Professional Summary

Experienced general maintenance worker adept in the areas of maintenance, repair, and operations of large facilities including school buildings, churches, and homes for families. Proven ability to work on multiple projects simultaneously while adhering to the set schedule and budget. Extensive experience in carpentry, painting, construction, plumbing, and installations.

Employment history

Construction, Torp and Sons. Goodwinland, Missouri

Aug. 2018 – Present

Remove excess mortar with trowels and hand tools, and finish mortar joints with jointing tools, for a sealed, uniform appearance.
Break or cut bricks, tiles, or blocks to size, using trowel edge, hammer, or power saw.
Calculate angles and courses and determine vertical and horizontal alignment of courses.
Mix specified amounts of sand, clay, dirt, or mortar powder with water to form refractory mixtures.
Clean working surface to remove scale, dust, soot, or chips of brick and mortar, using broom, wire brush, or scraper.
Apply and smooth mortar or other mixture over work surface.
Issue violation notices and stop-work orders, conferring with owners, violators, and authorities to explain regulations and recommend rectifications.
Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
Follow established safety rules and regulations and maintain a safe and clean environment.
Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter’s hand tools, or power tools.
Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.
Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.
Perform minor plumbing, welding, or concrete mixing work.
Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut, mold, or shape woodstock or wood substitutes.
Align and straighten tile using levels, squares and straightedges.
Lay and set mosaic tiles to create decorative wall, mural and floor designs.
Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.
Remove and replace cracked or damaged tile.
Apply a sealer to make grout stain- and water-resistant.
Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.

Cashier/Cook, King Group. East Judieview, North Dakota

Feb. 2020 – Present

Answer questions about product features and benefits.
Order or purchase supplies.
Stock carts or stands.
Issue receipts, refunds, credits, or change due to customers.
Receive payment by cash, check, credit cards, vouchers, or automatic debits.
Assist customers by providing information and resolving their complaints.
Count money in cash drawers at the beginning of shifts to ensure that amounts are correct and that there is adequate change.
Establish or identify prices of goods, services or admission, and tabulate bills using calculators, cash registers, or optical price scanners.
Greet customers entering establishments.
Answer customers’ questions, and provide information on procedures or policies.
Sell tickets and other items to customers.
Process merchandise returns and exchanges.
Maintain clean and orderly checkout areas and complete other general cleaning duties, such as mopping floors and emptying trash cans.
Stock shelves, and mark prices on shelves and items.
Explain products or services and prices, and answer questions from customers.
Answer telephone calls from potential customers who have been solicited through advertisements.

Education

Northern Dickens, South Zacharymouth, North Carolina

Bachelor of Arts, Present

Western Cruickshank, Lake Markusfort, Wyoming

High School Diploma, Oct. 2015

Skills

Decision Making

Communication

Leadership

Foreign Languages

Teamwork

Ability to Work Under Pressure

Professional Summary

Outgoing, attentive student with some background experience in restaurants and interactions with people. My family has a deep background in event planning, and restaurant management, which has enhanced my abilities in the industries and given me a background as well. I have had several jobs that include hard labour duties, and long hours. I have also participated in many co- circular activities, fundraisers, and sports. This position would perfectly fit my skill set in social interactions, restaurant management, and business. Benefiting both employer and employee.

Employment history

Construction, Hagenes, Wilkinson and Heller. Seanbury, Wisconsin

Jul. 2018 – Aug. 2018

Cover surfaces with dropcloths or masking tape and paper to protect surfaces during painting.

Apply paint, stain, varnish, enamel, or other finishes to equipment, buildings, bridges, or other structures, using brushes
Read work orders or receive instructions from supervisors or homeowners to determine work requirements.
Erect scaffolding or swing gates, or set up ladders, to work above ground level.
Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
Mix and match colors of paint, stain, or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
Polish final coats to specified finishes.
Ten hour work days, Monday through Friday

Bailey Horse Company, Kilback Group. South Clemmieside, New Jersey

Feb. 2018 – Apr. 2018

Assigned tasks such as feeding and treatment of animals, and cleaning and maintenance of animal quarters.
Maintained and cleaned horse stalls
worked weekend for five to six hours

Rancher, Toy, Treutel and Murphy. South Lashawn, Maryland

Jun. 2017 – Jul. 2017

activities such as irrigation, harvesting, transporting crops and hay for livestock/ranch needs
Inspect farm or ranch structures, such as buildings, fences, or roads, ordering repair or maintenance activities, as needed.
Doctored Livestock such as cows and horses to ensure health
worked eight hour days, Monday through Saturday

Education

Eastern Hilll, Tonishaview, South Dakota

High School Diploma, Present

Skills

Fundraiser Manegment

Skillful

Social Interaction

Experienced

multi-tasking

Skillful

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

I have learned from my previous jobs how to be timely and efficient. I’m an exceptionally fast learner and eager to learn more. As well as able to follow directions and take on new challenges. Such as marketing when there was a problem i had to come up with new, and creative ways to solve the problem. As well as while i was a landscaper i had to respect and cater to the clients to keep their business.

