design engineer Archives

Understanding and evaluating customer needs and elaborate viable solutions
Prepare a high-level design and concept that meet the customer’s expectations
Consolidating and organizing the technical solution into technical proposals
Leading the technical activities for new product development & Work with external engineering partners in mechanical design
Handled sensitive projects fully complying with information security regulations
Support manufacturing if needed for improvement projects after products are released

Draws floor plan on AutoCAD environment as specified by the engineer or as requested by the client.
Visualizes the plan through free-hand drawing according to the given specifications by the engineer or the client.
Approximates the quantity of materials needed for a specific project.
Prepares the necessary bidding cost as to be approved by the manager.
Coordinates with the client regarding the project’s current status and bid progress report.
Supervise workers on site occasionally or upon the command of the manager.

To provide blueprints, technical drawings, schematics, or computer-generated reports for Production and Design using CATIA.
Research, design, evaluate, install, operate, and maintain mechanical products, equipment, maintaining customer Needs and solving engineering problems.
Responsible for Design and fabrication of sheet metal Guarding equipment for CNC machines.
Successfully completed projects with Samsung India, Timken and other OEMs for new Machine designs.

Obtain and assemble data to complete HVAC designs, visiting job sites to compile measurements as necessary.
Recommend design modifications to eliminate Wastage of production time and Material
To Read and interpret HVAC drawings, elevation view.
To make Numbering Drawing as per specifications to determine component parts and assembly sequences of Ducts.
Inspect completed work to certify that Production meets standards and that completed Ducts units to ensure that to meet specifications, and customer order requirements .

Design and development of products for extrusion and injection mould manufacturing.
Works in 2D, 3D Solid works and NX.
Coordination with clients for design approval.
Coordination With CNC operator for making mould and dies.
Attending trial of mould.

Floorplanning for the top level block for both revisions along with the sub-blocks floorplanning
Placement and Routing–Blocklevel Placement and Routing. Having floorplan area of 2.2mmsq and stdcell area 0.9mmsq. Highest clock frequency used in the block is 1.5Ghz .Having gate count of 0.81 million
Congestion analysis and pin placement analysis at intermediate stages to implement the necessary floorplan changes was done.
Running sign-off EM/IR analysis on the top level by merging all the blocks. And debugging and solving the issue that comes up. Analyzing various plots such as resistance plot, tap current plot etc.
Worked on the DRC and LVS of the digital blocks along with noise violation and antenna fixes.
Calibre scripts to check the Electric rule checks(ERC) and some floorplan level checks were developed.

Superior proficiency with CATIA V5 Design suite
Vast experience with automotive parts designing mechanisms
Excellent knowledge of GD&T (Geometric Dimensioning and Tolerancing)
Thorough familiarity with PDM systems and automotive chassis
Strong problem solving skills
Good independent worker with occasional direction

Analyze user needs and software requirements to determine the
Order or maintain an inventory of telecommunications equipment for customer premises equipment (CPE), facilities, access networks, or backbone networks.feasibility of design within time and cost constraints.
Drew out measuring procedures of various parts of non-standard production
Conducted internal production line audits and quality inspection

Concept designer for the project MERCEDES BENZ
Conducted meetings with experts and allign the customer time line with internal time line
Prepare & maintain ISO documents for internal as well as external audits.
Analyzed control processes and check advice documentation

Research and Design new products.
Modification in existing design.
Electronics for the products, IOT, AI, etc.
Troubleshooting the 3D printers.
Prototyping with 3D printing.
Documentation and Rendering the final products.
Make presentation for product launching.

