• Prepare design for rubber coupling s-type.
• Prepare solid model & 2D drafting for MS HUB in which rubber coupling mounted.
• Prepare mold design for various rubber coupling & anti-vibration rubber mounting.
• Develop mechanical design using SolidWorks.
• Collaborate with internal managers and contractors to plan and schedule equipment modifications around manufacturing needs.
• Read and interpret technical drawings, schematics, or computer-generated reports. 

• Eicher Buses
• Olectra BYD electric Bus
• Worked in Matlab and simulink in deriving mathematical model of the suspension systems
• Data visualisation in Python

• Execution and Management of various projects involving design and development of Piston Compressors
• Creation of Product Performance portfolio documents
• Handling Division level projects 
• Design validation and analysis of core components of piston compressors

•  2 years of experience in Design and Development of Jigs and Fixtures, Press Tools, Moulds, SPM using UG NX and CATIA.
• Conceptualisation and Design solution. 
• Technical drawing and documentation.
• 3D CAD Modelling, Detail and Assembly drawing in UG NX.
• Solving problems on shop floor by working closely with production people. 
• Familiar with statistical tolerance stack up analysis.
• Proficiency with ASME Y 14.5 Standards.

• I have done projects pressure vessel and heat exchanger And storage tanks equipment’s in oil and gas industry. 
• I have done mechanical strength Manual calculations as per ASME Standard, section -VIII, Div1.  of shell, nozzle thickness & structural column support & fasteners for pressure vessel, heat exchanger and storage tanks. and 2d and 3d Modelling drawing with the help of Auto CAD and inventor tool. 
• I have done FEA analysis of static (Bending,shear & von-mises) and dynamic (lateral critical speed & modal analysis)stresses for pressure vessel & supporting structures by using Ansys tool.
• Identify opportunities to improve products or reduce costs using knowledge of fabrication processes , tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.

• The project involved 3D modeling, detailing and assembly of components of POWER GENERATION UNIT using ProE Wildfire-4.
• Extract the DATA (Extracting the IGES data into Pro E data) Generate of new numbers for new parts, assembly and drawing from PLM.
• Make CAD model, assembly, drawing & detailing of the parts provided. Assemble of components with the help of skeleton creation& Top down approach.
• Assemble all part of the engine, exhaust after treatment unit.
• Check proper clearance with other parts as per design standards.
• Check the model, assembly and drawing as per the set standards.
• Put the final DATA in PLM (MATRIX) and PDM (WINDCHILL).

• Working as a Design Engineer in CAD Engineering services related to automotive parts and industrial products.
• Work for Product Design, Sheet Metal Parts and Assembly Design.
• Managing all Outsourcing projects related Design and Developments in Mechanical.
• Modelling of 3d Printing Parts and Reverse Engineering Parts.
• Working as a faculty for giving Professional Training to Engineering Students and Industry employee in Designing Software like Auto CAD, PTC Creo Parametric 3.0, Solid works. 

• Hands-on experience with QGIS open-source cross-platform desktop geographic information system application that supports viewing, editing, and analysis of geospatial data. 
• Had Been involved with teams like:Telangana Fiber Grid (T-Fiber) which is envisioned to establish a state-of-the-art network infrastructure to facilitate the realization of ‘Digital Telangana’ objective by piggybacking on Drinking Water Project – Mission Bhagiratha.T- Fiber provides Infrastructure for affordable and high speed broadband connectivity and Digital services to “10 Zones (33Districts), 589 Mandals, 12,751 Gram Panchayats, 10,128 villages, 83.58 lakh households and more than 3.5 Cr people”Government to deliver Government to Citizen (G2C) and Government to Government (G2G) services – by providing high speed broadband connectivity to government offices, educational institutions, hospitals, banks and other public service institutions
• Bandwidth Provision and/or infrastructure to various operators on non-discriminatory and non-monopolistic manner without entering into competition
• Piggybacking on Mission Bhagiratha project (provides drinking water to rural Telangana) to save digging and trenching costs.

• Lead or coordinate engineering and technical personnel in  designing, fabricating, modifying, or testing of naval radar systems.
• Formulate conceptual design of naval radar systems to meet customer requirements.
• Evaluate and approve selection of vendors by studying past performance or marketing materials.
• Perform administrative functions, such as reviewing or writing reports, approving expenditures, or purchasing of materials or services.
• Introduction of new 3D prtinting technologies in the production life-cycle.

