electrical engineer

  •  Supervision and Execution of Erection and testing and commissioning
  • supervise and Execution  of 11kv substations and generators and transformers 
  • Testing, repairing of Breakers and switch gears and panel boards Installation at substations and fire alarm and gas alarm devices 
  • Supervision and execution of testing of transformers and generators and relays and electrical motors earth pits and single-phase and three-phase energy meters and tri vector meters’ 
  • Supervision of maintenance and troubleshooting for electrical AC/DC Motors and transformers and generators and substations equipment
  • Supervision of building services. 
  • Follow tender and prepare a quotation and submit for work order and Testing of transformers oils and do class A and class B checking of generators and transformer yards and earth pits. 

electrical engineer

  • Design Analog DC-DC Converters and Linear Regulators as per requirement
  • Perform Control Loop Stability Analysis for DC-DC Converters
  • Develop Electrical Symbols and Schematics in Cadence OrCAD and Mentor Graphics xDx Designer 
  • Experienced in performing Simulation, Derating, Power Delivery Network and Worst Case Circuit Analysis using MathCAD
  • Prepare Hardware-Software Interface Specification document 
  • Assist in Value Addition and Value Engineering (VAVE) Activities 
  • Coordinate with PCB Layout and Mechanical team for Component placement

electrical engineer

  • Assigned as Coordinator between SMCC Japan Head Office and SMCC Philippines for electrical systems
  • Check technical drawings by JICA’s consultant
  • Evaluate proposals of subcontractors to ensure conformity with standards and client requirements
  • Assisting SMCC Japan in designing electrical system of temporary facilities

electrical engineer

  • Preparation/ modification of detailed layout for new substation installation using AutoCAD.
  • Preparation of site daily reports, inspection requests, estimates and all applicable monitoring reports on regular basis or as  required.
  • Preparation of all project related design, engineering documents (material submittal, functional design specification).
  • Preparation and modification of shop drawing as per site condition and scope of work (PO & BOQ).
  • Preparation of technical drawings, specifications of electrical systems, and topographical maps to ensure that installation and operations conform to standards and customer requirements.
  • Preparation of cost comparison sheet for all suppliers & Sub-contractors offer.
  • Provide technical solution/ engineering support for design and site related works.

electrical engineer

  • Worked as Assistant Engineer / Assistant Executive Engineer / Executive Engineer for 19 years in various electrical Sub – Divisions and having vast experience( in distribution ) for construction of HT , LT lines , 33/11 kV sub stations and reduction of Transmission and Distribution losses.
  • Worked as Senior Executive and Additional Senior Executive in Transmission wing.
  • Having vast experience for construction of EHV sub stations ( such as 132/66 kV , 220/132 kV ) and EHT lines ( 66kV , 132 kV and 220 kV ).
  • Presently working as Superintending Engineer / Deputy Chief Engineer in operation circle for last 5 years.

electrical engineer

  • YTPS is  1600 MW Thermal power plant
  • Posted in coal handling plant (CHP).
  • Maintance of HV and LV motors, switch gears.
  • Resposible for LV power, lighting, lightning protection, fire alaram, public address, data/voice withing (CHP). 

electrical engineer

  • 20MW Solar power plant management and co ordinate with contactors and vendor negotiation
  • Maintenace ,supervision,troubleshooting ,breakdown,& making record of all operation maintenance activitiesof the site
  •  Maintenance of20MVA Power& 4*5MVA inverter transformers.
  •  Operation and maintenance of all elctrical equipments
  •  Maintenance of SF6 ,indoor/outdoor VCB circuit breaker.
  •  Maintenance of 110v batteryCharger& Battery Bank & 5*3kva UPS 
  • Detailed study of 66/33KV switch yard

electrical engineer

  • Drawing Analysis
  • Assign work to labours and sub employees
  • Electrical wiring, conduit pipes laying and routing
  • Laying and termination of HT, LT cables
  • Installation of Lighting arrangements
  • Installation of single, three phase sockets
  • Erection of Distribution Box, Local push button station,Lighting Distribution Board, Power Distribution Board

electrical engineer

  • Travel and conduct site visits (relevant to electrical field) to offices and premises of project implementing partners (both governmental and non-governmental organizations) in order to inspect observe and verify ongoing project activities.
  • Collect quantitative and qualitative data and monitor the progress of the project activities and quality of implementation against project work plans using appropriate monitoring measures.
  • Examine and verify the stated activity input output and impact indicators to assess the progress of projects’ activities.
  • Prepare consolidate and submit post-mission reports in the form of checklists and narrative reports and other weekly monthly and project completion reports to his/her supervisor.

electrical engineer

  • Low current systems installation, maintenance and troubleshooting
  • Conduct regular inspections and assess the work performance done by all Subcontractors •
  • Attend Meetings with clients to solve technical issues and other related matters •
  • Coordinate the handing over of completed works to client and completion of the necessary rectification works.
  • Supervision for technicians and workers on site.
  • Solve technical troubleshooting of projects on site.
  • Make daily site reports.