Developed of Basic Vehicle Tracking Device in 8bit Micro controller
Integration of RFID, Finger Print Module, Taxi Meter, Fuel Sensor for Vehicle Tracking Device.
Development of advanced vehicle tracking device in multi core processor
Implementation of Route Announcement system with Tracking Device, involves in adding GPS, GSM, LED scrolling Screen, Voice Announcement.
Designed and Develop GUI in C++ to load vehicle route in run time
Government Certification Process – ETDC certification as per JSS-55555 standards

Filament Winding Machine for Ordinance Factory.
Inmould Labeling Machine for Agasthya Polyplasts Pvt Ltd.
Antena Positioner for National Aerospace Laboratories, Banglore.
Fresh Food Wending machine(Live Pasta Maker) for Enjoineers, Sweden.
Smoothie Machine(Instant Juice Maker) for Enjoineers, Sweden.

Electrical Design Engineer for Project Saans: First in world, multi-powered CPAP Device used to maintain constant residual air pressure in neonatal lungs to prevent alveoli collapse.
Responsible for debugging, verification and validation for Project VAPCare: AI based secretions and oral hygiene management device to prevent Ventilator Associated Pneumonia (VAP).
Recommended design modifications to eliminate system malfunctions.
Played additional role as Quality Assurance Engineer for QMS Documentation for Coéo Labs Pvt. Ltd.

Apply continuous improvement methods such as lean manufacturing to enhance manufacturing capability.
Train new recruits and team members on skills including software testing, ladder editing and manufacturing equipment maintenance.
Write software programs for microcontroller based PLC’s using a ladder editor compliant with IEC-61131-3 standards.
Design software for manufacturing equipment of Programmable Logic Controllers, Thermistor Protection Relays, Rate indicators and Counters.
Prepare documentation for manufacturing process and quality standards.

reviewed PFD, P&ID, front end engineering, detailedengineering documents and provide technical supportduring construction and commissioning activities.
Developed Valve Material Specifications, Piping Specificationand also percipitated in ECO( Engineering Change Order)
Developed Valve Scheduling (VSH) for multiple projectsincluding foreign projects.
High level technical solutions to operations challenges andevaluate the expertise of existing and new suppliers.
Defined the scope for hardware modifications and participate in vendor selection.

Responsible for technical authoring of Vendor Service Bulletin (VSB) for Airbus A350XWB Galleys
Liable for investigation of issue/s to be resolved through Vendor Service Bulletin (VSB) by reviewing documents including but not limited to: Leighton Buzzard Investigation Report (LBIR), Joint Change Request (JCR), Design Query Note (DQN), Non-Conformance Report (NCR), Engineering Change Notice (ECN), Equipment Design Evolution Sheet (EDES), and Electronic Work Instruction (EWI)
Coordinates with other departments mainly but not limited to the Production Line, and Final Assembly Line (FAL) to ensure that Vendor Service Bulletin (VSB) is correct and in line with process specification
Provide support in checking of Vendor Service Bulletin (VSB) to ensure the document complies with S1000D and M2995 Airbus Manual

Preparation/Design of General arrangement drawing of 11/220kV and 220/6.6kV substations as per CBIP guideline.
Preparation/Design of Single Line Diagram.
Preparation/Design of protection scheme as well as SLD for switchyard equipment like transformer, CB, ISO-ES etc. for c&r panels.
Preparation/Design of Cable Trench layout also EKD diagram.
Preparation/Design of Earthing layout and design specification document as per IEEE 80 and IS 3043.
Design of Lightning Protection layout and and calculation document as per IEEE 998.
Prepare cable sizing document and cable schedule of Lv and control cables as well as cable interconnection schedule.

Created layout designs for Printed Circuit Board (PCB) using Zuken CR-5000 Board Designer
Created component and pattern layout, checking of customer instructions, company standards, and additional specifications from the customer
Solid understanding of layout techniques for good signal integrity, digital/analog designs and on multi-layer boards, flexi boards and build-up boards
Modifying/upgrading existing details in equipment, plant layouts etc for enhancing the productivity and quality.