• Provide mechanical design and development new products for automotive equipment and industrial tools industry.
• Develop and recommend changes if any for manufacturing processes.
• Reduce product cost and improve design performance working with other groups on value engineering initiatives.
• Resolve problems and improve manufacturability and serviceability of products working with manufacturing and service personnel.
• Prepare engineering drawings.
• Record production details of small and large projects.

• Design and Development of Testchip architectures for silicon qualification of Memories and STD cells.
• Bottom up synthesis of Test chip blocks and scan insertion.
• Timing constraints and STA.
• Functional, back annotated and spice simulations.
• Development of testbenches for validations of designed Testchip architecture.
• Exposure to RTL checks, handoff checks.

• Responsible for Product design, 3D Modelling, 2D Drafting, Photo realistic rendering, etc.
• Designed Kiosks for retail players, Designed scientific measuring instruments and smart furnitures.
• Worked on 20+ different projects.
• Worked on Patenting process.
• Hands on experience with Ultimaker 2+
• Traveled to manufacturing facilities to evaluate product creation and point out potential issues.
• Developed concept layout and design of pneumatic separator (Provisional patent pending) from product specifications using 3D CAD software.

• Working in New Product Development for developing the components of Injection Moulding Machines
• Having experience in designing fabrication structures for IMM’s
• Having 
• working
• introducing

• In-charge for overseeing all Mechanical and Electrical works.
• Prepare plans, designs, calculations in accordance with established standards and specifications.
• Prepare drawings of structures, systems manually or with computer aided tools (CAD, MEP, etc.) while maintaining quality, content and drafting standards.
• Carry out routine technical surveys and make suggestions to modify drawings.
• Coordinate with other project personnel to ensure that deadlines, procedures, and other project requirements are met.
• Liaise with local authorities for the approval of MEP services drawings and service connection.

• 3D Modelling and detailing of steel structures and sheet metal products in heavy equipment of mining (Thickeners and filters). Selection of material and sizing based on client requirement. Issuing drawing to workshop and abroad clients.
• Developing 2D Drawing & 3D Components for HBF (Horizontal belt width filter) & for HRT (High rate Thickener) & also steel structures, sheet metal, tubing & piping and preparing fabrication drawings for sub Assembly Drawings using AutoCAD & Autodesk Inventor.
• Drafting of Schematic Drawings, General Arrangement and Sub Assembly Drawings of HBF & Thickener.
• Generating Bill of material for the fabricators, Part list, Master list for drawings, Erection drawings, and transmittal for drawing release, & tagging documents for equipment’s.

•  Auto desk inventor use as a major modelling tool and also sometimes use Auto CAD ,Factory Inventor and Plant 3D for modelling. 
• I have worked in wide areas right from Consumer products, Heavy Machinery Equipment’s, Automotive Spares, pressure vessel, Industrial Equipment’s etc. 
• I have worked with Heavy Castings, Structural, piping, piping support I have worked with many complex Assy’s and BOM creation, Revisions, ECR/ECN. 
•  I have worked on motion works for assembly animations. 
•  I have worked with generating the manufacturing drawings and assembly line drawings. 
• I have worked on i-assemblies, i-logic’s (this helps in multi configurations). 

• Study of system voltage levels and system loss. Sectionalizing, power factor correction. 
• Technical loss study, feasibility of inclusion of new areas / consumers etc. Inventory management and preparation of work plan. 
• Integration & Renovation staking sheets & Material lists etc. 
• Assist line manager to facilitate line manager’s duties and responsibilities. Follow-up with concern departments to improve system performance 

• Preparation of technical drawings as per the customers’s specification using softwares such as AutoCad,Creo and Catia.
• Coordinating APQP projects and handling PPAP documents based on the customer requirements. 
• Customer interaction for technical decisions.
• Preparation of Control plan, Fmea, SOP, and process flow diagram.
• Handling all the APQP projects and follow-up  of all the processes.
• Conducting Cross functional team (CFT) meetings.

• Responsible for making Drawing and releases of front, Rear Suspension and Long member of frame
• Responsible for making Vehicle specification input sheet 
• Actively participation Benchmarking vehicles to finalize vehicle specification
• Review drawings for accuracy, conformance to project requirements, manufacturability and established company practices and procedures.

• Preparing material BOM, Control Plan, APQP & PPAP documents. 
• Digitizing & making pattern required for seat cover part trims.
• Analyze project requests, proposals, or engineering data to determine feasibility, productibility, cost, or production time of seat covers we manufacture.
• Supervise technicians & junior engineers.