Employment history

Apr. 2018 – May. 2018
East Wilburnfurt, Wyoming

Construction, Pfannerstill-Rippin

Working on construction taught me how to manage my time efficiently. Because i only had a certain amount of time to get a project done i had to manage my time perfectly to keep on target of where i want to be on the project and when.

Apr. 2018 – May. 2018
West Milton, Rhode Island

Marketer, Herzog-Padberg

As a marketer i had to formulate, direct and coordinate marketing activities and policies to promote products and services, working with advertising.

Aug. 2017 – Sep. 2017
West Lynwoodtown, Minnesota

Landscaper, Harvey and Sons

As a landscaper i learned how to cater to the clients needs and expectations. As well as i learned to work fast and efficiently, which was vital to keep the clients happy.

Education

The Massachusetts Academy – Starkstad, Mississippi

Skills

Time Management

Skillful

Working Efficiently

Skillful

Working Fast

Experienced

Being Polite to Clients

Expert

Being Adaptive

Experienced

Making Sure Everything is Done Right

Experienced

Hard Working

Expert

Attention to Detail

Experienced

Professional Summary

im a skilled carpenter with experience working on residential, and infrastructure construction projects. Expertise in planning carpentry construction projects, defining scopes of work, and managing material. Accomplished in contributing to the development of safety initiatives to improve occupational safety goals and mitigate safety hazards. Seeking to take next career step in construction management with a respected person
offering opportunities for advancement and personal growth.

Employment history

construction, Ledner, Ritchie and Hilll. West Brandonmouth, Texas

Jun. 2013 – Jul. 2013

Built, installed, and repaired structures and fixtures such as windows, doors, cabinets, furniture, and shelving for single and multi-family residential buildings.
Work with foreman to define key success factors for carpentry crew such as resource planning, safety requirements, and performance optimization strategies.

Move and transport materials and equipment to worksite, and setup sites to optimize construction workflows.
Generate and maintain accurate construction records and prepare routine status reports.
Devise and implement safety management initiatives to maintain accident-free workplace.

package handler, Powlowski, Sporer and Yost. Lake Tarraview, New Mexico

Feb. 2013 – Apr. 2013

Sort materials, such as metals, glass, wood, paper or plastics, into appropriate containers for recycling.
Work with personnel and facilities management staff to install, remove, or relocate user connectivity equipment and devices.
Determine size and arrangement of illustrative material and copy, and select style and size of type.

Education

The Wisconsin University, Lucianaberg, South Carolina

GED, constuction, Mar. 2016

Languages

spanish

Skills

contractor

maintence

carpenter

Professional Summary

Recent graduate equipped with a Bachelor of Science in Civil Engineering with a concentration in Transportation Systems eager to join a reputable organization to begin a fulfilling, lifelong career. Extensive knowledge of transportation planning and design, structural analysis, geotechnical engineering, multimodal transport, and sustainable transportation. Additional knowledge of urban and regional planning; expert in the implementation and use of Geographic Information Systems (GIS). great in the construction field

Employment history

sales associate, Fahey-Funk. South Veronaton, Montana

Dec. 2017 – Present

i do everything, i am not selected to just one job. i run the cash register, stock items, put feed on the floor. anything they ask me to do i do it

Demonstrate or explain products, methods, or services to persuade customers to purchase products or use services.
Keep areas neat while working and return items to correct locations following demonstrations.
Learn about competitors’ products or consumers’ interests or concerns to answer questions or provide more complete information.
Arrange properties, furniture, merchandise, backdrops, or other accessories, as shown in prepared sketches.

construction, Nolan, Lebsack and Roberts. Kuphalstad, Virginia

Aug. 2017 – Sep. 2017

Clean or prepare construction sites to eliminate possible hazards.
Control traffic passing near, in, or around work zones.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.
Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
Mix, pour, or spread concrete, using portable cement mixers.
Lubricate, clean, or repair machinery, equipment, or tools.
Operate jackhammers or drills to break up concrete or pavement.