Created and implemented a solid modeling template that reduced lead time by 50 percent.
Implemented new sample and production tool designs to customer specifications and tooling standards using solid works.
Upgraded and maintained tool design standards for the tooling division and customer specifications.
Oversaw the tooling build and maintenance, making critical decisions and recommendation through out the product life cycle

Assist drafters in developing the structural design of products using drafting tools or computer-assisted design (CAD) or drafting equipment and software..
Coordinate with other engineers, management, and the creative department .
Making manufacturing drawing including various welding details enabling clarity for production department.
Preparation of BOM with brief specification

Knowledge of piping layout and design standards, working knowledge of ASME, ASTM, ANSI & EJMA Design codes.
Analyzing project specifications given by customer and designing the products to meet as per the customer requirement.
Material selection based on the application and type of standard used.
Calculating the material cost and fabrication cost.
Preparation of Quality Assurance Plan, Testing Procedures & Process Documents for Customer Approval.
Analyzing the design data provided for drawing.
Diagnose for any problems encountered while drafting of plans as well as preparing suggestions for avoiding repetition in future

Design of telecommunication tower.
Design of foundation of telecommunication towers and Monopole
Sight surveying
Supervise the manufacturing process of all designs.

Research and draft blueprints, engineering plans, and graphics.
Develop test prototypes.
Identify solutions to improve production efficiency.
Use design software to develop models and drawings of new products.
Maintain existing engineering records and designs.
Assess all engineering prototypes to determine issues or risks.
Estimate cost limits and budgets for new designs.

CAD software CATIA V5 Knowledge of- Complete seat / Foam / Plastic Good communication skills- written and verbal Knowledge of regulatory requirements for seats, prototyping & testing Knowledge of PLM / PDM Preferably Agile and team center Knowledge of GD&T.
Understanding drawing standards CATIA V5 Part design, DMU, Drawing or Job Responsibilities.
Design & develop seating system, Design verification and coordination with the development team in Novi Offshore, FORD.
Customer interaction to review engineering feasibility, manufacturing feasibility packaging study & designing parts in CATIA V5.

Development and maintenance of design documentation for international projects;
Development and design of 3D models of automation units;
Strength and load calculations;
Development of test programs to confirm the specified reliability of products;
Translation of design documentation;
Coordination of work with international partners.

Review of contract specification.
Preparation of Speed Vs Torque Curves.
Calculate the Fan size by using selection curve & Master graph..
Calculate the Fan running power.
Prepare the Fan foundation load detail for each pocket.
Operation problem referred will be analyzed and remedial action will be implemented.
Calculation of Fan critical speed.

Worked on more than 15+ external Engineering projects from Automotive and Tooling industry.
Developed Assembly Jigs and Fixtures as per Customer Approved Drawings.
Preparing 3D models and drafting it to 2D with preparation of Bill of Materials for a given assembly.
Review the engineering/ design changes & resolving quality related problems associated with design. Responsible for Customer Interactions understanding the Customer Requirements for Design

Detailed design engineering for coal based power plant. Design includes sizing of electrical equipments like switchgears, transformers, cables, battery and charger, earthing and lightning protection.
Preparation of single line diagram, equipment layout, cable routing layout, lightning protection layout, cable scheduling, interconnection scheduling, control cable scheduling etc.
Bid evaluations, vendor drawings / document review.
Familiar with national and international codes (IEC & IEEE), ETAP, DiaLUX software.

Prepare schematic design, layout, calculations, technical reports and specifications, etc (MDB,MCC)
Produces complete controls solutions and electrical design packages based on customer specification, and standardized design practices.
Formulates and produces complete electrical design package such as detailed schematics, cable routing diagrams, panel layouts, bills of materials, and purchase of material.
Document control, project monitoring and drafting of electrical diagram
Assist in the manufacturing and commissioning stage to provide solution for any technical or functional problems

Use computer software to generate new images.
Experienced in preparation of spring datasheets, snubber datasheets, struts datasheets and rod hanger datasheets.
Experienced in carrying out thermal displacement calculations by complying to ASME B 31.3 process piping code.
Experienced in visual clearance of non-critical piping systems.

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

junior design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer(detail engineering)

design engineer

design engineer

design engineer

design engineer

sr. design engineer/team leader

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer

design engineer