electrical engineer Archives

Planning & execution of any modification work for ease of operation.
Controlling the MTTR & MTBF.
Attain Electrical & Mechanical Break down
Controlling on Power Generating System.

Designing of Electrical Circuit
Testing of Electric Motors, Panel wiring
Testing of the Electrical Equipment’s.
Process monitoring through SCADA by using OFC.
Job execution with quality, safety, and updating job History.
Proper reporting of Breakdown & Preventive Maintenances.
Root cause analysis of each breakdown & working out corrective, preventive Action.

Planning, Designing, Procurement, Erection and Commissioning of Electrical Equipment’s of Sub-Station 33 /11 KV Switchyard
Commissioning of 12 MVA OLTC Power transformer, RTCC Panel.
Commissioning of 11 KV / 415 V 2.0 MVA Transformers, LT MCC Panels.
Allen Bradley Power Flex 400 Drives for 250 TPD Paper Machine.
HT/LT switch gears (VCB’s, MOCB’s, PCC, MCC, LDB Etc.) UPS Up to 40KVA.
Responsible for electrical drawings, specifications, calculations, charts and graphs.
Categorizing customer requirements and designing the products as per the requirements.

Site Engineer in IBC13 project
Assisted in drafting of electrical layouts
Maintained man power’s through supervising site inspection
Accommodation A/C and refrigeration systems maintainance.

Responsible for planning and assigning work schedules of electricians ensuring each project meets the specified deadline.
Inspects work in progress to make sure that plans and specification are followed.
Inspects work in progress to make sure that plans and specifications are followed.
Provide site supervision during construction and start-up.

Acknowledged for implementation of Low current system
Initiated Implementation of Fire Alarm, Voice evacuation system
Initiated implementation Multimedia Network system such as Public Address, Access control, CCTV system, Hotel lock system, Fire fighter telephone system.
Initiated implementation of medium voltage, low voltage, Layout of cable routing installations

B.E (Electrical & Electronics) with 4.7 years of experience in Erection, Installation, Testing and Commissioning in the Power projects.
Working with ECOREN ENERY INDIA PVT LTD as Engineer – Project Execution in Wind power project from July 2014 to till date.
Skilled at managing Electrical Projects involving Erection, Testing & Commissioning of 220KV, 132KV and 33 KV Transmission lines, 33/220 KV Substation in wind power project as well as executing the project and ensuring on time deliverable s.
Hands-on-experience on pre-commissioning/commissioning activities.
Managing and monitoring the performance of team members to ensure efficiency in Project activities and meeting of individual and group goals.

Responsible for monitoring electrical activities (maintenanceand procurement) of 15 operational road projects acrossIndia, functioning from the regional office in Ahmedabad.
Review the data from Highway Maintenance Software andanalyse the performance of the Projects.
Visit Projects sites to ensure adherence to SOP.
Handled the EIP Work Order approvals, bill processing andrelated documentation work pertaining to the Head –Maintenance.
Initiated and supervised the replacement of conventionalstreet lights with LEDs for Power Saving up to 60% in 2 roadprojects (Vellore, Tamil Nadu and Panipat, Haryana)
Responsible for reviewing and recommending annual budgetapprovals for 3 road projects in Gujarat.

Conduct engineering site audits to collect structural, electrical and other related site information for use in the design of residential and commercial solar power systems
Design of PV systems for residential and commercial facilities
Create electrical single line diagrams, panel schedules or connection diagrams for solar electric system using CAD software
Create plans for solar energy system development, monitoring and

Plan and layout of 33kv switching station
Regular supervision of 33kv ongoing switching station
Electrical supervision and handling of 400meter tunnel
Conduct field surveys or study maps, graphs, diagrams for 132kv transmission line( currently working on field survey of 132kv transmission line}.
Estimating labor, material, for switching station work ,tunneling work
Prepare technical drawings, specifications of electrical systems, or topographical maps for 132kv transmission line

Plan layout of electric power generating plants or distribution lines and stations.
Design, implement, maintain, and improve electrical planning, equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Conduct and supervise the installation and operation of electrical equipment and systems.
Specify, coordinate, or conduct quality control and quality assurance
Conduct field surveys or study maps, graphs, diagrams, or other data to identify and correct power system problems. procedures.

