Create a Professional Resume Quickly with Our Resume Builder
- Run new electrical cables.
- Installing plumbing in RVs
- Be at work 7am sharp until 3:30pm or later for overtime.
- Build 250-350 engines per day.
- Build individual components that are later installed to an engine.
- Keep track of steps completed for each component, in the build process.
- Maintain a clean and safe work area
- Assist peers with their build process
- Assembled newspapers – Count, sort, assemble, and bag newspapers for delivery.
- Double-checking count of newspapers to be sure Delivery driver has all customer’s’ papers before heading out.
- Organizing each different zip codes, to ensure customers’ receive correct sales ads.
- Form corrections to route sheet for the driver, based on cancels, vacation packs, and restarts.
- Bag and loading newspapers into vehicles.
- worked in assembly as a line worker
- quality check parts brought to bay 3
- assembled the parts
- packed out, labeled and sent parts to safe launch
- Assembling and preparing salads according to Chopt standards
- Interacting with our customers to ensure every salad is made with personalized attention
- Learning recipe builds, dressing flavor profiles, and salad pairings to make appropriate recommendations to the customers
- Adhering to all steps of service so that our customer’s needs are met with each transaction
- Assemble parts together using a machine.
- Put in computer the amounts of parts I put together and collect stickers.
- Measure new parts to see that they are the right size.
- Complete all paperwork for the parts, bins, and work station.
- Communicate with personnel if there are any issues with the machine or any other issues.
- Sweep work station and wipe work space and machine off.
- Using heavy machines we had to lift drums full of toxic material that was highly flammable and spontaneously combustible
- Had to hand pour specific weights of chemicals of all different colors and viscosities into their proper containers
- Assemble every order with specific caps (capping machines) tubes, bottle, vials or syringes, and proper drum lifts or pale lifts
- Proper PPE was required while dealing with such toxic materials, cleaning up and setting up every station had to be done safely and precisely
- placed glass panels onto assembly line
- Disassemble broken cell strings on glass panels for replacement
- re solder new cells to existing cell strings
- layed eva sheets on panels
- replaced eva rolls when rolls ran out of material
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and machine.
- Connect the wiring, according to the specifications.
- Examine the work pieces for defects and grade the exact parts to ensure compliance with the specifications.
- Job responsibilites were assembly of heating and cols sensors.
- File, lap, and buff parts to fit, using hand and power tools. Measure, cut and thread pipe to specifications.
- Prepare or review specifications or orders for the purchase of the company’s plastic are parts, ensuring that proper features are present and that items conform to health and safety standards.
- Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into plastic car parts.
- Triple check all work that was built before double bagging all parts and sending them to the dock audit for the parts final check before being shipped to the customer.
- Operate Forklift to transport door slabs to prepare for next mornings shift.
- Operate Trim Machine, Header Machine along with Door Machine
- Measure and mark cut downs and replacement slabs before timming to requested specifications by customer.
- Cleaning of equipment and shop in preperation for next day.
- Build the front,end of cars
- Inspecting car parts
- Assemble
- High low driving
- Setup, operate or tend welding machines that join or bond components to fabricate metal products or assembly
- Help assist other workers in regards to machine and opening holding devices
- Correct problems by adjusting controls or by stopping machines and/or opening holding devices
- Read blueprints, work orders and/or production schedules to determine product or job instructions and/or specifications
- Assemble merchandise for display and sale.
- Inspect and prepare components for final assembly
- Sub-assemble and assemble compressors to specifications
- Document assembly process
- Assemble small aircraft parts adhering blueprint and instruction. Comply with due dates.
- In charge of expediting work orders by reviewing all shortages and ensuring product arrival
- Learn new computer systems and actively use Excel
- Communicate with planners and enginneers to solve work order problems
- Run daily morning meetings discussing work order shortages. Comply with due dates.
- Retrieve parts from stockroom for production area in order to expedite process
- Assemble Framing in preparation for shippment of doors.
- Operate Header Machine, Trim Machine and Door Machine
- Forklift certified
- Drives Forklift moving door slabs to shop from warehouse in preparation for next day.