• Drafting of various Automated parking Products using AutoCAD,
• Assist in Development of new product in Solid works.
• Assist in developing the structural design of products using drafting tools or computer-assisted design (CAD) or drafting equipment and software. 
• Preparation of Bill of materials for various projects assigned. 
• Integral Member of standardisation team for some key parking Systems of the firm. 

• Design and Development of High Voltage Connectors, Charge Couplers and Service Plugs for Electric Vehicles.
• 2D and 3D Drawing using SOLIDWORKS
• Design verification using SOLIDWORKS SIMULATION
• Performing Design Study to counter potential product failure
• Participation in creating FTA and DFMEA

• Preparing sheet metal and weldment parts using SOLIDWORKS and conversion to .dxf.
• Developing nesting files for CAM
• Product visualization using keyshot
• Designed mechanical equipments.
• Estimate costs and prepare BOQ/QUOTATION of sheet metal parts.

• Analysing the customer requirement and finding the feasibility of the product & developing Necessary Fixture’s.
• Creating 3‐D modelling by using surface modelling & sheet metal, 2D drafting the models according to the Fabrication needs  Precision Drafting using GD&T symbols), DXF of the product and estimating cost of the product.
• Conduct design reviews, perform feasibility analysis and contribute to continuous improvement by developing new work processes and procedures.
• Prepare cost summary sheets and techinical assessments for Multi Itches, Hydrolics graples, Manual graples, Timber grabs, Selector grabs and various types of Buckets.
• Provide suggestions for suitable process for Line products to increase productivity and Quality.
• Preparation of presentation drawings, Process drawings, Job work and BotOut Items.
• Incorporate all customer requirements into process drawings, not limiting to Critical to Quality and Key characteristics.

•  Design engineers study, research and develop ideas for new products and the systems used to make them. They also modify existing products or processes to increase efficiency or improve performance.
• Responsible for the research and design of a company’s new products and systems. They perform various tasks in an engineering department including drafting blueprints, creating test prototypes, and overseeing the manufacturing process. 
• Usually works with a team of engineers and other designers to develop conceptual and detailed designs that ensure a product actually functions, performs and is fit for its purpose. 
• Client and Utility staff Liasion.

• Conduct jobsite observations, field inspections to collect data for the purpose of creating distribution designs for certification by the energy authorities.
• Detailed structural and electrical calculations required for successful certification of both overhead and undergrounds designs up to 66kV.
• Environmental Impact Assessments.
• Earthing Field observations and detailed calculations.
• Line route selection and associated surveying.
• Management of Invoicing and Payments as required.
• Project scheduling.

• Handled the managerial duties within the design engineering department and coordinate with the other departments 
• Designed sound proof canopies for electric generators of sizes ranging between 9kVA and 500 kVA
• Designed insulated rooms
• Priced tenders according to clients’ specifications
• Issued BOQs of final products

• Conducting researches, using various models to work out new developments and innovations and prove them to be cost–effective.
• Designing the research ideas into technical plans using various software like CAD/ CAE.
• Implementing those designs and testing the final outcome.
• In case of any faults, reworking on the designs and implementing them.
• Testing and re-testing the designs for the perfect and flawless outcome.
• Creating reports and presentation on a regular basis for project managers and clients.
• Responsible for taking environmental issues into consideration as well as their manufacturing processes.

• Verified custom constraint environments on Linux. 
• Ran RTL on XILINX Vivado. 
• Debugged PCB boards on hardware. 
• Designed and verified schematics on ORCAD. 
• Worked on a third Generation Software Defined Radio (SDR).
• Worked on a Next Generation Signal Processing Reciever.

• MBIST verification for clusters like DDRPHY, CODEC, CONNECTIVITY etc with Synopsys SMS (STAR Memory System) flow.
• Memory Repair with fault-injection using Synopsys Test and Repair Flow.
• Generation of IEEE1500 compliant SHS (STAR Hierarchical System) wrappers for various AMS IP’s.
• SHS Verification of various IP’s like PVT sensor, PLL, OTP in standalone mode as well as at cluster level.
• Synopsys SHS and SMS based Pattern Development using Silicon debugg (yield accelerator).
• Integration and Test Implementation of Analog IP’s like SAR and SD ADC into SoC.
• Zero-delay and SDF back annotated timing simulations.