df1caffc-9dcc-432f-b62f-294df20ce7ae

Andrew Smith

287 Custer Street, Hopewell, PA 00000
[email protected]
(000) 000-0000

Professional Summary

A reliable, trustworthy and conscientious Electronic technician with over seven years of experience in industry who is able to multi-task, handle pressure, work as part of a team and most importantly able to fully complete projects. Is not afraid to tackle the most difficult tasks and has a combination of skills and quick thinking ability to deal successfully with IT issues. Has an eye for quality and can spot problems before they happen. Is able to pick up new concepts quickly and can make an immediate contribution to a team.

Employment history

Electronic technician, Moore Group. Terryland, Oklahoma
Jan. 2015 – Jan. 2017
  • Prepared, planned and supervised the installation of commercial wiring for providing critical electric and utilities capabilities to combat operating forces.
  • repair electrical wiring or equipment
  • Identify electronic problems with a variety of testing devices
  • Solder wires, pins, and components onto circuit boards and electronic components
  • Isolate, test, and calibrate temperature set points and psi specifications
  • Troubleshoot and repair machines and accessory sub-assemblies down to the component level
  • Knowledge and ability to setup and operate lathe, drill press, band saw, and various hand held power tools
  • Experience and knowledge of Microsoft word, Microsoft excel, and various custom programs used to install, communicate, and control machines

Electronic Assembler, Moore Group. East Mollybury, California
May. 2014 – Aug. 2014
•Installed and replace the damaged PCB components, such as Capacitor, resistors, IC.

•Repaired electrical parts, installed new cable, wires, hand soldering wire to connector.

•Followed schematics assembly drawings and technical prints in assembly process.

•Connected and soldered electrical cables and wires per project requirements.

•Assembled prefabricated electromechanical components and sub-assemblies.

•Tested all completed electronic products and sub-assemblies.

•Maintained utility cleanliness and safety of all assigned equipment and tools.

•Marked and drilled holes in specified locations in boards to mount control units.

•  Mounted resistors, transistors, capacitors, integrated circuits, sockets and transformers on                      chassis panel.

•  Assembled, modified and repaired wire harnesses and circuit card assemblies.

Education

North Gerlach, Rippinside, Wyoming
Bachelor of Science, Electronics Engineering, Nov. 2010

Eastern Hoppe College, South Eugenioland, Oklahoma
Associate of Science, General Electronics, Apr. 2005

Donnelly Academy, Stewartville, Mississippi
High School Diploma, General Electronics, May. 2002

Skills

PLC
Skillful

Soldering
Experienced

WHMIS
Experienced

First Aid & CPR
Skillful

Driver
Experienced

9db1dc7d-2ebb-46b6-8aa8-25713c84c56c

Andrew Smith


Phone:

(000) 000-0000

Email:

[email protected]

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Seasoned electronic engineer offering 15 plus years of expertise in the area. Successful in repairments, design, and development of many electronic products. Highly skilled in solving complex math and physics problems, teaches University students mathematics during free time. Adapts to new work environments rapidly from the past experience of switching many workplaces.  

Employment history

Jun. 2019 – Present
Wittinghaven, South Dakota
Electronic technician, Blick, Oberbrunner and Hickle

  • Owner of Laptop Repair Direct
  • Repair Electronic Circuit board and device for different Company: Tyco Safety Products Canada Ltd., Omesh network Inc., KingTiger Technology (Canada) Inc., Lanner Electronics, Artisan Classic Organ Inc., Micro-Bonds Inc., Urtech Manufacturing Inc., Stim Canada Inc., etc.
  • Troubleshooting and repairing laptops and other electronics device In component level

Apr. 2016 – May. 2016
Lake Danaburgh, Minnesota
Hardware Technician, McDermott Inc

  • Main responsibility is hardware debugging, trouble shooting and repairing computing systems and computer complements 
  • System integration and full functionality testing
  • Performs hands on engineering tasks wherever required for completion of product development, contributing to efforts to build prototype hardware

Sep. 2011 – Oct. 2013
Winstonburgh, South Carolina
Electronic Engineers, Leannon-Hansen

·       Involved developed of RapidMesh OPM15 Development Platform, including HW/SW
·       Perform field and system test in The Markham Convergence Centre
·       Setup and technical support for Niagara Falls smart street lighting system project with Omesh networks products

Dec. 2007 – Oct. 2009
Kelseyton, Alabama
Electronic technician, Beahan and Sons

·       Repair laptop motherboard in component level
·       Functional test for laptop motherboard

Mar. 2003 – Sep. 2003
Cornellshire, New Mexico
Embedded System Engineer, Gleichner-Lockman