Implemented regularly scheduled testing, maintenance, and preventative maintenance of electrical machines.
Developed, performed, and scheduled preventive maintenance..
Identifying & maintaining critical spare & updating records for spare parts.
Ensure installed electrical devices meet standards of National Electric Code.
Preventive & Breakdown maintenance of Motors, Switchgears, AC Drives and soft start, Lighting Systems, Hydraulic Valves, power factor, Calibration of control valve, Different types of Instruments like Flow Miters, sensors, Encoder, transmitter, limit switches, etc. Belt Conveyors, and continuous improvement activities.
Skilled in installation and repair of PLC S7 300 &400 & 200 &HMI &simatic s7-200 & micro and others.
Meticulous attention to detail with regard to safety regulations and practices.

Operation and preventive maintenance of DG set of 75 KVA, 125KVA, 180KVA (Of kirloskar, Cummins & Ashok Leyand make)
Operation and preventive maintenance of AC
Operation and maintenance of DG.
Operation of change over switches.
Operations and maintenance of all type of AC (split, duct able)
Ability to work in a team and get best from the team.
Hank dyeing machine, Paddle Dyeing & Tumbler dryer, Hydro, Hank & cone Winder.

Prepared daily power report and send to planing head,electrical head and engineering head.
make purchase requisition of spare parts through SAP and fallow up the material procurement process.
Responsible for shift activities and maximum power generation through 6.25 MW Power plant.
Train workers in safety procedures such as the use of fall protection devices, proper use of first aid kit, and fire fighting training.

Commissioning & Preventive Maintenance of Gas Generators Rated 380KVA
Make Cummins with its ACB Panels.
Commissioning of Synchronous Panel with Woodward Technology.
Commissioning of Chillers Make Kriloskar 75TR with VFD Drive.
Laying out all grounding and Earthing systems along with the proper Illumination.
system according to the SLD.Selection of Proper Schedules of cables and Designing for safe and protective.
operations according to Oil & Gas Regulations.

Perform preventive maintenance works of partial discharge test & tangent – delta test for 11 KV/6.6 KV/3.3 KV Motors and send to the vendor for analysis in ExxonMobil
Maintenance & troubleshooting perform preventive maintenance of generators and transformers.
Perform preventive maintenance works& Troubleshooting of heat-tracing panels and lighting panels and its associated circuits.
Follows-up and gives work direction to the electrical team.

Apply E&I permit and prepare Job Safety Analysis (JSA) and conduct a tool-box meeting.
Work closely with contractors for PTW and LOTO and Prepare Job safety analysis and Task Risk Assessment
prepare procedures for Preventive Maintenance Works in ExxonMobil
Maintenance Troubleshooting of Sub-station Breakers and Switch Gears,
Maintenance & Troubleshooting and perform preventive maintenance & Testing and Commissioning of HV/LV Motors and Motor Operated Valves and Variable Frequency Drives & MM2 &UPS& Fire & Gas alarm panel and its associated equipment’s. Plant lighting.
Attend shutdown projects and completed it within the target period. Supervise the planning of all Electrical / Instrument Maintenance activities, as per schedule
coordination with the Plant Manager to ensure smooth execution of MOC projects

Worked as site engineer in transmission and distribution division(upto220kv).
Worked as operation and maintenance engineer at 132kv Grid Sub-station.
Quality testing at grid substation as well as construction site.
Commissioning of electrical equipments
Assist contractors on jobs
Maintain records on electrical jobs and assign to appropriate personnel.