Education

Western Ohio Institute, Jessikaville, Ohio

bachelors, civil engineering, Present

Skills

construction

retail

dedicated

Andrew Smith

Phone:

(000) 000-0000

Email:

andrew_smith@example.com

Address:

287 Custer Street, Hopewell, PA 00000

Professional Summary

Experienced general maintenance worker adept in the areas of maintenance, repair, and operations of large facilities including food and beverage , oil field, and home repair. Proven ability to work on multiple projects simultaneously while adhering to the set schedule and budget. Experience in carpentry, painting, construction, plumbing, and installations.

Employment history

Feb. 2018 – Mar. 2018
Hoppemouth, Arkansas

Construction/Property Maintenance, Douglas-Haag

Performed various on-site job duties
- Drywall- Removed defect drywall and replaced with new drywall using screws to fasten to studs, used drywall tape and mud to cover the seams of drywall boards. Used a variety of hand tools to perform job tasks.
- Paint- Prepped and painted inside and outside surfaces. Taped off any surfaces to prevent other color of paint from combining with the other. Scraped any old material that may be damaged to ensure good bond for primer and paint.
- Electrical-Commercial and Residential electrical duties which included replacing outlets, switches, sensor switches for lighting, plate covers, fuses, installing wiring to various circuits for correct voltage loads which included 120, 240, 480. Mounted and installed electrical boxes. Used tubing bender for conduit runs. Used variety of hand tools which included; drills, various screwdrivers, hot stick to check for hot circuits, voltage meters to measure amps and volts going through the circuit and to see if getting correct supplied power to electrical equipment.
- Tile-Removed existing tile setting down chalk line to make sure lines are even and replaced new tile adhering it with mortar and using tile spacers, grout and seal tile after mortar has set.
- Roofing- Removed and replaced roofing with new shingles or rolled roofing
- Lawn-care- Used mowers, weed trimmers and other various hand tools to mow the lawn, trim bushes and other plants and go around perimeter of homes getting tall grasses and weeds. Removed cuttings and cleaned up after job was finished.

Oct. 2015 – Jan. 2016
North Louie, Arkansas

Long Haul Team Truck Driver, Tillman, Metz and Hodkiewicz

As on Long Haul Team Driver it was my responsibility to ensure the safe return for my co-driver as well as myself.
Receive delivery packets with trailer number for hook up
Pretrips and post trips
Load and secure track used to hand unload products being delivered to warehouses
Communication with co-driver and fellow employees of road conditions
Used Electronic Log books and GPS to plan route

Mar. 2015 – Apr. 2015
Faheybury, Vermont

Solids Control Consultant, Leuschke, Osinski and Heaney

Observe work and monitor gauges, dials, and other indicators to ensure that operators conform to production or processing standards.
Performed basic maintenance on equipment; Centerfuges CD500, CD518, Summit and Razors, Verta-G, basic de-watering auger systems. Most set-ups were closed loop but we still had containment pits on the oil rig
Had to maintain a safe work environment
Worked to maintain a No-Spill work environment
Kept a good line of communication between the solids control team and the rig supervisors
Daily paperwork at end of shift for any maintenance done on equipment, then emailed to field supervisors.

Feb. 2012 – Apr. 2013
Port Cruzland, Wisconsin

Driver Sales Representative, Lemke and Sons

Performed pre trip and post trip
I was responsible for visually checking the freight in my trailer for damages or pieces missing then report to supervisor before leaving on delivery route
Kept constant communication with management on deliveries
Ensured to get a signature from customer for accuracy of piece count and non-damaged goods.
Used forklifts to unload and load trailers after arrival back to home terminal
EOBR coach of the on-board drive-cams

Oct. 2009 – Dec. 2009
Theronchester, Tennessee

Delivery Driver, Keeling Group

Inspect and maintain vehicle supplies and equipment, such as gas, oil, water, tires, lights, or brakes, to ensure that vehicles are in proper working condition.
Attended company safety meetings to go over stocking procedures and proper safety equipment to use
Supervised a team of stockers to ensure the product wasn’t damaged and also put into the right unit
Filled out delivery orders and had customers sign paperwork for accuracy of piece count and any damaged returns.
Equipment used to unload bathtubs from trailers were forklifts and handcarts

Dec. 2003 – Oct. 2005
Kamside, Arizona

Maintenance Mechanic/Line Greaser, Stracke, Hand and Harris

Oiled and greased bearings and gear boxes with food grade lubricants
Made adjustments needed for operation on packing and bottling equipment
Checked conveyor belts to ensure none were ripped or torn, Would make a report of damages made then would proceed to repair following LOTO process
Fabricated railings and other safety equipment to protect machinery from impact done by negligent forklift drivers
Replaced any damaged walls and racks
Checked filler machines for any damaged parts
Checked labeling machine for proper ink dispersement

Education

Dec. 1998

High School Diploma: General

Schumm University – Abbottbury, Hawaii

Skills

Forklift driver

Experienced

Mechanical maintenance

Skillful

property maintenance

Skillful

Professional Summary

im a skilled carpenter with experience working on residential, and infrastructure construction projects. Expertise in planning carpentry construction projects, defining scopes of work, and managing material. Accomplished in contributing to the development of safety initiatives to improve occupational safety goals and mitigate safety hazards. Seeking to take next career step in construction management with a respected person
offering opportunities for advancement and personal growth.

