electrician

  • Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings.
  • Install heat trace around outdoor plumbing.
  • Bending thin and heavy wall EMT for installation.
  • Identify common electrical tools and various fittings related to electrical work.

electrician

  • Installed 120 volt and 220 volt circuits.  
  • Replaced light fixtures and ballasts.
  • Assemble and install electrical components, units, subassemblies, and wiring.
  • Adjust, repair, or replace electrical components to repair faults and to ensure compliance to Australian standards.

electrician

  • I learned about latest and upgrade printing Machines.
  • Plan layout of electric power generating plants or distribution lines or stations. 
  • Adjust functional parts of devices or control instruments.
  • Compare logic element configuration on display screen with engineering schematics and calculate figures to convert, redesign, and modify element.

electrician

  • Trouble shoot electrical systems (120v, 240v ,480v) motors and controls
  • PM mcc buckets ,test breakers and starters 
  • Perform Ductor and megging test on cables and bus bar
  • Install temporary transformers and panels for the mcc during unit outages 
  • Terminate panels
  • Replace start/stops
  • Update lighting to LED

electrician

  • Assist engineering team with development and construction of initial prototypes
  • Develop manufacturing processes for mass production by the assembly team
  • Conduct test procedures on products and product sub-assemblies 
  • Install, maintain and repair manufacturing equipment

electrician

  • Install and repair electrical equipment
  • Repair plant telephones
  • Run conduit for electrical equipment
  • Variable Speed Drives / Motor Control Wiring & installation

electrician

  • Inspect and install electrical circuits. including but not limited to lighting and circuit breakers.
  • Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures during deployment.
  • Traveled to various sites to inspect and verify required equipment and supplies.
  • Discuss projects with managers, and draw up detailed specifications.

electrician

  • Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with code.
  • Circuit breaker corrective maintenance.
  • Good knowledge of heating and air conditioning systems.
  • Good knowledge of various test equipment.

electrician,(house wiring)

  • Install, maintain and repair electrical control, wiring, and lighting systems.
  • Read technical diagrams and blueprints.
  • Perform general electrical maintenance.
  • Inspect transformers and circuit breakers and other electrical components.
  • Troubleshoot electrical issues using appropriate of testing devices.
  • Repair and replace equipment, electrical wiring, or fixtures.
  • Follow National Electrical Code state and local building regulations.

electrician

  • Underground electrical hookups for mobile homes
  • Set poles for meter loops
  • Build and hang two hundred amp meter can/breaker box loops
  • Run circuits for a/c, well, and septic
  • Hookup underground electric in breaker box
  • Resolve electrical plug, switch, and breaker problems
  • Load material every morning 

electrician / electrical engineering

  • 8000hr Electrical Apprenticeship.
  • Certified Registered Electrician.
  • Residential, commercial, industrial. 
  • Lineman troubleshooting (inc. callout) and repairs.
  • High voltage (11kV-33kV experience).
  • HV switching (ABS, DDO, OCB).

electrician

  • Maintain and repair specialized equipment and machinery found in cafeterias, and kitchens.
  • Inspect drives, motors, and belts, or perform other maintenance actions.
  • Assemble, install, or repair wiring, electrical or electronic components.
  • Remove snow from sidewalks, driveways, or parking areas, using snow shovels, and spread snow melting chemicals.

electrician (executive)

  • 33 KV Substation Operation.
  • 1250/750 KAV DG.Operation & Maint.
  • All types of Starter Maint.
  • AC Drive Maint.
  • All General Electrical Work.

electrician

  • ⦁ Checking materials for conformance to specifications⦁ Fault finding on EMIS Panels ⦁ Installation of LED Lights⦁ Cleaning electrical components and panels⦁ Obtaining error code interpretation documents⦁ Flame proof on EMIS panels⦁ Motor maintenance ⦁ Lock-Out procedure on 1000V⦁ Marking or tagging of cables for identification⦁ Isolating electrical hazards in accordance with safety procedure⦁ Verifying circuit isolation⦁ Confirming circuits against specifications ⦁ Interpreting circuits, drawings specifications and instructions⦁ Using measuring instruments for checking components⦁ Energising and testing installation⦁ Completing reports and documentation using short descriptions or comments⦁ Using power tools like angle grinders and drills ⦁ Cable jointing ⦁ Locking of cables for safety⦁ Installing water pumps  ⦁ 380V Contactors installation and Circuit breakers ⦁ PLC programming ⦁ Installing telephones⦁ Installation of 12V DC Pull-keys⦁ 3 Phase Motor installation 110A and Earthing
  • Assisting with the manufacturing of inverter sub-assemblies, connecting power cables, identification and mounting of electronic components, checking and connecting auxiliary voltage transformers and junction box supply.
  • Maintaining a clean and safe working environment.
  • Working with both power and hand tools.

electrician

  • Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
  • Performed electrical system installation of conduit, wire, power distribution, and motor controls.
  • Installed, tested and modified circuit breakers, controls, light and motors.
  • Inspected electrical systems, equipment and components to identify hazards, detects and repair requirement.
  • Maintained safety of electricall work and systems using test meters.