- Operates Hand dollie
- Wear safety equipment such as hard hats, safety goggles, earplugs and steel toe boots.
- Use hand tools or machines to assemble parts
- Conduct quality control checks
- Assembly requiring a range of knowledge and skills
- Operate small and large cranes to transport or position large parts.
- Assembled building materials and components for house frame trusses.
- Cleaned and finished sub-assemblies or assemblies using hand or power tools.
- Formed assemblies and sub-assemblies using rivet gun and drill.
- Changing machine coils using crane.
- Inserted and positioned materials and clamped, fitted parts using hand and power tools
- Maintain clean work area by removing refuse and debris and organized all tools after completion of each shift.
- Rotating through multiple stations on a shift to ensure maximum alertness and preparation
- Analyzed blueprints and verify parts required prior to assembly
- Double-check connections to ensure they match and record any discrepancies in assembly log
- Inform supervisors of any part or equipment defects to ensure prompt response to the problem
- Communicate with other stations on the assembly line to ensure maximum speed and accuracy
- Maintain and service all equipment when necessary
- Conserve resources and supplies to facilitate minimum waste
- Assembled Endoscopic Vessel Harvesting System and Peacemaker.
- Operate laser welding.
- Replace or repair worn, defective or damaged components using hand tools, gauges and testing equipment.
- Assemble parts or units, position, align, and fasten units to assemblies, subassemblies or frame using hand or power tools.
- Read blueprint and specifications to determine components parts and assembly sequences of electromechanical units.
- Measure parts to determine tolerances using precision measuring instruments such as micrometers, calipers, microscopes.
- Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.
- Positions parts and subassemblies by using templates or reading measurements.
- Assembles components by examining connections for correct fit; fastening parts and subassemblies.
- Keeps equipment operational by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
- Conserves resources by using equipment and supplies as needed to accomplish job results.
- Documents actions by completing production and quality forms.
- Use box cutter to remove prepackaged items and removal of zip ties.
- Unpack and replace price tag.
- Repack item in its original packaging and repack.
- Load pallet with finished product.
- Maintain daily quota of 10 pallets per day.
- Assembly of the reel section for the front of a combine harvester according to specifications.
- Installation of mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Assemble machines or equipment and attach vehicle parts or trim, using hand or power tools.
- break down old corvette suspension/steering parts
- Build Buses in accordance with blueprints.
- Install all parts required for each bus.
- Sign off on all finished jobs.
- Work overtime as required for job needs.
- Work in clean room bond tubing for medical devices
- Assemble medical kits that include blood bags, water transfusion bags, and other various medical items
- Certified on all 3 lines of Trima, off-line products and certified as a floater, CSP inspector
- Sign into computer system before working at stations, make changes to trace numbers on new products for FDA documents and flow line uses.
- Reviewed and provided trouble shooting steps to prevent and resolve all mechanical problems.
- Preform 3c/5s standards on a daily base throughout my shift to maintain all safety standards.
- Inspected seat parts for defects before loading them on to a jig and also before stocking the pallets.
- Assemble parts or units, and position, align, and fasten units to assemblies, suba-ssemblies, or frames, using hand tools and power tools.
- Ability to read and work from manufacturing drawings and schematics
- Familiarity with using automated testing quipments,soldering irons,crimping cables and other hand tools
- hands-on experience in wiring,soldering cables and wire harnesses
- Ability to adhere to all applicable company quality standards for cable assembly.
- Introduced a new method of packaging which reduced operation time by 40%
- Helped in the packing room to assemble boxes and pack them with product
- Depending on the production, the job may required fast, repetitive movement
- Package finished products and prepare them for shipment
- Attach labels
- Disassemble units to replace parts or to crate them for shipping. and mark identifying information on parts.
- Load the machines.
- Material handling/grabbing parts that are required to customers job.
- Finish product to customer request and to company standards and expectations.
- Work as a team with others.
- Work by myself and finish tasks.
- Use power tools drill, impact gun, nail gun etc.
- Cut and shape wraps to put on refrigerator units.
- Take safety training and complete courses for company standards and wear all required safety equipment.
- Fix damage product such as holes and scratches.