·       Porting bootloader and linux kernel to the board
·       Porting the solo applications software from VxWorks to Linux.
·       Developing and testing applications software for the new feature of Solo
·       Customization of on board Ethernet/IP subsystem, virtual IPs, routing traffic through internal vlan, debugging

Nov. 2001 – Jun. 2002
Terrenceview, West Virginia
Electronic Technician, Cassin, Hettinger and Walsh

·       Repair PCB board
·       In circuit test for circuit board

Jul. 1997 – Nov. 1999
Vikiberg, Oregon
Computer Network Engineer, Schaden and Sons

Involved several projects of computer networks for customers
·       Installed, configured, and tested network devices and servers 
·       Connected equipment to networks
·       Examined equipment and systems to find and repair faults 
·       Updated and maintained existing equipment 
·       Assisted with selecting sites for equipment 

Aug. 1992 – Dec. 1995
Prosaccoland, California
Electronic Engineers, Hahn, Rippin and Herzog

Involved in several project of developing electronic products and systems
·       Designed electronics circuit and PCB
·       Conducted prototype manufacturing
Involved in several project of measurement and control system
·       Developing real-time OS and application software with C, Pascal and Assembler
·       System function test and troubleshooting
·       Field installation/testing

Education

Jan. 1991
M.D.: Electronic engineering

  • West Conroy College – New Normandshire, Arizona

Jan. 1988
Bachelor of Science: Electronic engineering

  • Southern Cole – Wisokyview, Iowa

Skills

Mathematics
Expert

Chinese (Mandarin)
Expert

PCB debugging/design
Expert

Electronic engineering
Expert

Repair, debugging, and troubleshoot of circuit boards
Expert

Physics
Experienced

Motherboard repairment and testing
Expert

Electronics repairment and troubleshooting
Experienced

c1b86d7b-09db-4202-89d0-f2050cb48e22

Andrew Smith


Phone:

(000) 000-0000

Email:

[email protected]

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

CCTV cameras and IT infrastructure installation technician offering 7 years of experience performing Surveillance cameras, IT infrastructure and Bio Metric Devices. Expert at installing, relocating, and troubleshooting service issues and implementing lasting solutions.  Driven, accomplished professional dedicated to providing exceptional customer service at every interaction.

Education & Certifications

Feb. 2014
IELTS

  • The Ernser – Sheilastad, Wyoming

Jul. 2013
Microsoft Certified IT Professional: Information Technology

  • North Schroeder – West Anastasiaburgh, Utah

Apr. 2011
DAE(Diploma Associate Engineering): Electronics

  • East Larkin College – Kreigershire, Mississippi

Employment history

Mar. 2018 – Present
West Del, New York
Electronic Technician, Schumm Inc

Job Responsibilities Technician:
  • Plan layout and prepare technical drawings.
  • Suggest equipment according to standards and customer requirements.
  • Integration and Configuration of surveillance cameras according to Rules and Customer requirement. 
  • Maintenance of installed surveillance.
  • Installation and configuration of bio metric attendance device & bio metric door locks.
  •  Installation of network infrastructure (wired and Wireless). 
 
    
  

Apr. 2015 – Jul. 2015
Port Lawrenceville, New Mexico
Asst. Engineer, Paucek-McGlynn

Job Responsibilities Asst. Engineer 
  • Prepare technical drawings, specifications of  Projects and operations conform to standards and customer requirements.
  • Installation and Configuration of CCTV cameras.
  • Installation and configuration of bio metric attendance devices and bio metric locks.
  • Installation of network infrastructure.
  • Maintenance of installed systems.
  • Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards.

Sep. 2013 – Dec. 2013
Lake Joslyn, South Carolina
IT Incharge, Gusikowski Group

Job Responsibilities as IT Incharge
  • Keep maintain computers (Server and Clients) and Networking.
  • Keep Maintain CCTV Cameras. 
  • Data Entry in Software. 
 

Dec. 2011 – Feb. 2012
West Melodieview, Hawaii
Senior Technician, Gleason Group

Job Responsibilities Senior Technician
  • Installation and Configuration of CCTV cameras.
  • Installation of Network and Telephone exchange