electrician

  • Overhaul switchboard maintenance and repair
  • HV and LV circuit breaker maintenance
  • Inter-trip and relay testing
  • Transformer maintenance
  • Generator and GCB maintenance
  • Fibre and communication
  • Hazardous area installation, maintenance and repair

electrician

  • Daily routine round the plant any abnormality on motor sound & starter immidatiely take action to minimize down time. 
  • troubleshooting of star-delta starter & replacement of three phase motors and basic knowlwdge of abb vfd & reset of plc,installation of read switch pnp & npn sensors
  • changing of carbon brushes of dc motors
  • mannual charging of oil ckt braker 
  • maintainance of overhead crane slip ring motors & limit switches and starters 

electrician

  • Wiring of electrical panels
  • Fault finding
  • Industrial electrical installation
  • Switchgear installation and maintenance
  • Residential installations

electrician

  • To check the relay’s operation and exchange if it is not working.
  • Repairing the motor winding and also some major or minor issues that may cause supply problems.
  • mostly the work will done with motors, relays, circuit breakers etc.,
  • perform electrical utility services and base for new building.

electrician

  • Created documentation for installation process witch increased team efficiency.
  • Consistently working the code on all projects, utilizing drawing and manuals.
  • Oversaw project management, including diagnosis wiring and OSHA compliance.
  • Created a safety and clean environment of working area.
  • Able to read and lay out blueprints.
  • Able to dig  tranche, bend and ruining pipe and pulling wire.
  • provided outstanding services to new and longstanding customers by attending closely to concerns developing solution.

electrician

  • troubleshoot all electrical problems
  • installation of electrical and lighting system, power layout and test electrical system and continuity of circuits in electrical wiring
  • cable pulling, installation, cable tray and fabricated support
  • commit to compliance with all safety standard and regulation 

electrician

  • Domestic and commercial electrical maintenance.
  • Leading hand on large Commercial Maintenance contracts, some include Commercial venues such as Pubs & clubs, Coffs Harbour Council chambers, SCU University campuses both NSW & QLD, Numerous State Schools on the mid north coast, Sawtell RSL Club, Coffs Harbour Base Hospital and the NSW Marine Science Centre just to name a few.
  • Renovations, Extensions and New Constructions Security Systems (CARDAX), CCTV and IP Cameras. 
  • Phone and Data Installations.
  • Pump Station Board wiring   

electrician

  • Fabricate electrical equipment and assemblies such as panels, CSTE’s, transformers and distribution cabinets.
  • Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and current codes.
  • Install and test circuit breakers, lights, motors and various power circuits.
  • Experience with various types of cableways, conduits and other electrical raceways.
  • Diagnose malfunctioning systems or apparatus using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
  • Work from ladders, scaffolds, roofs or lifts to install, maintain, or repair electrical wiring or equipment.
  • Perform physically demanding tasks, such as digging trenches, bending conduit, and moving or lifting heavy objects.

electrician

  •  Ran wiring on new construction and remodels on residential homes. 
  • Bent conduit, installed receptacles and fixtures. 
  • Dealt personally with customers to ensure satisfaction. 
  • Responsible for maintaining a safe and clean environment. 

electrician

  • Do electrician work such as trunking work, lay cable, install panel, glanding and termination work.
  • Involve in Fire Alarm work.
  • Do wiring work, termination and installation for fire alarm system in RAPID project.
  • Involve in Loop Diagnostic Check for Fire Alarm System and assist in pre-commissioning.
  • Familiar with AS-2000 software to do loop check for Autonica Device.
  • Salary: RM4,500 per month (Hourly Rates)

electrician

  • Maintained organization, cleanliness and safety in all work areas
  • Worked in team-based environment to accomplish projects
  • Inspected existing wiring to identify problems such as short circuits
  • Reviewed blueprints and electrical schematics to perform tasks to specifications

electrician

  •  Plan layout and installation of electrical wiring, equipment and stuffs, based on job specifications and local codes. 
  •  Read technical diagrams and blueprints 
  •  Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes 
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites

electrician

  • Developed and organized in the building of a new HGU Unit at holly frontier for contractor PCE
  • Worked in high dangerous places while running 3/4 – 4″ RIgid pipe for lighting and power in the HGU unit 
  • Used plans for the job to run the rigid pipe and pull the necessary size wire to the panels  and or lights
  • Created pipe wracks and wire trays 
  • Ran heavy equipment and lifts during this job and was safety certified. Always put safety first over any thing that had to be done 
  • Worked hard every day and coordinated with fellow employees to keep the job going

electrician

  • Run conduit in new and existing units
  • Install cable tray
  • Pull cable
  • Install supports
  • Lights
  • Mount Boxes
  • Gathered required tools and equipment for each task to increase efficiency 

electrician

  • providing quality electrical services for Industrial and Commercial site in addition to servicing smaller domestic clients.  Expertise  in designing and installing control panels, preventative electrical maintenance and emergency breakdowns.
  • designing, installing and maintaining electrical works for small businesses and buildings.Shop fit outsNew building developmentsOffice refurbishmentsTest and taggingFault finding
  • Home AutomationFull kitchen renovationsGeneral electrical maintenanceLight and power repairsInstallation of additional lighting and power outletsSecurity cameras and lighting installationSensor light installationsBathroom heater/fan/light unitsCeiling exhaust fansCeiling fansLED downlight upgrades and new installsSmoke detector installation and repairsSafety switchesSwitchboard upgradesMeter box relocationsSingle phase to three phase upgrades
  • Planned layout and installation of electrical wiring