electrical engineer

  • All swithgear Equipment maintenance, servicing, testing, Commissioning.
  • Panel testing – HT, LT, PCC, MCC, PMCC, RMU, NGR,MLDB
  • CT & PT testing – Winding resistance measurement, Polarity, Primary injection, Knee point voltage, Ratio
  • Transformer testing – Insulation resistance measurement, Voltage ratio & tap continuity, Magnetic balance, Vector group, Measurement of inrush current, No load & full load, Differential protection scheme, REF protection scheme
  • Motor testing – CRM, No load & block rotor, Vibration
  • All types of relay testing – Secondary injection, Protection schemes
  • All types of circuit breaker testing – CRM, Timing of closing & tripping

electrical engineer

  • Interpreting the symbol details, dimensions, wire connection point as to apply on switchgear .
  • Understanding of the electrical devices and ordering catalogue number to create customize symbol as per the factory requirement.
  • Designing and drawing of electrical control panels, SLDs.
  • Prepare Bill of Materials (BOQ) for supply items as per Specification.
  • Technical discussion with consultant/Customer,getting drawing approval for manufacturing.

electrical engineer

  • Graduate apprentice trainee in electrical department.
  • Learned the basics of electrical engineering .
  • knowledge on power and distribution system , transformers , circuit breakers , instruments , motors , relays.
  • Projects handled:
  • installation of Air Handling unit (AHU).
  • Data collection and updating of electrical Motors, Starters,Variable frequency drives and test report for submission withPSPCL and Chief Electrical Inspector Govt. of Punjab.
  • Energy saving project : Replacement of street lights and plantlights with LED lights.

electrical engineer

  • Executed project scope items, anticipating project issues and developing appropriate solutions. 
  • Conducted site visits, inspections and electrical installation monitoring. 
  • Prepared proposals including scope of services, schedule, budget and documentation requirements.
  • Electrical Engineers team lead. 

electrical engineer

  •  To manage Enforcement & Metering activities and to look after AT & C losses and maintenance activities below 11KV. 
  • To discharge duties under CESU (Central Electricity Supply Utility) Supply code (Vigilance/Recovery/Disconnection). 
  • To check the accuracy of meter (1f, 3f & CT meter) by accu-check in suspected MT cases (meter tempering). 
  • To prepare various reports like load report, meter report, seizure memo & inspection report at raiding premise.
  •  To organize Mass raids with the help of police & local administration where direct hooking cases are maximum. 
  • To book electricity theft cases (DT, DAE & MISUSE) under section 126 & 135 of Indian electricity act.

electrical engineer

  • Updated service record files on equipment drawings and history.
  • Administered budget, tracked expenses and documented changes.
  • Assisted management with supervision of the store.
  • Supervising the Chij Katong Convent School,Pei Hwa Presbyterian School,Andreson Secondary School etc.,

electrical engineer

  • Computer analysis of underwater shock testing
  • Creating computer models relating to shock testing in the ocean
  • Research and development of sensors and testing equipment
  • Designing equipment for faster transmission of data
  • Project Management of underwater shock testing
  • Estimating budget and scheduling

electrical engineer

  • Planned, drafted, executed, maintained and improved electrical instruments, equipment, components and systems; controlled computer-aided engineering and designed equipment to perform engineering tasks. 
  • Follow up the maintenance & production process for the crushing plant including (Jaw, Cone crushers & VSI).
  • Prepare production reports and forward to the crusher manager.
  • Balanced power production, operating costs and safety concerns through continuous system regulation.

electrical engineer

  • Review the daily report and inventory the problems and work of the daily plan to solve them.
  • Supervision and follow-up with the operating team inside the control room to follow loads and feeders.
  • Supervision and follow-up with the maintenance team in preventive maintenance of the station (alternators, switch-gear, NGR, AVR……elct).
  • Preventive maintenance work for transformers and ring main unit (oil level, insulation…..elct)
  • Follow-up of the transmission Lines team (13.8 kV & 33kV) in the preventive maintenance of transmission lines ( insulator status, Re-tighten the wire,…elct)
  • Participate in new projects to identify transformers and new transmission lines (transformer capacity , voltage drop … elct).
  • Prepare specifications for purchases of materials or equipment

electrical engineer

  • Knowledge of electrical equipment application for power and control systems
  • Conducted investigation on electrical failures and resolved problems
  • Conduct troubleshooting by analysing its root cause and implement corrective action.
  • Continuously implement safety measurement on handling electronic equipment while completing the testing and troubleshooting tasks. 