Employment history

construction, Howe Group. North Arvilla, Hawaii

Jun. 2013 – Jul. 2013

Built, installed, and repaired structures and fixtures such as windows, doors, cabinets, furniture, and shelving for single and multi-family residential buildings.
Work with foreman to define key success factors for carpentry crew such as resource planning, safety requirements, and performance optimization strategies.

Move and transport materials and equipment to worksite, and setup sites to optimize construction workflows.
Generate and maintain accurate construction records and prepare routine status reports.
Devise and implement safety management initiatives to maintain accident-free workplace.

package handler, Funk, Stracke and MacGyver. East Pilarbury, Michigan

Mar. 2013 – Apr. 2013

Sort materials, such as metals, glass, wood, paper or plastics, into appropriate containers for recycling.
Work with personnel and facilities management staff to install, remove, or relocate user connectivity equipment and devices.
Determine size and arrangement of illustrative material and copy, and select style and size of type.

Education

Jast College, Lowestad, Washington

GED, constuction, Apr. 2016

Languages

spanish

Skills

contractor

maintence

carpenter

Making the foundation by hand-mixing concrete
Leveling the ground
Constructing the frame of the house
Setting and tarring the roof
Layering the outside with stucco

During the past months or years, I have been working with a construction company.
Organized tools and equipment that the construction workers will need for the day.
Worked with the cleanup crew to clean the messes that were left over the jobs.
Help lift shingles onto the roofs of houses and also much other equipment.
Remove litter and debris from roadways, including debris from rock and mudslides.
Clean and clear debris from culverts, catch basins, drop inlets, ditches, and other drainages
Remove snow, water, or debris from roofs prior to applying roofing materials. structures.

Pool Construction and Repair
Led a team of individuals with a diverse background
Applied math skills to double check pool schematics
Worked long hours in intense heat
Lifted heavy objects that were a minimum of 50 lbs

Help clean up on jobs
Help set up at jobs
Load truck before leaving shop
Carried heavy equipment and items such as tile, brick, rock and other labor work.

Cleaning, and organizing tools and job sites, helping when it needed.
Grabbing tools and equipment when needed.
Learned new things about machinery, how to use etc.
Also learned more about how to frame houses.

Fasten glass panes into wood sashes or frames with clips, points, or moldings, adding weather seals or putty around pane edges to seal joints
Operate cranes or hoists with suction cups to lift large, heavy pieces of glass
Apply caulk, sealants and other agents to installed surfaces
Consistently assume additional responsibilities and work extended hours to meet project deadlines
Set ladders, scaffolds and hoists in place for taking supplies to roofs
Operate equipment such as SkyJack and Swing Stages

remodeling apartments/homes
repair drywall, patching, taping, and painting
install new doors and windows
light electical
repair water heater, toilets, faucets, sinks
carpentry, decks, patio covers, and framing

Built, installed, and repaired structures and fixtures such as windows, doors, cabinets, furniture, and shelving for single and multi-family residential buildings.
Work with foreman to define key success factors for carpentry crew such as resource planning, safety requirements, and performance optimization strategies.
Move and transport materials and equipment to worksite, and setup sites to optimize construction workflows.
Generate and maintain accurate construction records and prepare routine status reports.
Devise and implement safety management initiatives to maintain accident-free workplace.

Rebuild Apartments.
paint.
flooring.
fixing roofs , walls , etc .
cutting back yards grass.

Clean working surface to remove dust, soot, sawdust or chips of brick and mortar, using a broom, vacuum, or scraper to ensure a clean working environment for the next day.
Fill cracks or other defects in plaster or plasterboard.
Cut or saw boards, timbers, or plywood to required size, using handsaw or power saw.
Transport/move by hand or vehicle – tile, wood or other tools necessary for the job

Built and erected storage facilities across the US
Replaced or repaired roof commercially and residential
Repaired role up doors commercially
Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.Shape or cut materials to specified measurements, using hand tools, machines, or power saws.

