electrical engineer

  • Preventive maintenance cum troubleshooting and operation of SCR house (Make- RULLING ELECTRICAL).
  • Preventive maintenance cum troubleshooting and operation of Synchronizing house (Make- PMAS) 
  • Preventive and shutdown maintenance of RT motor (YP123) 800 H.PPreventive and shutdown maintenance of CUMMINS KTA 19-G9 (500 KVA) Engines.
  • Proficient with VFD SIMOVERT VECTOR CONTROL (Make-Siemens), Inverter & Rectifiers (6SE7041) ( Make-Siemens).
  • Worked on MONGOOSE PT Shale Shakers and Mud cleaners 2.2 KW motor.
  • Worked on Electromagnetic Brakes (23KW) Make- Shanghai sheng tone petroleum machinery model- (DWS-70).
  • IGBT familiar with Infineon, ABB, Rosshill.

electrical engineer

  • Designs and installation of residential electrical networks. 
  • Issue of work permit line clearance to work on electrical distribution network.
  • Experience of Testing, site commissioning and installation of ESP.
  • Worked on Air compressors (Make-SULLAIR LS12, 50 H.P).

electrical engineer

  • Controlling maintenance tools, stores and equipment.
  • Improving health and safety policies and procedures.
  • Aware of electrical safety standers.
  • Lockout, Tagout of electrical switch gears during work as per INDIA standard.

electrical engineer

  • Involved with Delta Engineering Company in organizing and executing the industrial and commercial projects in all aspects of its design, feasibility, material selection, quality control, supervision, testing and commissioning. 
  • The projects were designed & put into services efficiently for Sub-Stations, Textile, Pharmaceutical, Oil and Chemical Industries; Institutional Buildings, High-Rise Buildings etc. in the following. 
  • Electrical schematic drawing studies and problem troubleshooting.
  • Carrying out routine scheduled maintenance work and responding to equipment faults and diagnosing breakdown problem.

electrical engineer

  • Provide safe and positive isolation of Electrical drives HT and LT, Transformers, HT & LT Boards.
  • Coordinate with vendors in commissioning & testing activities.
  • Inspection of control and relay panel, preparation of Test reports for sub-station, power plant and process plant.
  • knowledge of various codes & standards.

electrical engineer

  • Project coordinator for Belagavi division One time maintenance(OTM) project of IP lines.
  • Drawing single line diagram using Auto Caed softwere.
  • Preperation of project report.
  • Preperation of LC planning for HT & LT lines foundations,Poles erections,restringing and reconducting of lines,Distribution Transformer maintenance and installations.
  • Handle personnel create safety environment to who is working n site.

electrical engineer (internship trainee)

  • Documentation of Quotation and Maintenance of Generator
  • Maintenance and Troubleshooting of Feeder Pillar to eliminate components malfunctions 
  • Writing reports and compiling data regarding existing and potential electrical engineering projects 
  • Experience of cable schedule & termination schedules, HT & LT cable joint & termination.

electrical engineer

  • Testing, Commissioning and Maintenance of varies electrical equipment like HT and LT panel PCC, MCC like 415V L&T and GE, 6.6KV schneider electrical, 33KV and 220KV GIS Siemens make.
  • In switch Gears in varies CT, PT, Different Circuit Breakers, Control wiring, Control transformer, Bus duct, Protection relays.
  • In transformer 415V/6.6KV, 6.6/33KV, 33/220KV (213 MVA, 174 MVA, 105MVA, 16MVA, and 2.5 MVA) and auxiliary & protection system.
  • In transformer check of IR, WR, Ratio, magnetizing current, core balance, vector group, Bucholz relay, NGR, PRV, SRV, SEF, Stability, N2 fire protection system.
  • Transformer oil testing like BDV, PPM and DGA.
  • Knowledge about DG set, Battery charger, UPS, Battery bank.
  • Some special test like Ten delta test, High pot on cable and Bus duct, stability test on HT motor, VLF and PD test on HT cable.

electrical engineer

  • Preparation of basic designs/drawings to perform engineering tasks along with technical specifications, bill of quantity & cost estimation for execution of project.
  • Direct or coordinate manufacturing, construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications & projects completion.
  • Project production efforts to assure projects are completed on time and within budget.
  • Purchase of material required and provide contract works with implementation through SAP.

electrical engineer

  • Evaluated installed electrical equipment and systems to isolate faults and implement corrective actions.
  • Calibrated weigh-scale, boiler and refrigeration plants instrumentation equipment on operation and preventive maintenance time basis, effectively reducing downtime.
  • Troubleshot electrical equipment problems such as elector-valves and sensors.
  • Performed load calculation for sizing wire and circuit protection.
  • Set up and operate specialized or standard test equipment to diagnose, test, or analyze the performance of electrical motors and machine components, assemblies, or systems.
  • Select instrumentation equipment, components, or systems to meet functional specifications.