electrical engineer

  • Prepared new tariff system for EEC (Eritrean Electricity Corporation).
  • Member for national standard committee for electrical equipment.
  • Installation and maintenance wind turbines .
  • Prepare and follow up national energy projects
  • Prepare project reports and other program or technical documentation. 
  • Give courses in house electrical installations for technicians.
  • Research with energy efficiency on wood stove.

electrical engineer

  • During this period he performed in the construction,Execution in the errection of turbine and generator sets,GLOPU,Governor systems,Operation,testing and maintanenace of
  • Performed different types of Test on HV/LV VCB closing and tripping timing, Control cabling in both HV/LV Switchgear panels,Testing of transformer oil,Insulation test,Earthing test,CT ,PT test and T.T.R testing  by using various kits. 
  • Maintain records of hydroelectric facility operations both preventive and predictivemaintenance or repairs. 
  • Performed in the construction and maintenance of 33KV transmission line. 
  • Develop or review budgets,annualplans,power rates, standing operating,procedures and monitor or inspect hydroelectric Equipments,like turbines,generatorand control systems. 
  • Performed in control operation of Machine startup and shutdown operation automatical(PLC) and manual operation for compliance with prescribed operating limits like loads,voltages, temperature, lines or equipment. 
  • Responded and taken sudden necessary action to equipmentrelated faults, hydroelectric power facilities, PLC programming related faults and Cleared all within a short span of time. 

electrical engineer

  • Specialist in Power transformer loading/unloading, Erection,  Commissioning, Overhauling, Testing and Hydro generator coil change, Product training, Customer/Production support, Documentation and Team management with Shree Abirami engineering works.
  • Extension experience in Inspection, Installation on Power Transformer, ESP & Distribution Transformer, Hydro Generator.
  • Strong knowledge on Power distribution and supply chain and maintenance using various electrical components.
  • Having exposure & experience in many power distribution sites all over India like BHEL, Tata, YTPS, KCPL, KSEB hydro power plant, NTPS Thermal plant, APGENCO Thermal and hydro plant, TNEB power distribution plant.

electrical engineer

  • Management of Electrical installation with contractors and subcontractors such as exothermal welding of copper wires for earthing purpose, fittings of insulators, stringing activity to established transmission line etc.
  • Co-ordinated with consultant and engineer for network design to monitor contractors regarding the construction progress in field.
  • Responsible for cost estimation, prepare and evaluation of Tender/ Bid documents.
  • Always assured in quality work performance, take extreme care with electrical safety.

electrical engineer

  • Gathering information to determine energy use, potential energy savings in complex commercial/ residential facilities
  • Preparing energy audit report
  • Preparing specifications for installation of energy conservation measures
  • Manage and trained all team members on construction site for daily work duties, responsibilities and safety to build a high skilled, performance focused, innovative, passionate team.

electrical engineer

  • Specification for electrical wiring accessories & components.
  • Lighting calculations.
  • Sizing transformer, capacitor bank, standby generator, rectifiers, batteries.
  • Cable sizing and selection.
  • Single line diagram
  • Voltage and short circuit calculation.
  • Consulting and comissing of residential and commerical building electrical works.

electrical engineer

  • Write software programs for microcontrollers or computers in a machine, assembly, or other languages.
  •  Coordinates operation and maintenance activities to ensure optimum utilization of power system facilities and meet customer demands for electrical energy. 
  • Compliance Testing of 30 MVA Power Transformer, Gas Insulated Switchgear, Remote Terminal Units for Control Testing. Involve in Factory Acceptance Test (FAT).
  • Preventative maintenance of battery bank and generator in Substations for electrical backup supply.Testing of Transformers (25/15 kV Single and three phase) for distribution line in Rural Electrification.

electrical engineer

  • Sub-Station Designing and Cable Scheduling
  •  Prepared bill of quantities for project
  • Prepared format for testing  
  •  Designs power system facilities and equipment and coordinates construction, operation, and maintenance of electric power generating, receiving, and distribution stations, transmission lines, and distribution systems and equipment: Designs and plans layout of generating plants, transmission and distribution lines, and receiving and distribution stations. 

electrical engineer

  • Being Team Leader of electrical engineer (employer), I direct, supervise, motivate and manage all team members (other engineers, supervisors, technician etc.)
  • Liaise with vendors and stakeholders and prepare tenders, quotations and proposals in engineering field site.
  • Established strong communication with Project co-ordinates, seniors, suppliers, government’s representatives and costumers. 
  • Direct and coordinate manufacturing, construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer 
  • Operate computer-assisted engineering or design software or equipment to perform engineering tasks.requirements.
  • Prepare and revision of single line diagrams (220 kV transmission line and Substation).
  • Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards.