Understanding and knowledge of using tools (hand tools, electrical tools, etc.)
assisting more experienced personnel
painting (bedrooms, bathrooms, kitchens, etc.)
patience and multitasking

Follow established safety rules and regulations to maintain a safe environment
Measuring and cutting lines on timber, using a pencil
Laying the timber on the floor
Lifting heavy materials and equipment form the trailer
Keeping the area clean by sweeping and disposing of rubbish
Removing hazardous materials
Observing as my employer operates the machine

Inspect bridges, dams, highways, buildings, wiring, plumbing, electrical circuits, sewers, heating systems, or foundations during and after construction for structural quality, general safety, or conformance to specifications.
Inspect and monitor construction sites to ensure adherence to safety
fixture installations
sheetrock

Remove and install flooringflooringflooring
Remove or repair drywalling
Cement mixing
Brick and mortar work
Construction site cleanup

Basic tool training
OASHA 10 Certification
NCCER Certification
MC3 Certification

Do drywall to cover the seams between drywall panels.
Measure, cut, and drill by using tape measures, handsaws, power saws, knives, screw-guns
Remove old insulation such as asbestos, while following safety procedures.
Assemble and fasten materials to make frameworks, using hand tools and wood screws, nails.

caulking
All types of flooring (carpet, hardwood, vinyl, floating, etc.)
All types of ceilings (Pop corn, conventional, suspended, etc.)
Dry wall
Material Installation
Almost everything except block work

Install Structures to renovate houses.
Paint new furniture.
Clean up renovation area
Fix any broken structures.
install new structural support.

Performed basic machine setup
Loaded and unloaded building or houses materials
Used hand Tools
Provide outstanding customer service
Followed standards and procedures to maintain safe work
Positive relationship with customers

Performed various on-site job dutiesDrywall- Removed defect drywall and replaced with new drywall using screws to fasten to studs, used drywall tape and mud to cover the seams of drywall boards. Used a variety of hand tools to perform job tasks.
Paint- Prepped and painted inside and outside surfaces. Taped off any surfaces to prevent other color of paint from combining with the other. Scraped any old material that may be damaged to ensure good bond for primer and paint.
Electrical-Commercial and Residential electrical duties which included replacing outlets, switches, sensor switches for lighting, plate covers, fuses, installing wiring to various circuits for correct voltage loads which included 120, 240, 480. Mounted and installed electrical boxes. Used tubing bender for conduit runs. Used variety of hand tools which included; drills, various screwdrivers, hot stick to check for hot circuits, voltage meters to measure amps and volts going through the circuit and to see if getting correct supplied power to electrical equipment.
Tile-Removed existing tile setting down chalk line to make sure lines are even and replaced new tile adhering it with mortar and using tile spacers, grout and seal tile after mortar has set.
Roofing- Removed and replaced roofing with new shingles or rolled roofing
Lawn-care- Used mowers, weed trimmers and other various hand tools to mow the lawn, trim bushes and other plants and go around perimeter of homes getting tall grasses and weeds. Removed cuttings and cleaned up after job was finished.

Lay and align bricks, blocks, or tiles to build or repair structures or high-temperature equipment, such as cupola, kilns, ovens, or furnaces.
Calculate angles and courses and determine the vertical and horizontal alignment of courses.
Clean working surface to remove scale, dust, soot, or chips of brick and mortar, using the broom, wire brush, or scraper.
Apply and smooth mortar or other mixture over the work surface.

scrap pick up and recycling.
material sorting and moving.
loading and unloading equipment.
getting people the tools required for the job.

02edfb11-e57e-4889-9f91-fc484af0d88e

Andrew Smith

Professional Summary

Employment history

Education

Skills

7e4a9679-0c34-4e29-bdd0-f0a2d8a5455a

Andrew Smith

Professional Summary

Employment history

Education

Skills

00fa8eb6-564a-4182-864f-120d98bb3cdd

Andrew Smith

Professional Summary

Employment history

Education

Skills

73e37651-b026-44ff-ab35-5c000a34722c

Andrew Smith

Professional Summary

Employment history

Education

Languages

Skills

aa88d93f-2147-48ea-9764-d42650daf518

Andrew Smith

Professional Summary

Employment history

Education

Skills

1fddcee7-8043-4ee8-9295-a626eb2294b0

Andrew Smith

Professional Summary

Employment history

Education

Skills

0e4ce666-5abe-455c-a66d-d9e3874a1706

Andrew Smith

Professional Summary

Employment history

Education

Languages

Skills

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction

construction/property maintenance

construction

construction