electrical engineer

  • Prepared materials and equipment for assigned jobs daily, Completed all assignments for both residential and commercial applications
  • Supervise workers and manage/train local electricians and mechanics on proper wiring principals and safety procedures.
  • Adapt or design computer hardware or software for manufacturing uses.
  • Develop models or computer simulations of systems to obtain data for measuring processes.

electrical engineer

  • Inspect, and test completed units to ensure that units meet specifications, and tolerances.
  • Study sample parts, blueprints, drawings, or engineering information to determine methods or sequences of operations needed.
  • Coordinate activities of engineering or technical personnel involved in designing, fabricating, modifying, or testing TV products.
  • Evaluate product data and design from inspections.
  • Write technical reports and specification, for use by manufacturing members for SONY TV plants worldwide.
  • Install, adjust, maintain, repair, or provide technical support for jigmodules.
  • Develop new applications for for data checking uses.

electrical engineer

  • Develop strategies that will be effective on bringing the project into success
  • Create electrical plan and plumbing layout of the proposed building 
  • Coordinate with clients with regards to concerns that arises during construction
  • Make detailed cost estimate of the project

electrical engineer

  • Implement control for electrical spare parts management system 
  • Prepare report and perform liaison work within the company and external agencies in implementing electrical regulatory requirements of the government 
  • Maintain strong coordination with production department concerning mattes that would affect production schedule and product quality 
  • Perform other task as may be assigned to Technical Service Manager

electrical engineer

  •  Support in writing new business proposals 
  • Provide technical support to the other Department of the achievement of goals through continuous supply of utilities, plant cleanliness and safe working environment 
  • Coordinate with team of staff and contractors for the executions of projects 
  • Plan and implement measures for facility improvement to achieve an effective and safe working environment 

electrical engineer

  • Perform Preventive Maintenance for machines and Equipments as per Schedule.
  • Diagnose problem related to Electrical and Instruments.
  • Make sure all machines are running smoothly without any malfunctioning
  • Maintain knowledge of all product and service offerings of the company 

electrical engineer

  • Exposed in the operation of BMS ( Building Management System ), SCADA ( Supervisory Control and Data Acquisition ) RTO HMI ( Regenerative Thermal Oxidizer ) 
  • Trouble shooting and Maintenance of Printing Machine, Slitting Machine, Laser Perforation and Electro Perforation Machine, Hot Foil Stamping Machine, Rewinding Machine; Operation of AHU’s, Chiller and Cooling Tower and Air Compressor Unit, 
  • Overall in charge in the Operation and Maintenance of high voltage switchgear (34.5 KV), low voltage switchgear, Motor Controls, Power Transformer ( 2-units 1250 KVA) standby Diesel generator set ( 3- units 500 KVA, and & 1- unit 250 KVA) Synchronizing Panel and ATS, Fire Detection and Alarm System and FDAS, CO2 and N2 suppression system 
  • Design and Implement Electrical Maintenance Program to optimize performance of facility, production and transport equipment 
  • Ensure information and reporting system for electrical system activities are accurate, current and effective 
  • Monitor and check the accuracy, applicability and compliance of the established SOP’s of the Department 
  • Assist the Technical Service Manager in Implementation of Budget Control 

electrical engineer

  • Responsible for tender, sales & marketing activities for products and services as allocated by GM (Sales & Marketing).
  • Responsible for sales and marketing of High Voltage and Medium Voltage projects including Transformer related products and services.
  • Responsible for managing project and supporting senior project engineer in managing complex projects.
  • Account manager for key customers as allocated by GM (Sales & Marketing).
  • Responsible for managing projects and ensure its profitability.

electrical engineer

  • Street Light Installation and Maintenance Work with EESL & JMC.
  • 66 KV Sub Station Operation and Maintenance Work.
  • ISO Documentation work.  
  • Perform scheduled preventive maintenance tasks, such as checking, cleaning, or repairing equipment, to detect and prevent problems.  
  • 66 KV S/S Shut Down Maintenance work – Complete Electrical Testing with CM/PM Job. 

electrical engineer

  • Planning, analysis and designing of underground external electrification of housing schemes/villages and commercial malls/markets along with BOQ’s.
  • Calculation of load requirements as per MEPCO’s prevailing policies.
  • Computation of voltage drops and power loss at various points of purposed existing network to keep the voltage drops and power loss within the accepted limits. 
  • Estimation of cost as per MEPCO price schedules.
  • Submission of the detailed design package to MEPCO as per their requirement for approval.
  • Attend meetings and coordinate with MEPCO and clients.
  • Supervision during the execution of projects.