electrical engineer

  • Worked on Al-Rajhi Bank Project (Data Center TIER 4) undertaken by Drake and Scull Constructions
  • Worked under Professional Engineer’s to assist with creation of utility system assessments for our clients to properly maintain and upgrade their facilities
  • Identified electrical equipment discrepancies/issues through field inspections
  • Assist with creating and installing warning labels on electrical equipment to ensure clients safety
  • Collaborated weekly with engineers to complete projects on time and to specification
  • Check and cross reference drawings and assist in producing as-build drawings for operations
  • Monitor installations and testing of various Electrical Equipment

electrical engineer(internship)

  •  Developing power line designs using Auto CAD software
  • Analyzing the pending and already finished drawings of various distribution lines of various parts of Uganda. 
  •   Determining the components and equipment’s required to construct new distribution lines. 
  •  Taking part in the bid hearing of new lines to be constructed.
  •     Continuous quality control of overhead project works.  
  •  Preparation of project documents like design reports, monthly reports, progress reports, work programs  etc. 
  • carryout  Load flow analysis  for different projects.

electrical engineer

  •  Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards.
  • Attend meetings on site
  • Design and conduct tests
  • Record, analyse and interpret test data

electrical engineer

  • Prepare monthly progress report and assess them against the project schedule..
  • Making Presentations to deal with clients.
  • Managing projects & providing the cost estimation and BOQs of undertaking projects of Electrical works.
  • Communicate with clients and contractors

electrical engineer

  • Project schedule planning, progress tracking & reporting
  • MV/LV Substation & electrical load distribution design for MEP
  • Material estimation, budget planning & Prepare BOQ
  • Supervise & guide electrical work on BNBC / NEC / ACCORD standard
  • PLC automation design & installation for BMS
  • End to end communication with client & consultant
  • Issue tracking, decision making & trouble shooting

electrical engineer

  • Plan layout of electric power generating plants or distribution lines or stations
  • Identify customer requirements
  • Design systems and products
  • Read design specifications and technical drawings
  • Research suitable solutions and estimate costs and timescales
  • Make models and prototypes of products using three-dimensional design software
  • Work to standards, including British (BS) and European (EN)

electrical engineer

  • Verify the specifications and accuracy of Electrical shop drawings, material submittal, method statements, etc.
  • Load distribution schedule for connected loads using SLDs and select the suitable cables, switchgears & containments.
  • Ensure all electrical work for LV systems is executed according to the specifications & approved drawings as per IEC regulations & comply the ISO standards.
  • Short circuit & voltage drop calculations.
  • Testing & commissioning of electrical systems.
  • Earthing and lightening protection system design.
  • Supervision and team lead at site for project completion under time.

electrical engineer (intern)

  • Learn how to plan layout of electric power generating plants or distribution lines or stations under supervision of Senior Engineer
  • Confer with engineers which involved with the company to discuss existing or potential engineering projects or products under supervision of Senior Engineers
  • Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. (Site visit to RTM Kuching and UNIMAS, Kota Samarahan)
  • Use computers for various applications, such as database management or word processing. -Key in data company’s projects  data into more systematic and structured form using Microsoft Words and Excel

electrical engineer

  • Working  as a Planning Electrical.
  • Doing works on:-
  • 1. System Application and Products in Data Processing.
  • 2. Microsoft Excel
  • 3. Microsoft Project.

electrical engineer

  •  Maintenance & Operations of 11kV – 440V HT/LT Panels, Switch yard, Transformers, DG Sets, DG Panels, Lighting Panels & Load Distribution in Plant Process. 
  • Execute Annual Testing & Calibration of Transformers, Protective Relays & Circuits Breakers. 
  • Preventive Maintenance of various Electrical utilities, i.e. Power Utilities, UPS Systems, Elevators, Air Compressors, Cooling Towers, Air Conditioning System, etc. as per schedule, checklist and maintain record. 
  • Regular monitoring & keep record of organization’s Electrical Load Consumption and ensure Power Factor to be maintained as per departmental objective at all the time & Energy saving in utilities. 
  • Ensure Man, Machine & Material Environment Safety And Plant  House Keeping Timely. 
  • Update and maintain ISO Documents.

electrical engineer

  • Having working knowledge about PLC, and Relay Logic etc. 
  • Working under knowledge of ISO9001, OHSAS18001.
  • Working with SAP CRM & SAP R3. 
  • Also able to handle Splicing machine, Power meter or various OFC related modules.