Planning, execution and supervision of assembly & erection activities of lattice steel towers (assembly, erection, bolt tightening, torqueing, shortage fixing etc.) as per SEC standards & specifications.
Planning, execution and supervision of stringing activities of ACAR/AAAC Conductor & OPGW (pulling, sagging, dead ending, spacer dampers installation etc.) as per SEC standards & specifications.
Management and coordination for installation of vibration dampers on OPGW and vibration recorders on conductors / OPGW as per manufacturer recommendations and SEC standards.
Management of manpower, sub-contractors, equipment, machinery and tools to get the maximum progress as per schedule.
Coordination with Sr. Managers and Project Consultants for on-going project status/issues/documentations.
Maintain accurate and up to date progress of activities of project and progress reporting to Sr. Managers/ Project Consultants & SEC management.
Management and coordination with third-party personnel’s for OPGW splicing and testing as per SEC standards.

Rendered technical drawings and electrical systems specifications exceeding company standards
Performed in-depth electrical acceptance testing of completed hardware, including continuity and high-potential isolation testing
Created electrical schematics using AutoCAD Electrical Toolset
Improved methods for measurement, documentation and work flow management

Experience in the installation of earthing and lightning protection systems for high rise buildings.
Installation of first fix materials in the slab to be followed up with a second fix and final fix for electrical systems.
Installation of raceways and cable trays and ladders in the building for routing of all types of cables.
Experience in installing and terminating life safety and security systems including Fire alarm, Voice EVAC, CCTV and Card Access systems.
Worked on data and telephone networks of the building including fiber optic and backbone network.
Working and operational knowledge of building lighting and power distribution systems.

Monitor and control maintenance costs
Deal with emergencies, unplanned problems and repairs
Improve health and safety policies and procedures
Work with special equipment, such as DCS and PLC, which control machinery on factory assembly lines

Investigate customer or public complaints, determine the nature and extent of the problem, and recommend remedial measures.
Develop budgets, estimating labour, material, and construction costs.
Arrange specialist procurement of fixtures, fittings or components
Control maintenance tools, stores and equipment(SAP PM)

Maintain electrical and instrumentation systems of Boiler and Turbine generator
Management of change (MoC)
Diagnose breakdown problems
Design maintenance strategies, procedures and methods
Carry out routine scheduled maintenance work and respond to equipment faults
Fit new parts and making sure equipment is working correctly
Carry out quality inspections on jobs

Review and submit the electrical drawings related to the projects to the consultants
Prepare BOQ list and handling of the materials for the project
Coordinate with main-contractor and vendor to fully furnish the installation
Supervise and Coordinate the electrical installation works on site
Liaise with different vendor for the finalising of the CCTV, ELV and PA system
Submission of documents for joint inspection with LEW for Electrical System
Preparation of the testing and commission of the electrical system ie. CCTV System, ELV System, EPS System etc.

Manufacturing of 11KV & 22KV Air Break Switch,D.O. Fuse.
L.T.D.B.(25KVA, 63KVA &100KVA), all test taking under ERDA.
Complete the projects within time, Testing of all test at the present of Customers.
Supervising of all staff, workers and store.

Assemble solar panels systems or support structures and install components, units, wiring, or assembly casings, using rivets, bolts.
Plan layout of electric power generating plants.
Coordinated installation and maintenance to ensure compliance with specifications
Supervised project team members as necessary.

Maintenance of Induction and synchronous generators.
Troubleshooting of electrical panels using SLD.
Scheme tracing on Protection Systems.
Operation & Maintenance of 11KV Switchyards, LT & HT Switchgears and LT & HT Motors.
Maintenance of Distribution Transformers.
Making Generation Reports, Plant Performance Reports and Load flow studies.

Analyzed ladder logic programs on STEP7 software and studied electrical schematics for fault troubleshooting of industrial electro-mechanical systems.
Learned to program PC-based PLC runtime on BECKHOFF embedded PCs using TWINCAT 2 PLC software.
Worked with a team on refurbishing an Alpine blown film extruder from the ground up.
Troubleshot electrical equipment problems such as electro-valves and sensors.

Oversaw and planned electrical specifications for new systems.
Created and implemented test plans.
Worked to create improvements that optimized production.
Accurately diagnosed and directed system issues.
Managed the diagnosis and repair of electrical circuits and wiring.