electrical engineer

  • Preventive Maintenance of power & distribution transformers: – Includes Ratio check, Magnetic balance Check, Vector group check, Winding resistance and simulation check from switchyard to panel of all the protection instruments installed on transformer like WTI, OTI , PRV and BUCCHOLZ RELAY etc.
  • Preventive maintenance of ABB make VCB VD4 Circuit breakers.
  • Conditioning monitoring of ALL Transformers, UPS, Motors Battery chargers & UPS.
  • Testing of breaker Siemens Make 3WL/3WT LT which Includes Insulation Resistance (IR) & Contact Resistance Measurement (CRM), Timing Test.
  • Maintenance of LT motors and Controlling of motor through DOL, STAR-DELTA, VFDs, Control wiring system of circuit breakers.
  • Predictive, preventive, breakdown maintenance jobs for all electrical equipment as per schedule & priority basis.
  • Troubleshoots plant electrical problems to determine their cause and recommends options for eliminating such problems.

electrical engineer

  • Performing a wide range of engineering tasks by operating computer-assisted AutoCAD desgning.
  • Writing reports and compiling data regarding existing and potential electrical engineering projects and studies
  • Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings.
  • MEP designing and consultancy.

electrical engineer

  • Negotiate with clients to prepare project specifications.
  • Direct the installation, testing, operation, maintenance, or Inspection of Diesel Generator Set.
  • Review production schedules,Technical specifications, orders, and related information to obtain knowledge of manufacturing methods, procedures, and activities.
  • Handling whole Purchase of Electrical goods.
  • Also work as Wire Man in Electrical Panels more than 3 Months.

electrical engineer (internship)

  • Involved in developing and installing electrical components mainly enclosures. 
  • Prepared installation manual with installation drawing for each type of newly designed enclosures. 
  • Assisted an Electrical Engineer on quality check of enclosures. 
  • Updated WMS with the details and images of a component and worked with the Warehouse Manager to organise the warehouse equipment with barcode. 

electrical engineer

  • Splicing of wires 
  • Inspection of wiring installation processes
  • In- charge of inventory of materials and equipment in warehouse 
  • Mainly electronic boards and PCBs maintenance, in addition to working on boards schematics. .

electrical engineer

  • Design, implement and maintain protocols to ensure safe and reliable operation of electrical instruments and equipment.
  • Fault finding, analyzing and solving.
  • Planning, supervising, and organizing the fabrication, installation and testing works at Construction site.
  • Worked in LV and Control Systems design, including programming of PLC/SCADA (TIA PORTAL v7.1 SIMENS) systems.

electrical engineer

  • Electrical Substation Operation and Maintenance. 
  • Annual Maintenance and Testing of VCB, ACB, SF6 Circuit Breaker and CT, PT.
  • Maintenance of Oil and Dry type transformer’s.
  • Transformer Oil BDV test.
  • Maintenance of PCC , MCC, MLDB and APFC panel.
  • Earthpit testing.
  • Battery charger and Battery set Maintenance and charge discharge test.

electrical engineer

  • Reviewing the technical aspect with of Project with Construction Manager and submit to Project Manager for final approval.
  • Field study for complete investigation for preliminary data collection.
  • Liaise with Construction Manager in Different aspects of Project activities such as commissioning of Electrical/Mechanical Generator using dry test method.
  • Perform electrical engineering duties concerned with design, implementation, maintenance and improvement of electrical instruments for transmission and distribution purpose.
  • Follow up the design drawing according to the contract documents.
  • Prepare the checklist of all the electrical embedded parts and re-check them with the lab report to verify the conformity.
  • Inspect the site work of Civil Construction and release it to Hydro/Electro mechanical division for continuity. 

electrical engineer

  • Inspection of Power Transformers up to 500 MVA,765 kV Class Including 270 MVA Single Phase Generating Transformers.
  • Erection,Testing & Commissioning of Power Transformers Up to 500 MVA,765 kV class.
  • Certification for Training of Power Transformers of 765 kV class from Toshiba -JAPAN
  • Erection,Testing & Commissioning of Scott-Traction Transformers
  • Preparation of Commercial components of services

electrical engineer

  • Service, repair, overhaul, inspect and identify faults on NOV Rig Equipment on a global basis.
  • Make recommendations on improving product and system efficiency, maintaining continuous operation and high level of operation.
  • Report and update relevant documentation including daily reports, survey reports, part lists and service reports.
  • Promote HSE plans and support the continuous developing of internal policy and adhere to HSE requirements whilst working on both onshore/offshore installations.
  • Trouble Shooting the electrical problems on overhaul of NOV Rig Equipment and during the testing.
  • expose to a wide range of VFD and PLC systems such as (ABB, Siemens and Omron).
  • Advise customers on the maintenance and upkeep of their NOV equipment as per the various manuals, product information bulletins (PIB) drawing revision changes, software updates.