Skills

Microsoft office

Adobe Photoshop

Online Marketing

electronic technician

  • Repair Electronic Circuit board and device for different Company: Tyco Safety Products Canada Ltd., Omesh network Inc., KingTiger Technology (Canada) Inc., Lanner Electronics, Artisan Classic Organ Inc., Micro-Bonds Inc., Urtech Manufacturing Inc., Stim Canada Inc., etc.
  • Troubleshooting and repairing laptops and other electronics device In component level

electronic technician

  • Translation of technical documents such as Service Manuals, Electrical Schematics and Bill of Materials;
  • Give technical training to suppliers and customers about the Split and TV segment;
  • Communicate with Chinese factories about technical informations contained in the documents needed to make our technical instructions.
  • Owner of Laptop Repair Direct

electronic technician

  • Designed and fabricated prototype power supplies for new application
  • Tested prototypes along side Engineering
  •  Used various test equipment
  • Ran test for UL And CSA approval

electronic technician (permanent contract)

  • HMI-SCADA programmer, PLC programmer for startup machines or plants in Italy, North America and China; 
  • Service after startup; 
  • Process control for annealing- aging ovens; 
  • teaching customer operators about maintenace and process new machines.

electronic technician

  • Responsible for initial check up or trouble shooting of incoming appliances of customer
  • Repair and fix the appliances
  • Repair an electronic part in vehicle
  • Using SAP ERP System to manage business processes through a unified system

electronic technician (permanent contract)

  • PLC-HMI programmer to startup foundry machines or foundry plants In Europe and Asia;
  • Service post start up;
  • Supervision engineering electrical and electronic for new plants;
  • Process control for foundry aplications; 
  • Supervision of the electricians team in place for wiring machines and plant; 
  • Teaching customer operators about maintenace and process new machines.

electronic technician

  • Pioneer team that supported factory start-up
  • Supported initial machine installation/set-up and protocol for both GD and Hauni cigarette-making/packing machines (during factory start-up)
  • Provide on-time technical support during production
  • Perform machine troubleshooting of PLC faults and/or other electrical/electronic breakdowns
  • Ensure proper machine functionality for detection of quality-related issues
  • Carry-out preventive maintenance duties and parts replacement/inventory
  • Create reports on machine breakdowns and recommend corrective/preventive actions

electronic technician

  • Set up database backup and or recovery processes.
  • Experienced with the process of ordering and receiving repair parts from the authorized distribution Centre as well as processing the unrepairable, damaged parts of the electronic devices.
  • Trained to conduct Beginning of Day (BOD) and End of Day (EOD) operations during the operational hours of the shift.
  • Familiar with providing an effective customer service experience to clients and assuring the best service possible for their devices.

electronic technician

  • Electronics Technician aboard the USS Francis Scott Key SSBN 657 (nuclear submarine).
  • Held the rank of E5 – 2nd Class Petty Officer.
  • Repair, test and maintained electronic navigation, radar and electronic warfare equipment.
  • Received muliple Letters of Recognition from U.S. Naval Admirals.
  • Held multiple security clearances with the highest being Top Secret.
  • Received an honorable discharge.

senior electronic technician

  • Perform repairs and tests on electronic equipment
  • Maintain the machine in good working condition
  • File reports and updates in computer
  • Experience and knowledge of Microsoft word, Microsoft excel, and various custom programs used to install, communicate, and control machines

electronic technician

  • Skilled in conducting computer, mobile and gaming consoles diagnostics to provide subsequent repair for electronic devices.
  • Conducting computer, mobile and gaming consoles diagnostics.
  • Ordering and receiving repair parts from the authorized distribution Centre.
  • Carrying out physical Inventory Counts for maintaining a proper stock of materials.
  • Trained to conduct the diagnostic and repair of Samsung, Google and LG authorized devices.
  • Familiar with processing repair leads from third party device insurance companies.
  • Skilled to provide Software and Hardware upgrade to devices and re-installing Apple, Windows and IOS Operating System.

electronic technician

  • Prepared, planned and supervised the installation of commercial wiring for providing critical electric and utilities capabilities to combat operating forces.
  • repair electrical wiring or equipment
  • Identify electronic problems with a variety of testing devices
  • Solder wires, pins, and components onto circuit boards and electronic components
  • Isolate, test, and calibrate temperature set points and psi specifications
  • Troubleshoot and repair machines and accessory sub-assemblies down to the component level
  • Knowledge and ability to setup and operate lathe, drill press, band saw, and various hand held power tools

electronic technician

  • Plan layout and prepare technical drawings.
  • Suggest equipment according to standards and customer requirements.
  • Integration and Configuration of surveillance cameras according to Rules and Customer requirement. 
  • Maintenance of installed surveillance.
  • Installation and configuration of bio metric attendance device & bio metric door locks.
  •  Installation of network infrastructure (wired and Wireless). 

electronic technician

  • Reassemble and test equipment following repairs.
  • Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions.
  • Adjust system controls to setting recommended by manufacturer to balance system, using hand tools.
  • Assist with other work in coordination with repair and maintenance teams.