electrical engineer

  • Design of entire electrical system from the initial architectural stage.
  • Prepare preliminary design report on the basis of client requirements and considering budget conform to standards.
  • Prepare final design report with detailed drawings, BOQ and specifications.
  • Participate in the bidder finalization meetings.
  • Review the technical submittals and shop drawings from the contractor.
  • Regular onsite inspections will be conducted to ensure the quality of work and to avoid deviations from design/approved documents.
  • Inspect the capital equipment at factory to ensure whether they are in line with specification and requirements.

electrical engineer

  • Project leader
  • Electrical Master Planning 
  • Assisting with client technical and testing requests during customer inspection in factory and to conduct closing meeting once testings are done.
  • In charge of electrical drawing preparation for cost reduction project (Auto Lubrication) in order to reduce spreader maintenance cost.

electrical engineer

  • Tender evaluation and report writing
  • Detail design drawings using AutoCAD
  • Contract management
  • Project management

electrical engineer

  • Preparement of electrical circuit diagram for crane spreaders ranging from STS45, YSX45E, SSX45, STR45 and also test panel diagram.
  • Preparement of electrical BOM (Bill of Material) list and release in Vault for component purchasing purpose.
  • Preparement of PLC program for Test Panel units.
  • Codesys program preparement (template based) for designs requiring Bromma SCS4 (Spreader Control System 4).
  • Electrical issues troubleshooting help with technicians during spreader functional testing.
  • Updating electrical drawing as per QSR (Quality Service Report) and commissioning report by service engineers.
  • In charge of preparation of customized electrical drawings on All Electric Yard Spreader for Rainbow Cargotec Industries China.

electrical engineer

  •  WORK ONLINE WITH CANADIAN TEAM IN KEENTECH ENTREPRISE AND PARTICIPATE IN SKYPE MEETINGS. 
  • Do electrical design for their industrial machines (welding and cutting machines). 
  • Work with the automation department in programming those machines. 
  • Budget Estimations

electrical engineer

  • Preparation of Joint measurement certificate. 
  • Client Billing. 
  • Contractor billing. 
  • Involved in preparation of material requisition & purchase requisition.

electrical engineer

  • Electrical Network Design
  • Building Services Design
  • Renewable Energy Projects
  • Sports Field Infrastructure Projects
  • Client liaison
  • Compliance with ISO 9001 system
  • Compile Tender Documents

electrical engineer

  • Handled total process control on PLC/SCADA programming in Wonderwares Intouch for SCADA, Siemens PLC (S7-300) with Siemens Win cc & Flexible SCADA.
  • Having an experience of commissioning work of BUSS QK-110 for XLPE HT and BUSS MX-125 for XLPE LT compounding machines with fully automation.
  •  Erection, Commissioning, Operation and preventive / breakdown maintenance of electrical equipments like HT / LT Transformers, Circuit Breakers, PCC/MCC, Motors, Battery sets.
  • Routine, preventive and breakdown maintenance of motors with different ratings, high current power rectifiers with transformers & OLTC, automatic voltage transformer, circuit breakers, capacitors bank, metering & protection of electrical equipments/machineries, EOT cranes, Hoists, VFD’s, DG Set.
  • Scheduling & planning of maintenance job with key focus on spares availability, root cause analysis, breakdown data collection and history data.
  • Installation of AC Drives, DC Drives.
  • Guide operators and workers to perform their duty.

electrical engineer

  • Performs preventive maintenance items as scheduled 
  • Installs, adjust, and repairs complex  electrical control circuit.
  • Able to read and understand electrical diagram
  • Perform periodical maintenance services
  • Lubricates required areas of the Heavy Equipment and check for wear and tear 
  • Carries out  inspections and provides quotations  for parts and labour required
  • Install, maintain, identify faults and repair electical wiring and computer based equipment  in vehicles and equipment

electrical engineer

  • Plan layout of electric power generating plants or distribution lines or stations.
  • Confer with engineers, customers, or others to discuss existing or potential engineering projects or products.
  • Erection work of 132 Kv tower and equipments at 132/33/11 Kv AISSubstation. 
  • Earth mat laying in switchyard. 
  • Electrical conduiting and wiring at Control room building. 
  • Civil foundation work of 132Kv and 33Kv towers and equipments. 
  • Preparation of Measurement Book and abstract. 

electrical engineer

  • Perform difficult staffing duties, including dealing with understaffing, refereeing disputes, firing employees, and administering disciplinary procedures.
  • Plan and conduct new employee orientation to foster positive attitude toward organizational objectives.
  • Plan, direct, supervise, and coordinate work activities of subordinates and staff relating to employment, compensation, labor relations, and employee relations.
  • Represent organization at personnel-related hearings and investigations.
  • Prepare or maintain employment records related to events such as hiring, termination, leaves, transfers, or promotions, using human resources management system software.
  • Prepare technical drawings, specifications of electrical systems, or topographical maps to ensure that installation and operations conform to standards and customer requirements.

electrical engineer

  • Direct or coordinate manufacturing, construction, installation, maintenance, support, documentation, or testing activities to ensure compliance with specifications, codes, or customer requirements.
  • Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards.
  • Assist in developing capital project programs for new equipment or major repairs.
  • Replace defective components or parts, using hand tools and precision instruments.
  • Assist scientists and engineers in conducting applied research in electrcal engineering.