using OpenText Process Platform i.e., Entity Modeling 
• Involved in developing forms according to given Mockups of the project. 
• Automation testing on OpenText Media Management(OTMM) Application. 
• Developed UI using KnockoutJS for Front-End Application. 
• Preparing test cases for Contract Center Application of Individual modules. 
• Involved in running the test cases in Ottr (OpenText Test Run) – Manual testing.
• Involved in Acceptance criteria testing, functional testing, and Regression testing.

• Assisted in designing and updating existing model for following water pump parts: Casting, Support base plate, and Fan case.
• Conducted simulation and analysis of the parts using Solidworks and ANSYS Workbench.
• Assisted Senior Engineer in creating proposal per client needs.
• Collaborated with design engineers to finalize technical drafts for motor parts to meet the safety standard. 

• Implementation of monitoring tool using Nagios XI under Raspberry Pi3: supervising computer parks and see if any equipments are in down state (computers, routers, switches)
• Update a customer website (HTML/CSS)
• IT audits (on-site working): evaluation of the security of customer’s computer parks in order to improve it if necessary
•  Assists engineers with projects, gaining practical experience and knowledge.

• Preparation and organization of tests on a test bench and in a vehicle
• Preparation and execution of measurements on belt drive
• Evaluation of measurement results
• creation of presentations
• Evaluation of mechanical parts

• Learned about selection of complete hardware and design, including development of network architectures for Simatic PLC, HMI and SCADA Systems.
• Engaged in software development utilizing wide range of technological tools and industrial Ethernet-based protocols.
• Monitored and processed information for regulatory compliance, working closely with environmental engineers, advisors and other business units. 
• Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering.

• Automated the process of board characterization using a Real-Time Spectrum Analyzer and a Signal Function Unit to test company-developed boards for market standards using Python
• Received training on Television White Space Communication and its broadband services
• Implemented NLP and Deep Learning algorithms for profile verification services.
• Design REST API and algorithms for SpringParse and SpringVerify services.

• Understand basics of industrial scenario with ongoing processes
• Study of various departments i.e. Inspection, Assembly Line, Testing etc.
• To find out the faults in failed components and provide practical approach for its solution.
• Use computers for various applications, such as database management, or word processing

•  Supervision of National Grid through SCADA system at the Juja National Headquarters 
•  Substation Maintenance of feeder units and circuits(400kv) 
• Maintenance of overhead and underground power lines 
• Emergency response Unit 

• Conducted collaborative meetings with clients, professionals, and other firms.
• Facilitated and executed small-scale land surveys and infrastructure designs.
• Investigate equipment failures and difficulties to diagnose faulty operation, and to make design recommendations to manufacturing engineers.
• Study industrial processes to determine where and how application of automation processes can be made.

• Performed troubleshooting duties to assist senior engineers during different workshops.
• Assessed different robotic products for problems and resolved any issues with them.
• Worked on a variety of microcontrollers (Node MCU, Aero-Quad, Arduino UNO, Arduino Mega)
• Interfaced different sensors (Sonar, Motion, Line-follower, DHT-11, Moisture and Pulse sensor)
• Performed extensive soldering and assembling of different robots (Line-follower, Robo-Soccer, Quadcopter, CoDrone, NED and BOB)

• Successfully learn on reading PFD and P&ID of the fatty acid manufacturing process.
• Review the drawing of 2 processes and determine the most effective setup.
• Network simulation using NS3 software
• Linux

•  Assisted with the implementation of a $125 million bridge lighting program.
•  Identified locations where ongoing steel repairs would interfere with planned lighting.
•  Implemented Contract Manager/Construction Management software to track submittals and Requests for Information (RFI’s) from the client.
• C++ Programming

• Assist design engineers in fundamental analysis related to geotechnical design. 
• Study and review work done by consultants or other relevant parties to ensure that objective, cost and time target are met. 
• Support drafters in preparing report and drawings. 
• Investigate equipment failures and difficulties to diagnose faulty operation, and to assist the maintenance crew.

• Understand the complete working of the process of how  various engine bearings are made by observing and studying about the manufacturing processes.
• Assist drafters in developing the structural design of products using drafting tools and computer-assisted design (CAD) using SOLIDWORKS.
• Worked as a Trainee Civil Engineer, started out as junior site engineer responsible for inspection, documents and assisting senior engineer.
• Performed on-site survey & wrote technical narratives in an efficient & timely manner.

• Pioneered the introduction of a new automated motor system for roller shuter doorswhich reduced electricity consumption by 35%.
•  Pan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization.
• Install and service boom gates, automated roller shutter doors and security systems
• Assist on project delivery and help on drafting for existing as well as new project

•  Implement test harness suites to trigger, monitor, and verify software call-flows for the Cloud Team.
•  Design APIs to facilitate deployment procedures, enhancing reliability and speeding up the process.
•  Engineered the back-end server of a full-stack Interop Web APP, which provides the Operations Team with a remote verification tool without the need of coordination with engineers.
• Developed MATHCAD design tool capable of designing six different scrolls

• Preparation of reports  
• Technical visit to the customer  
• Data collection  
• Analysis, execution and verification of architectural projects

• Direct and coordinate activities involving sales of manufactured products.
• Increased system operating speed by 15% through changing the code.
• Provide technical support and services for customers.
• Work with personnel and facilities management staff to install, remove, or relocate user connectivity equipment and devices. engineers.

• Take samples to assess the amount and quality of oil, the depth at which resources lie, and the equipment needed to properly extract them.
• Coordinate activities of workers engaged in research, planning, and development.
• Trained to look over the logs and gained knowledge on how to interpret them and also got an insight about the advanced logs like UBI, FMI, ASI.
• Acquainted to the working of different devices like Gas Chromatography, 

• Configuration of Routers, Readers and anels.
• Troubleshooting at sites.
• Connection and checking of outgoing system for installations.
• Managing inventory.
• Raising Purchase Orders.
• Creating invoices.